LinkSprite Playgound - User contributions [en]

UHF middle range integrated reader

2022-10-31T23:03:34Z

Alvin: Created page with "== Introduction == The UHF RFID middle range reader is a high performance UHF integrated reader. Based on proprietary efficient digital signal processing algorithm, it suppo..."

== Introduction ==

The UHF RFID middle range reader is a high performance UHF integrated reader. Based on proprietary efficient digital signal processing algorithm, it supports fast tag read/write operation with high identification rate. It can be widely applied in many RFID application systems such as logistics, access control, and anti-counterfeit and industrial production process control system.

Main Page

2022-10-31T22:55:14Z

Alvin: Created page with "Wiki is an open information collection platform. Information of LinkSprite products and customer works will be hosted here, alive and ready for modification. Please feel free..."

Wiki is an open information collection platform. Information of LinkSprite products and customer works will be hosted here, alive and ready for modification. Please feel free to improve the contents, contributions from registered account would receive our appreciations.

Products-description

2022-10-31T22:52:27Z

Alvin:

== Microcontrollers ==
=== Arduino Shields ===

==== GSM/GPRS Shield====
*[[ATWIN Quad-band GPRS/GSM Shield for Arduino]] [SHD_GPRS_AW][101101005]
*[[Quad-band GPRS/GSM Shield for Arduino Mega]] [SHDM_GPRS_SM5100][101101020]
*[[SIM900 GPRS/GSM Shield]] [SHD_SIM900][101101029]

==== Wireless Shield ====
*[[CuHead Pro WiFi/Ethernet Shield with AirPlay/DLNA Audio for Arduino]] [SHD_WIFI_CUHPRO][101102002]

*[[Lora Radio Shield]] [SHD_LORA] [101101053]
*[[LoRa/GPS HAT for Raspberry pi]] [HAT_LORA/GPS_RPI] []
*[[ LoRa Mezzanine Card for 96board]] [SHD_lORA_96][101101054]

==== LCD Shield ====
*[[16 X 2_LCD_Keypad_Shield_for_Arduino V2]] [SHD_LCD_1602V2][101202016]
*[[Color Image LCD Shield for Arduino ]] [SHD_LCD_NOKIA]OR [SHD_LCD_NOKIA_WOLCD] [101101009]
*[[Touch LCD Shield]] [SHD_TOUCHLCD][101101027]
*[[4.5" E-paper Shield for Arduino/pcDuino ]] [SHD_EP4P5][101101038]
*[[2.04" E-paper Shield for Arduino/pcDuino]] [SHD_EP2P04][101101041]
*[[Graphic LCD4884 Shield For Arduino]][SHD_LCD4884]

==== GPS SD Shield ====
*[[GPS Shield with SD card slot for Arduino with configuration UART pins and external GPS antenna]] [SHD_GPSEXTAN_CONFUART][101102007]

==== Bluetooth Shield ====
*[[Bluetooth Shield for Arduino ]] [SHD_BLUETOOTH][101101033]
*[[Bluetooth 4.0 BLE Shield for Arduino]] [SHD_BLE4][101201004]
*[[Bluetooth 4.0 BLE Pro Shield for Arduino (Master/Slave and iBeacon)]][SHD_BLE4_Pro][101101133]
*[[BLE4.0 Nano Shield]][SHD_BLE_NANO][101101233]
*[[LinkNode D2]][LN_LND2][101101048]
*[[BLE Gateway Shield]][SHD_BLE4_GATEWAY][101101052]
*[[BLE gateway HAT for Raspberry pi]][SHD_BLE4_HAT_RPI][101101055]

====Interface Conversion Shield ====
*[[RS232 Shield V2 for Arduino ]] [SHD_RS232V2][101102012]
*[[RS485 Shield V2.1 for Arduino]] [SHD_RS485V2p1][101102013]
*[[USB Host Shield for Arduino]] [SHD_USB_HOST][101101018]
*[[CAN-BUS Shield for Arduino]] [SHD_CAN][101101044]

====LED Shield====
*[http://linksprite.com/wiki/index.php5?title=LED_Cube_Shield_for_Arduino 4x4x4 Light Cube Shield Kit for pcDuino/Arduino] [SHD_LEDCUBE][101101035]
*[[LoL Shield ]] [SHD_LOL][101101037]
*[[8X8X8 RGB LED Cube Shield]] [SHD_RGBLEDCUBE] [101101043]

====Robotics Shield====
*[[Motor Shield ]] [SHD_MOTOR][101101014]
*[[Motor Pro Shield For pcDuino ]] [SHD_MOTPRO][101101045]
*[[I/O Expander Shield with MCP23017]] [SHD_IO][101101039]
*[[27-Channel PWM Servo Shield]] [SHD_32PWMV0.1][101101042]
*[[NXT/EV3 Brick Shield for Arduino]] [SHD_EV3][101101046]
*[[Servo/Sensor Adaptor Shield for Arduino]] [SHD_SRVSEN_L84][101101047]
*[[Motor Driver Shield for Arduino (L293D chipset)]] [SHD_MOTOR_L293] [101201011]
*[[Power Distribution Shield]] [SHD_PBS][101101050]
*[[Solar Charger]] [SHD_SC][101101051]
*[[DIY 4-Axis Servos Control Palletizing Robot Arm Model for Arduino UNO MEGA2560]] [ARM_MEGA2560][218201001]
*[[Dobot Industrial Robotic Arm Desktop Robot V2.0]] [DOB-ARM_V2.0][215201002]

====Others Shield====
*[[Touch Shield for Arduino]] [SHD_TOUKEY][101101008]
*[[Gameduino for Arduino: A Game Adapter for Microcontrollers]] [SHD_FPGA_GAMEDUINO][101101015]
*[[Infrared Shield for Arduino]] [SHD_IR][101101011]
*[[Mamba - Narrow Band Powerline Communication Shield for Arduino]] [SHD_PLC_MAMBA][101101021]
*[[MIDI Shield for Arduino]] [SHD_MIDI][101101022]
*[[MQ2 Smoke Detector Shield for Arduino]] [SHD_MQ2][101101010]
*[[Screw Shield for Arduino]] [SHD_SCREW][101101019]
*[[NFC PN532 Shield]] [SHD_RFID_NFCPN532][101101001]
**[http://linksprite.com/wiki/index.php5?title=RFID_tag,_rewritable,_Mifare_1,_S50_(13.56MHz) RFID tag, rewritable, Mifare 1, S50 (13.56MHz)] [RFID_NFC_MIFARE][107201012]
*[[SD Shield ]] [SHD_SD] [101101026]
*[[Xbee Shield]] [SHD_XBEE][101101017]
*[[Relay Shield]] [SHD_RELAY][101101030]
*[[DC 5V Eight Channels Relay Breakout with Optoisolator]] [EIGHT_CHANNEL_RELAY_C41][143201001]
*[[DC 5V Four Channels Relay Breakout with Optoisolator]][BB_RELAY_4C][105201009]
*[http://linksprite.com/wiki/index.php5?title=Proto_Shield_Kits Proto Shield Kits for Arduino] [SHD_PROTOKIT][101101025]
*[[Protoshield for Arduino with Mini Breadboard]][SHD_PROTOMB][101201012]
*[[Proto Shield for Mega]] [SHDM_PROTO][101101023]
*[[Assembled Protoshield for Arduino]] [SHD_PROTOCUTE][101101040]
*[[Audio Jack Modem Arduino Shield for iPhone and Android]][SD_PHONEJACK][127201001]
*[[CuteDigi JoyStick Shield]] [SHD_JOYSTICK][101201007]
*[[Go-Between Shield]] [SHD_GOB][101201008]
*[[MP3 Shield for Arduino]][SHD_MP3_2][101201009]
*[[Wireless Intercom Walkie-Talkie Shield for Arduino/pcDuino]] [SHD_IERPH][101201010]
*[[SX1276 Shield]][SHD_SX1276][]

==== Camera ====
*[[OpenMV CAM Image Sensor]][CAM_OPENMV][208201003]

=== AVR Based Arduino ===

*[http://store.cutedigi.com/cuteduino-nano/ CuteDuino Nano] [MP_CDNANO][102201007]
*[http://store.cutedigi.com/cuteduino-uno-usb-board-r3/ CuteDuino UNO USB Board R3] [MP_CDUNO][102201008]
*[[CuteDuino MEGA2560 R3]] [][]
*[[Arduino Yun Compatible IO Gateway]] [MP_YUNCOM][102201003]
*[http://store.linksprite.com/wireless-gamepad-v2-0-for-arduino/ Wireless GamePad V2.0 for Arduino][MP_WLGP][102201005]
*[http://store.cutedigi.com/makey-makey-an-invention-kit-for-anyone/ Makey Makey - An Invention Kit for Anyone] [KIT_MAKMAK][108201015]
*[[PicoBoard]] [MP_PICOB][102201011]

=== ARM Based Arduino ===
*[[Spruce LCD]] [MP_SPRUCE_WLCD][102101004]
*[[Spruce]] [[MP_SPRUCE_WOLCD][102102004]

=== FPGA Based Arduino ===
*[[Papilio 500K]] [FPGA_PAP_500K][110101001]
*[[Papilio Pro]] [FPGA_PAP_RO][110101006]
*[[Papilio I/O Wing]] [FPGA_PAP_IOWIG_BPW5015][110101002]
*[[Papilio VGA Wing]] [FPGA_PAP_VGA_BPW5017][110101003]
*[[Papilio B/LED Wing]] [FPGA_PAP_LED_BPW5007][110101004]
*[[Papilio LogicStart MegaWing]] [FPGA_PAP_LGS_BPW7003][110101005]
*[[Papilio MicroJoystick Wing]] [FPGA_PAP_MICJOYSTICK_BPW5038][110101007]
*[[RetroCade MegaWing]] [FPGA_PAP_RETROCADE_BPM7004][110101008]

=== pcDuino ===

*[http://www.pcduino.com/pcduino3core/ pcDuino3Core][MP_PCD3C][102108006]
*[[pcDuino3Core Evaluation Board]][MP_PCD3C_EVALBD][102202001]
*[[pcDuino3B]][MP_PCDUINO3B][102305006]
*[http://www.pcduino.com/pcduino3s/ pcDuino3S] [MP_PCDUINO3S][102107006]
*[[pcDuino3Nano]] [MP_PCD3NANO][102201009]
*[[pcDuino3Nano Lite]] [MP_PCD3NANOLT][102201109]
*[[pcDuino8 (Beta)]] [MP_PCDUINO8] [102109006]
*[[pcDuino8 Uno]] [MP_PCDUINO8_UNO] [102109008]
*[[Linksprite Acadia 3.0]] [MP_ACADIA3][102102009]
*[[pcDuino4 Nano]] [MP_PCD4NANO][102201019]
*[[pcDuino9]][MP_PCDUINO9][]
*[[pcDuino9 中文]][MP_PCDUINO9_CHINESE][]
*[[Voltage Translation Board for pcDuino/Arduino V2]] [SHD_TPCDV2][101101036]
*[[HDMI to DVI cable for pcDunio]] [DVICAB_PCDUINO][108202002]
*[[HDMI to VGA cable with Audio for pcDuino]] [VGACAB_PCDUINO][108202001]
*[[Serial Debug Cable for pcDuino]] [CAB_USBTTL_PCDUINO][117301001]
*[http://linksprite.com/wiki/index.php5?title=RTC_Module RTC Module for pcDuino] [LINKER_RTC][118101009]
*[[SATA Cable With Power Connector for pcDuino3]] [CAB_PCDSATA][117201005]

====WiFi====

*[[WiFi Dongle for pcDuino]] [WIFI_PCDUINO][103201008]
*[[WiFi to Ethernet Bridge]] [WIFI_ETHBRIDGE][103201010]
*[[EDUP Mini WiFi Dongle for pcDuino/Raspberry Pi]] [WIFI_EDUP][103201009]

====Mouse and Keyboard====
*[[2.4GHz 2-IN-1 Wireless Air Mouse+Keyboard for pcDuino]] [PCD_AIRMOUSE][214201001]

====Camera====
*[[5MP CSI Camera for pcDuino3]] [CAM_CSI5MP] [208201002]
*[[Web Cam 3-axis Servo Kit for Real Time Video for pcDuino]][108202004] [KIT_WEBCAMSRV]=[WEBCAM_PCDUINO][108202004-1]+[FIX_SERVO_CAM][108202004-2]+[KIT_SRV][108202004-3]

==== Screen====
*[http://store.linksprite.com/2-8-usb-tft-touch-display-module-for-pcduino-raspberry-pi/ 2.8” USB TFT Touch Display Module For pcDuino/Raspberry Pi ] [LCD_2P8USB_L47][124201002]
*[[1024x600 7" LVDS LCD with Capacitive Touch for pcDuino3]] [LCD_7PTH4PCD3][124201007]

==== Kits ====

*[[AV Kit for pcDuino]] [KIT_AV_PCDUINO][108201012]
*[[AV Kit for pcDuino US Edition]] [KIT_AV_PCDUINO_US][108202012]
*[[Kit for Scratch for pcDuino3B]] [KIT_S4PB] [108301013]
*[[Starter Kit for pcDuino3B]] [KIT_PCDUINO3B][108402002]
*[[Learning Kit for Scratch for pcDuino(without pcDuino)]] [KIT_S4P_NOPCD][108302007]
*[[Stackable Header Kit for pcDuino3 Nano]]
*[[Cutedigi Project Kit A]] ［KIT_CUTE_PROJRCT_NANOA][108301014]
*[[OpenCV computer vision kit]] [KIT_P8_OPENCV][108401003]
*[[LinkSprite Scratch Linker Kits]][KIT_P3SCRT_AUS][108403003]
*[[Linux设备驱动开发套件]][KIT_linux_driver][108301019]
*[[ Home Automation Kits with pcDuino and BLE4.0]][KIT_HOME_AUTOMA][108301034]

==== USB Adaptors====
*[[ USB 2.0 Ethernet Adapter]] [CAB_ETHUSB][117201002]

==== ADC breakout board for pcDuino8 UNO ====
*[[ADC breakout board for pcDuino8 UNO]] [BB_ADC][105101022]

=== 96boards ===
*[[ 96 Board]]

==== 96 board kits====

*[[ Linker Mezzanine card starter kit for 96board]] [LINKER_96KIT][118301002]
*[http://linksprite.com/wiki/index.php5?title=Linker_Touch_Screen_For_96board HDMI screen with touch screen For 96board ][101201005]

==IoT ==

*[[Plug and Play P2P 16 Channels Relay Kit With WiFi and Dual RJ45 ports Connections]] [HA_16CHNRLY_L62 ]
*[[ESP8266 Serial WIFI Module]][ RF_ESP8266_RA5 ][213201001]
*[[ESP32 Breakout Board]][BB_ESP32][]
*[[SIM800L Quad-band Network Mini GPRS GSM Breakout Module]][ BB_SIM800L_ON2 ][105201024]

=== Bluetooth 4.0 BLE ===

*[[Bluetooth 4.0 BLE Sensor Tag/iBeacon Station NRF51822]] [BLE_SENTG]

=== IoT Kit ===

*[[Smartworld Solar Panel Sensor Kit Compatible with Arduino]] [KIT_SOLARSW ][108301016]
*[[Arduino dedicated wind sensor (Voltage output)]][KIT_WINDSENSOR][108301017]
*[[LinkSprite weather station]][KIT_WSTATION][108301023]
*[[IoT LED Strip Kit]][KIT_IOTLED]

=== LinkNode ===
*[[LinkNode R1: Arduino-compatible WiFi relay controller]][LN_RELAY1CH][211201006]
*[[LinkNode R4: Arduino-compatible WiFi relay controller]][LN_RELAY4CH][211201004]
*[[LinkNode R8: Arduino-compatible WiFi relay controller]][LN_RELAY8CH][211201005]
*[[LinkNode R4 ESP-12f ESP8266 WiFi relay controller IoT module]][LN_RELAY4CH][211201004]
*[[LinkNode R8 ESP-12f ESP8266 WiFi relay controller IoT module]][LN_RELAY8CH][211201005]
*[[LinkNode D1]] [LN_LND1][211201001]
*[[Mbed BLE Sensors Tag]] [LN_BLETAG][211201002]
*[[Linker Base Shield for LinkNode D1]][LINKER_D1BASE][]
*[[LinkNode Base Shield for LinkNode D1]][LN_D1BASE][[211202003]
*[[LinkNode core Esp8266 Kit]][LN_CORE_KIT][211301001]
*[[LinkNode core STM32 Kit]][LN_STM32_KIT][211301002]
*[[LinkNode D1 ESP8266 Sensor Kit]][LN_D1_ESPSENSOR_KIT][211301003]
*[[Smart Watering Kit]][LN_WATERING_KIT][211301004]
*[[LinkNode Base Shield For Xduino]][LN_BASE_XDUINO][]

===== LinkNode Sensors =====
*[[LinkNode Light Sensor Module]][LN_LIGHT][211101003]
*[[LinkNode Relay 1Channel Module]][LN_RELAY][211101004]
*[[LinkNode Rotary Potentiometer Module]][LN_ROTARY][211101005]
*[[LinkNode Buzzer Module]][LN_BUZZER][211101006]
*[[LinkNode Temperature and Humidity Sensor Module]][LN_TEM&HUM][211101007]
*[[LinkNode Pressure Sensor Module]][LN_BMP280][211101008]
*[[LinkNode Infrared Emitter Module]][LN_INFEM][211101009]
*[[LinkNode 12mm Button Module]][LN_BUTTON][211101002]
*[[LinkNode 4-Digit 7-Segment Module]] [LN_4D7S] [211101010]
*[[LinkNode 5mm Red LED Module]][LN_5MMRED][211101001]
*[[4P Cables]][LN_CAB4P][211201011]

=== WRTnode ===
*[[WRTnode]] [WRTNODE_WRTNODE][201201006]
*[[WRTnode Standard Shield]] [SHD_WRTNODE][101101049]
*[[WRTnode Dev Cables Kit]] [WRTNODE_CAB_KIT][108201011]
*[[WRTnode2R Dev Kit]] [WRTNODE_2R_KIT][108201016]

===EMW3165 WiFi===
*[[EMW3165 WiFi Module]]

=== PSTN CALLER ID MODULE FOR ARDUINO/PCDUINO ===
*[[PSTN CALLER ID MODULE FOR ARDUINO/PCDUINO]][BB_PSTN][105201010]

== Raspberry Pi Kits ==
*[[Raspberry Pi B+]][RAS_PI_B][120201008]
*[[Raspberry Pi 3 Model B 1GB RAM 1.2GHz Quad Core CPU]][RAS_PI_3_B][120201032]
*[[RS232/GPIO Shield for Raspberry Pi V3.0]] [SHD_RPI_RS232GPIOV3] [101203001]
*[[RS485/GPIO Shield for Raspberry Pi V3.0]] [SHD_RPI_RS485GPIOV3][101203002]

*[[TTL UART to USB Cable - Serial USB Debug Cable]] [CAB_RPIUARTUSB][117201001]

*[[Linker kit Base Shield for Raspberry Pi with ADC Interface V3.0]] [LINKER_RPIBASEV3][118103020]
*[[Linker kit Base Shield for Raspberry Pi B+/2B/3 with ADC Interface V3.1]] [LINKER_RPIBASEV3.1] [118103120]
*[[LinkerKit for Raspberry Pi]] [LINKERKIT_RPI][118301001]
*[[Raspberry Pi microSD Card Adaptor]] [RPI_MSDADP][120201006]

*[[7" TFT Color LCD with RCA video input for Raspberry Pi ]] [LCD_7INCH_RCA][124201001]
*[[Adhesive Aluminium Heatsink(3 piece)]] [ALU_HEATSINK_3][146201001]
*[[High Quality Clear Case with Cooling Fan]] [COM_CASE_RAS_CLEAR][114201017]

*[[Raspberry Pi Sense HAT - AstroPi]] [RPI_ASTROPI][120201028]

*[[Raspberry Pi 3 Camera Kit - Clear Case Cooling Fan SD Card Breadboard HDMI GPIO]][RPI_CAMERA_KIT][120201029]

*[[Raspberry Pi 3 Ultimate Kit : Case with Fan + 8GB SD + Breadboard + HDMI + 40 Pins GPIO +Aluminium Heatsink]] [RPI_ULTIMATE_KIT][120201030]

*[[Raspberry Pi 3 -QUAD Core Clear Case Cooling Fan SD Heatsink HDMI Complete Kit]] [RPI_QUAD_KIT][120201031]

===HAT and Accessories for Raspberry Pi B+/ Raspberry Pi 2===
*[http://store.linksprite.com/raspberry-pi-b-to-arduino-adapter-hat-for-raspberry-pi-b/ Raspberry Pi B+ to Arduino Adapter HAT for Raspberry Pi B+/ Raspberry Pi 2] [RPI_ARDCON_PLUS] [120201009]
*[http://store.linksprite.com/gpio-extension-hat-for-raspberry-pi-b/ GPIO Extension HAT for Raspberry Pi B+/ Raspberry Pi 2] [RPI_GPIOEXIT_PLUS] [120201010]
*[http://store.linksprite.com/raspberry-pi-b-2x20p-to-raspberry-pi-b-2x13p-converter/ Raspberry Pi B+/ Raspberry Pi 2 2x20P to Raspberry Pi B 2x13P Converter] [RPT_RPIBPLUS2B] [120201011]
*[http://store.linksprite.com/gpio-reference-board-for-raspberry-pi-b/ GPIO Reference Board for Raspberry Pi B+/ Raspberry Pi 2] [RPI_GPIOREF_PLUS] [120201012]
*[http://store.linksprite.com/screw-protoshield-for-raspberry-pi-b/ Screw Protoshield for Raspberry Pi B+/ Raspberry Pi 2] [RPI_SRWPRO_PLUS] [120201013]
*[http://store.linksprite.com/av-cable-for-raspberry-pi-b/ AV Cable for Raspberry Pi B+/ Raspberry Pi 2] [RPI_AVCAB_PLUS] [120201014]
*[http://store.linksprite.com/cutedigi-gpio-breakout-for-raspberry-pi-b/ GPIO Breakout for Raspberry Pi B+/ Raspberry Pi 2] [RPI_GPIOBB_PLUS] [120201015]
*[http://store.linksprite.com/cutedigi-t-shape-gpio-breakout-for-raspberry-pi-b/ T-shape GPIO Breakout for Raspberry Pi B+/ Raspberry Pi 2] [RPI_CDGPIOBB_RPIBP] [120201016]
*[http://store.linksprite.com/gpio-breakout-kit-for-raspberry-pi-b/ GPIO Breakout kit for Raspberry Pi B+/ Raspberry Pi 2] [RPI_KIT_RPIBPLUS] [120201017]
*[http://store.linksprite.com/gpio-ribbon-cable-for-raspberry-pi-b/ GPIO Ribbon Cable for Raspberry Pi B+/ Raspberry Pi 2] [RPI_GPIOCABLE_PLUS] [120201018]
*[http://store.linksprite.com/abs-plastic-enclosure-for-raspberry-pi-b-black/ ABS Plastic Enclosure for Raspberry Pi B+ / Raspberry Pi 2(Black)] [RPIBP_CSBLK_R11] [120201019]
*[http://store.linksprite.com/plastic-enclosure-for-raspberry-pi-b-white/ Plastic Enclosure for Raspberry Pi B+ (White)/ Raspberry Pi 2] [RPIBP_CSWHT] [120201020]
*[http://store.linksprite.com/black-alumina-enclosure-for-raspberry-pi-b/ Black Alumina Enclosure for Raspberry Pi B+/ Raspberry Pi 2] [RPIBP_CS_ALUCS] [120201021]
*[[3.2 INCH TFT LCD SCREEN FOR RASPBERRY PI B+/RASPBERRY PI 2]][RPIBP_SCREEN_3.2][120201027]
*[[SIM800 GSM/GPRS HAT for RPI 2/2B/3]] [RPI_SIM_GSM][120201025]
*[[GSM/GPRS /3G 15cm Long IPEX Connector (3DBI) PCB Small Antenna]] [ATNA_GSMPCB][145201001]

====Camera====
*[[Raspberry Pi Camera Module 5MP Wide Angle 160 degree]] [RPI_5MCAMWD_LR2] [120201022]
*[http://store.linksprite.com/a-pair-of-infrared-leds-for-raspberry-pi-camera-module-5mp-wide-angle-160-degree/ A Pair of Infrared LEDs for Raspberry Pi Camera Module 5MP Wide Angle 160 degree] [RPI_CAMINFLED] [120201023]

*[http://store.linksprite.com/raspberry-pi-camera-module/ Raspberry Pi Camera Module] [RPI_CAM_MOD] [120201026]

== Arduino Kits ==

*[[LinkerKit]][LINKER][118101001]-[118201003]
*[[Sensors Pack for Arduino]] [KIT_SENPACK][108301010]
***[[Hall Effect Sensor]] - for sensing a magnet [KIT_SENPACK_COM_HALL][108201002]
*[[Advanced Sensors Kit for Arduino ]] [ADVSEN_KIT][149201001]
*[[Advanced Learning Kit for Arduino]] [ADVLEN_KIT][149201002]
*[[LED Matrix Kit]] [KIT_LEDMATRIX][108101001]
*[[LinkSprite Sensor Pack 101]]
*[[Introductory Kit with Clear Case for Arduino]] [INTOKIT_CLEARCASE][150201001]
*[[Scratch IO Shield Kit for Scratch for Arduino]] [KIT_SRIO][108301005]
*[[Learning Kit for Scratch for Arduino (S4A)]] [KIT_S4AADV][108301004]
*[[Temperature kit for Diamondback]] [KIT_DIA_TEM]
*[[The Global Car Tracking Kit]]
*[[Drawdio Kit]][KIT_DRAWDIO][108101006]
*[[CuteDigi Starter Kit for Arduino ---Beginner Full Package]] [KIT_ARDUINO_BFPACK][108301015]
*[[Smartworld Solar Panel Sensor Kit Compatible with Arduino]]
*[[Linker Mezzanine card starter kit for 96board]]
*[[S4A Kit Scratch for Arduino]][KIT_S4APICO][108401005]
*[[Remote controller kit]][KIT_REMOTE_CON][108301021]
*[[Analog pH Meter Kit]][KIT_PH_METER][108301025]

==Beagleboard Kits==

*[[Linker kit Base Cape for Beagleboard]] [LINKER_BGLBASE][118101029]

== Components and Breakout Boards ==

===Components===

====GPS====
*[[GPS module SKM58]] [GPS_SKM58][116201002]
*[[GPS Patch Antenna (IPX interface with pig tale length 7cm)]] [ANT_GPS_PAT]
*[[Serial port bluetooth module (Master/Slave)]]
*[[ RFID Card with UID Rewritable ]]
*[[ 7400 Series Kit , 5pcs]]

====ICs====
*[http://store.linksprite.com/shift-register-8-bit-74hc595/ Shift Register 8-Bit - 74HC595][74HC595_KB14]
*[http://store.linksprite.com/mcp23017-i2c-16-input-output-port-expander/ MCP23017-i2c 16 input/output port expander][MCP23017_KB15]

====Breadboard====
*[[Mini Breadboard Mini Self-Adhesive for Arduino (White)]] [PRT_MINIBRD_WHITE][130201001]
*[[Mini Breadboard Mini Self-Adhesive for Arduino (RED)]] [PRT_MINIBRD_RED][130202001]
*[[Mini Breadboard Mini Self-Adhesive for Arduino (BLUE)]] [PRT_MINIBRD_BLUE][130203001]
*[[Mini Breadboard(400 holes)]][PRT_MINIBRD_400HOS][130201002]
*[[MB-102 Breadboard]] [PRT_MINIBRD_102][130201003]

====Antenna====
*[[GSM/3G Antenna]] [ANT_GSM3G][123201001]

====Button====
*[[Momentary Push Button Switch - 12mm Square]] [12MM_BUTTON_KB5]
====Infrared====
*[[Sharp GP2Y0A21YK0F Analog Distance Sensor 10-80cm]] [GP2Y0A21_D12]

====Tapes====
*[[Copper Tape -5mm (50ft)]][COM_CUTP5MM][114201011]
*[[Copper Tape -8mm (50ft)]][COM_CUTP8MM][114201012]

====Cable====
*[[USB microB Cable - 6 Foot]] [CAB_uB][117201004]
*[http://store.linksprite.com/usb-cable-a-to-b-3-foot/ USB Cable A to B - 3 Foot][CAB_USB_AB_3_J2][117201008]
*[http://store.cutedigi.com/cat-5e-ethernet-cable-rj45/ Cat 5E Ethernet Cable RJ45][CAB_ETHCAT5E][117201006]
*[[HDMI Cable]] [CAB_HDMI][117201007]

=====RF cable=====
*[[Male N-J to MMCX-J Interface Cable]] [RFID_CAB_MNJ2MMCXJ ] [107201004]

=== Case and Enclosure===

*[[ Arduino Uno Assorted Lego Style Enclosure ]] [COM_CASE_ARDULEGO][114201007]
*[http://store.linksprite.com/aluminum-blue-box-for-wireless-device/ Aluminum Blue Box for Wireless Device ] [ALU_CASE_BLUE_C12]
*[http://linksprite.com/wiki/index.php5?title=LinkSprite_Clear_Enclosure_for_pcDuino LinkSprite Clear Enclosure for pcDuino/Arduino] [COM_CASE_PCDUINO_CLEAR] [114201005]
*[[LinkSprite Black Enclosure for pcDuino and arduino]] [COM_CASE_PCDUINO_CLEAR_B][114202005]
*[http://linksprite.com/wiki/index.php5?title=LinkSprite_Extension_Plate_for_Clear_Enclosure_for_Arduino LinkSprite Extension Plate for Clear Enclosure for pcDuino/Arduino] [COM_CASE_ARDU_CLEAR_PLATE][114201003]
*[[LinkSprite Extension Plate for Black Enclosure for pcDuino and Arduino]] [COM_CASE_PCDUINO_CLEAR_PLATE_B][114202003]
*[[Acrylic Clear Enclosure for pcDuino3]] [COM_ACCASE_PCDUINO3][114201010]
*[[Acrylic Clear Enclosure for pcDuino3 Universal Edition]] [COM_ACCASE_PCDUINO3_UE] [114202010]
*[[Acrylic Baffle Plate for pcDuino V2]][CASE_PCDV2END][128201001]
*[[Acrylic Clear Enclosure for pcDuino3Nano]] [COM_ACCASE_PCDUINO3NANO] [114201014]
*[[Acrylic Clear Enclosure for Linksprite Acadia 3.0]] [COM_ACCASE_ACADIA3.0] [114201016]
*[[Plastic Mounting Plate for pcDuino/Arduino With Rubber Feet]] [114201015]

===Breakout===

==== SD/MicroSD ====
*[[Breakout Board for microSD Transflash]] [BB_MINISD][105101004]
*[[SD Card Breakout Board]] [BB_SD][105101003]
*[[micro 8GB SD Card]] [MICRO_8GB_SD_CARD][]

====SIM ====
*[[Breakout Board for SIM Cards]] [BB_SIM][105101021]

==== MP3/Music/Voice ====
*[[Serial Port Voice Recognition Module]] [BB_SERVOICE] [105201001]
*[[Serial Port Voice Recognition Module V2]] [BB_SERVOICE V2] [105202001]
*[[Speak Recognition, Voice Recognition Module V3]] [BB_SERVOICE V3][105203002]
*[[Breakout Board for ADMP401 MEMS Microphone]] [BB_ADMP401][105101002]
*[[Breakout Board for Si4703 FM Tuner]] [BB_FM_SI4703][105101007]
*[[Serial port controllable MP3 module ]] [BB_SERIAL_MP3][105201008]

==== USB ====
*[[Xbee USB Adapter]] [BB_XBEE_MINIUSB][105101006]
*[[Breakout Board for FT232RL USB to TTL 5V]] [BB_MINIUSB_TTL][105101005]

==== 2.4GHz Wireless ====
*[[NRF24L01 2.4GHz transceiver Breakout Board]] [BB_NRF24L01][105201007]

==== Xbee====
*[[Xbee Socket to Xbee Socket Evaluation Board]] [BB_UART2UART][105101013]
*[[Xbee socket UART to RS232]] [BB_XBEE_UART2RS232][105101009]
*[[Xbee socket UART to RS485]] [BB_XBEE_UART2RS485][105101010]
*[[Xbee socket UART to USB]] [BB_XBEE_UART2USB][105101008]
*[[Breakout Board for XBee Module with 5V interface to 3.3V Xbee]] [BB_XBEE_5_2_3P3][105101014]
*[[BluetoothBee]] [BB_XBEE_BLUETOOTH][105101017]
*[[Bluetooth 4.0 BLE Pro Xbee Form factor (Master/Slave and iBeacon)]][BB_XBEE_BLE4][105101117]
*[http://store.linksprite.com/xbee-breakout/ Xbee Breakout ] [BB_XBEE_B30][105101020]

==== RJ45 ====

*[[RJ45 8-pin Connector and Breakout Board Kit]] [BB_RJ45_KIT][105101015]

==== GPS ====
*[[GPS Bee]] [BB_GPSBEE][105201002]

==== Sensors ====
===== Infrared=====
*[[Infrared Remote Control and Receiver]]
===== Light Sensor =====
*[[TEMT6000 Breakout Board]] [BB_TEMT6000][105101016]
*[http://store.linksprite.com/uv-sensor/ UV Sensor] [SEN_UV][115201002]

===== Accelerometer =====
*[[ ADXL335 Triple-Axis Accelerometer]] [BB_ADXL335][105101018]
*[http://linksprite.com/wiki/index.php5?title=BMP085_9-axis_IMU_Module 9 Degrees of Freedom IMU] [BB_9AX_IMU_BMP085][105201006]

=====Current=====
*[[Coupling Transformer Current Sensor Breakout]] [SEN_CURCOU]][115201005]

=====Distance=====
*[[Ultrasonic Range Sensor]] [SEN_DIS_ULTRA][115101001]
*[[Ultrasonic Sensor Breakout SRF04]] [SEN_DIS_ULTRA_B][115102001]

=====ID=====
*[[Silicon Fingerprint Scanner]] [SEN_ID_FP_SCAN][115201001]
*[[Silicon Fingerprint Area Sensing Module]] [SEN_ID_FP_AREA][115201001]

=====Air Quality=====
*[[Dust Sensor]] [SEN_DUSTPPD42NS][115201003]
*[[Breakout of Hydrogen Sensor MQ8 with Digital and Analog Output]] [BB_MQ8][105201025]

===== Force=====
*[[Force Sensitive Resistor 0.5"]] [KIT_SENPACK_COM_FSR][108201001]

=====Water=====
*[http://linksprite.com/wiki/index.php5?title=Water_Level_Sensor Liquid Level Sensor] [BB_SEN_PCBLIQUID][105201005]
*[[Water Flow Sensor]][SEN_WATER_FLOW][115201004]

=====Temperature/Humidity=====
*[[Humidity and Temperature Sensor - SHT15 Breakout]] [BB_SEN_SHT15][105201004]

=====Bump=====
*[[Bump Detector - SHT15 Breakout]] [SEN_BUMPDETEC][TBD][115201006]

=====Other Sensor=====
*[[MAG3110 electronic compass module three axis magnetic sensor magnetometer]] [SEN_MAG3110][115201007]

====RTC====
*[[DS3234 Breakout Board]] [BB_DS3234][105201003]

====Power Supply====
*[[DC to DC step down with a output of 5V@5A]] [BB_POWDC2DC_5V5A][105101019]

*[[Serial UART 16x2 LCD]] [BB_SERLCD_1602G][105101001]
**[[Serial UART 16x2 LCD 3.3V]] [LCD_16_2_3.3V][124101001]
*[[FIR: Gainspan WiFi Module with Xbee Breakout]] [WIFI_MOD_FIR][103101001]
*[[TTL Level Shifter]] [BB_TTLLT][105101011]
*[[USB LiPoly Charger - Single Cell]] [BAT_USBCHARGER][106101001]
*[[Embedded Serial Web Server Module]] [BB_ETH_WS][105101012]

==== RFM69 WIRELESS TRANSCEIVER ====
*[[RFM69 WIRELESS TRANSCEIVER: 868MHZ, 13DBM]] [RFM69_868][212201002]
*[[RFM69 WIRELESS TRANSCEIVER: 915MHZ, 13DBM]][RFM69_915][212201003]
*[[RFM69 WIRELESS TRANSCEIVER: 433MHZ, 13DBM]][RFM69_433][212201001]
*[[RFM69HW WIRELESS TRANSCEIVER: 915MHZ, 20DBM]][RFM69HW_915][212202003]
*[[RFM69HW WIRELESS TRANSCEIVER: 868MHZ, 20DBM]][RFM69HW_868][212202002]
*[[RFM69HW WIRELESS TRANSCEIVER: 433MHZ, 20DBM]][RFM69HW_433][212202001]

===Labels===
====Socket Label====
*[[Arduino Sockets Labels]] [COM_ADRSOKLEB][114201013]

===Socket===
*[[Mating Socket for pcDuino3C Core Board]] ［SOK_COM_PCD3C][133201001]

== Lighting LEDs ==

*[[LED strip driver]] [LED_SPDRV][109101001]
*[[LED PWM Dimmer Constant Current Driver (DC: 12V -48V)]] [LED_CHAMELEON_I_48V][109201007]
*[[LED PWM Dimmer Constant Current Driver (DC:12V -200V)]] [LED_CHAMELEON_II_200V][109201008]
*[[LED Strip]][LED_STRIP][]

*[[8X8 RED LED Matrix ]] [LED_8X8_Matrix_RED]
*[[BLACK UNIVERSAL PORTABLE USB BENDABLE LED LIGHT PC LAPTOP POWER BANK]]
*[[BLUE UNIVERSAL PORTABLE USB BENDABLE LED LIGHT PC LAPTOP POWER BANK]]
*[[GREEN UNIVERSAL PORTABLE USB BENDABLE LED LIGHT PC LAPTOP POWER BANK]]
*[[ORANGE UNIVERSAL PORTABLE USB BENDABLE LED LIGHT PC LAPTOP POWER BANK]]
*[[PINK UNIVERSAL PORTABLE USB BENDABLE LED LIGHT PC LAPTOP POWER BANK]]
*[[PURPLE UNIVERSAL PORTABLE USB BENDABLE LED LIGHT PC LAPTOP POWER BANK]]
*[[RED UNIVERSAL PORTABLE USB BENDABLE LED LIGHT PC LAPTOP POWER BANK]]
*[[WHITE UNIVERSAL PORTABLE USB BENDABLE LED LIGHT PC LAPTOP POWER BANK]]

==LCD==
*[[Basic 20x4 Character LCD - Black on Green 5V ]] [LCD_20_4_5V] [124201003]
*[[Basic 16x2 Character LCD - Black on Green 5V]] [LCD_16_2_5V] [124201004]
*[[Color LCD 128x128 Nokia Knock-Off]] [LCD_NOKIA_6100][124201005]

*[http://store.linksprite.com/spi-i2c-serial-16x2-character-lcd-backpack/ SPI/I2C Serial 16x2 Character LCD Backpack] [LCD_SPI2C_1602BP][124201006]

==EL==

*[http://store.linksprite.com/5v-usb-inverter-for-el-up-to-3-meters-of-el/ 5V USB Inverter for EL - Up to 3 meters of EL][POW_USBEL_Q30][126201001]

== JPEG Cameras ==
===JPEG Camera Without case===
*[http://linksprite.com/wiki/index.php5?title=JPEG_Color_Camera_Serial_UART_Interface_(TTL_level) JPEG Color Camera Serial Interface (TTL level)] [CAM_JPEG_TTLUART][201201001]
*[[JPEG Color Camera Serial Interface (RS232 level)]] [CAM_JPEG_RS232][201201002]
*[[JPEG Color Camera Serial Interface(RS485)]] [CAM_JPEG_RS485][201201003]
*[[JPEG 2M Pixel Color Camera Serial Interface V2 (TTL level)]][CAM_JPEG_2M_TTLUART_V2][201202004]
*[[JPEG 2M Pixel Color Camera Serial Interface V2 (RS232 level)]][CAM_JPEG_2M_RS232_V2][201202005]

*[[JPEG Color Camera Serial Interface with Built-in Infrared (TTL level)]] [CAM_JPEG_IR_TTLUART][202201001]
*[[JPEG Color Camera Serial Interface with Built-in Infrared (RS232 level)]] [CAM_JPEG_IR_RS232][202201002]
*[[JPEG Color Camera Serial Interface with Built-in Infrared (RS485 level)]] [CAM_JPEG_IR_RS485][202201003]

*[[Lens of 90 degree view angle]] [CAM_LENS_JPEG_90D][206201001]
*[[180 Degree Wide Angle fisheye YUY2 5MP USB Camera for Linux/Windows]][CAM_FISHEYE_YUY2][207201001]

===JPEG Camera With case===

*[[JPEG 2M Pixel Color Camera Serial Interface V2 (TTL level) with black housing]][CAM_JPEG_2M_TTLUART_V2_BLK][201203004]
*[[JPEG 2M Pixel Color Camera Serial Interface V2 (RS232 level) with black housing]][CAM_JPEG_2M_RS232_V2_BLK][201203005]

*[[JPEG 2M Pixel Color Camera Serial Interface V3 (TTL level) with black housing]][CAM_JPEG_2M_TTLUART_V3_BLK][]
*[[JPEG 2M Pixel Color Camera Serial Interface V3 (RS232 level) with black housing]][CAM_JPEG_2M_RS232_V3_BLK][]

==RFID==

=== 13.4MHz RFID Modules ===
*[[ PN532 RFID Module]] [RFID_NFC_BB_PN532][107101002]
*[[RFID Reader/Write Module A (IIC interface)]] [RFID_NFC_HY502A][107201005]
*[[RFID Reader/Write Module B (SPI interface)]] [RFID_NFC_HY502B][107201006]
*[[RFID Reader/Write Module C (UART interface)]][RFID_NFC_HY502C][107201007]
*[[MIFARE RC522 CARD READ ANTENNA RF RFID READER IC CARD PROXIMITY MODULE]][RFID_RC522][107201022]
*[[13.56MHZ RFID Reader/Writer Module V4-- Ultralight]][RFID_NFCKIT][107201021]

===Tag===
*[[RFID tag, rewritable, Mifare 1, S50 (13.56MHz)]] [RFID_NFC_MIFARE][107201012]
*[http://store.cutedigi.com/13-56mhz-water-droplets-transparent-nfc-key-tag/ 13.56MHz Water Droplets Transparent NFC Key Tag] [SEN_NFCTKEYTG] [107201020]

=== UHF RFID Modules and Integrated Readers===
====Module====
*[[Cottonwood: UHF Long distance RFID reader module]][RFID_UHF_TTL_CW][107101001] or [RFID_UHF_USB_CW][107102001]

*[[Cottonwood-QM100 UHF RFID Module]][RFID_UHF_QM100_CW][107301001]

==== Antenna ====
*[[5dBi PCB UHF RFID 902-928M Antenna 5cm x 5cm]] [RFID_UHF_AN5DB][107101003]
*[[LinkSprite UHF RFID Reader Antenna (902-928MHz, 8dBi RHC Pol)]] [RFID_UHF_AN8DBMINI][107201002]
**This includes [[Male N-J to MMCX-J Interface Cable]] [RFID_CAB_MNJ2MMCXJ ] [107201004]
*[[UHF RFID Reader Antenna (902-928MHz, 8dBic LHC Pol)]] [RFID_UHF_AN8DN_S9028PCL][107201001]
**[[SMA to MMCX Interface Cable ]] [RFID_SMA_MMCX_ADAPTER][107201003]

====Tag ====
*[[UHF RFID tag, EPC Gen2 (900MHz)]] [RFID_UHF_CARDTAG_LS0831][107201008]
*[[UHF RFID tag for metal surface and Vechile, EPC Gen2 (900MHz)]] [RFID_UHF_METALTAG][107201013]
*[[Key Tag UHF RFID tag , EPC Gen2 (900MHz)]] [RFID_UHF_KEYTAG][107201015]
*[[UHF RFID tag for Vechile Licenser Plate, EPC Gen2 (900MHz)]] [RFID_UHF_PLATETAG][107201014]
*[[UHF RFID tag for flex surface (tape on back) Nontransparent , EPC Gen2 (900MHz)]] [RFID_UHF_FLEXNONTRANTAG][107201011]

====Integrated UHF Reader ====
*[[UHF middle range integrated reader]] [CF-RU5106]

== Tools ==

=== VOLTAGE AND CURRENT METER ===
*[[VOLTAGE AND CURRENT METER FOR USB PORT]][PMETER_USB][]

===Wall Adapters===
*[[AC 100-240V 0.3A DC 5V 2A US Plug USB Power Supply Wall Adapter]][POW_5V2AUSB_P7][126201002]
*[[AC 100-240V 0.3A DC 5V 2A US Plug USB Power Supply Wall Adapter 2.0]] [POW_5V2AUSB_P7_2][126202002]
*[[AC 100-240V 0.3A DC 5V 2A Europe/China Plug USB Power Supply Wall Adapter]] [POW_5V2AUSB_EU][126201003]
*[[AC 100-240V 0.3A DC 5V 2A USB Plug USB Power Supply Wall Adapter with Micro USB connector ]][POW_5V2AUSBMIRCO_US][126201005]
*[http://store.cutedigi.com/universal-to-uk-power-plug-adapter/ Universal to UK Power Plug Adapter][TOL_PW_UNI2UK ] [125201003]
*[[AC 100-240V 0.3A DC 5V 2A Australia Plug USB Power Supply Wall Adapter]] [POW_5V2AUSB_AUS][126201006]
*[[Wall Adapter Power Supply - 12VDC 1A]] [P0W_12VDC_1A][126201007]
*[[Wall Adapter Power Supply - 5VDC 2A]] [POW_TL_5V2A][126201008]
*[[Wall Adapter Power Supply - 5VDC 4A]] [POW_5VD_4A][126201009]
*[[Embedded AC to 12V Power Supply Module]] [EM_POWAC2DC_12V][126301001]

===Hub===
*[[4 Port USB Hub]] [TOL-USBHUB-4PT][125201004]

===Battery===
*[http://store.cutedigi.com/stylish-usb-battery-pack-for-pcduino-raspberry-pi-3700mah-5v-1a/ Stylish USB Battery Pack for pcDuino/Raspberry Pi-3700mAh-5V@1A ][BAT_3700][106201002]

===Organizer===
*[http://store.cutedigi.com/plastic-box-for-components-kit-5-5x3-5x1-5/ Plastic Box for Components Kit 5.5"x3.5"x1.5"] [TL_BX5P5_3P5_1P5][209201001]
*[[ Plastic Box for Components Kit 6.88"x5.9"x1.69" (175mmx150mmx43mm)]] [TL_BX_6P8_5P9_1P6][209201002]
*[[ Plastic Box for Components Kit 8.85"x6.10"x2.28" (225mmx155mmx58mm)]] [TL_BX_8P8_6P1_2P2][209201003]
*[[Orange Plastic Box for Components Kit(251mm x 80mm x 56mm)]] [TL_BX_2P5_8P0_5P6][209201006]

===Signal Generators===
*[http://store.linksprite.com/mini-dds-function-generator/ Mini DDS Function Generator] [TOL_FG085_Q17][125201005]

===Programmer===
*[[Silabs Compatible USB Debug Adapter]] [SILAB_USB_DEBUG_ADAP] [117201009]
*[http://store.cutedigi.com/altera-usb-blaster-fpga-cpld-compatible-jtag-cable/ Altera USB Blaster FPGA CPLD compatible JTAG cable] [ALTERA_USB_BLASTER][134201001]

=== Engraver Machine ===
*[[DIY CNC 3 Axis Engraver Machine PCB Milling Wood Carving Router Kit Arduino Grbl]][KIT_CNC][108301018]
*[[DIY CNC 3 Axis Engraver Machine PCB Milling Wood Carving Router Kit Arduino Grbl Assembled Version]][KIT_CNC_ASSEMBLED][108302018]
*[[DIY CNC 3 Axis 2418 Engraver Machine PCB Milling Wood Carving Router Kit Arduino Grbl]][KIT_CNC_2418][108303018]
**[[Laser Head for DIY CNC 3 Axis Engraver Machine]][KIT_CNC_LASHA][108301020]
**[[Laser Head for DIY CNC 3 Axis Engraver Machine 2.5W ]][KIT_2.5W_CNC_LASHA][108302020]
**[[Mainboard Kit for DIY CNC 3 Axis Engraver Machine]][KIT_MAINBOARD][108301029]
**[[Spindle Motor Kit for DIY CNC 3 Axis Engraver Machine]][KIT_SPINDLE_MOTOR][108301030]
**[[Stepper Motor Kit for DIY CNC 3 Axis Engraver Machine]][KIT_STEPPER_MOTOR][108301031]
**[[Power Supply Kit for DIY CNC 3 Axis Engraver Machine]][KIT_POWER_SUPPLY][108301032]
**[[Parts and Components Kit for DIY CNC 3 Axis Engraver Machine]][KIT_COMPONENTS_CNC][108301033]
**[[ER11 Extension Rod Tool Holder Collet Chuck for DIY CNC 3 Axis Engraver Machine]][KIT_CNC_Collet_Chucks][108301035]

=== 3D Printer Machine ===
*[[LinkSprite DIY 3D printer Prusa i3 Kit]][KIT_PRUSA_I3][108301027]

*[[SLA 3D printer]][ ][ ]

*[[LinkSprite DIY 3D printer Prusa i3 Assembled Version with Laser Engraving Function]][PRUSA_I3_ASSEMBLED_LAS][ ]

=== Oscilloscope ===
*[[DSO138 DIY Kit]][TOL_DSO138][125201007]
*[[DSO 068 DIY kit]][TOL_DSO068][125201008]
*[[DSO 112 DIY kit]][TOL_DSO112][125201009]

=== Microscope ===
*[[Micro Capture Digital Microscope]][DIGITAL_MICROSCOPE][219201001]

== Books ==

*[[Getting Started With pcDuino]] [BOK_PCDCHN_1] [129201001]

== OpenWRT ==
*[[TL-WR703N Clone With OPENWRT, USB Camera Support, TTL UART]]

== Robotics ==
===Platform===

*[[LinkSprite Basic Robot Platform]]
*[http://linksprite.com/wiki/index.php5?title=Acrylic_Frame_Robot_Platform Acrylic Turtle 2WD Mobile Platform for Arduino/pcDuino ][KIT_ROT_T2WDACY][108301011]
*[[Scratch Egg Car]]

===Motor Driver ===
*[[DC Motor Driver Breakout (L298 Chipset)]] [BOT_MOTDRV_L298][104101001]

===LinkerBot===

*[[LinkerBot Platform]] [BOT_LB_PLATFORM][104201002]

===MiniBot===
*[[Minibot with Arduino Programming ]] [BOT_MINI][104201007]

===Servo===
*[[RB-65CS: Servo with 360 Degree freedom]][BOT_SERVO_65CS][104201003]
*[[RB-150CS: Servo with 360 Degree freedom ]][BOT_SERVO_150CS][104201004]
*[[DIY Spider Robot High-Teach Products Series ]][BOT_DIY_SPIDER][104201009]
*[[Plotclock DIY Robot with Arduino Uno Drawing Robot]][BOT_PLOTCLOCK][104201010]

===Camera===
*[[Mini Webcam for Robot Video Real Time Video Stream]] [WEBCAM_PCDUINO][108202004-1]
*[[Mini Webcam for Robot Video Real Time Video Stream V2.0]] [WEBCAM_PCDUINO_V2][108202005]

===Robot Battery===
*[[Battery for Robot 4800mAH]] [BAT_4800MHAH][106201001]
*[[Battery for Robot 4800mAH Europe Edition]] [BAT_4800MHAH_EU] [106202001]

===Parts===
*[[Ball Caster Metal]] [BOT_PT_OMNIDMETAL][104201008]
*[[Linker Block 12 Lego Holes Long Grooved Beam -Aluminium]] [LB_12HGB][132201001]
*[[Linker Block Curved Beam with 4 Holes]][LB_4HCVBEAM][132201002]
*[[Linker Block Side Beam with 6 Holes]][LB_SBM_6H][132201003]
*[[Linker Block 10*3 Lego Holes Long Grooved Beam -Aluminium]] [LB_10B3_GB][132201019]
*[[Linker Block 9*18 Lego Holes Sheet -Aluminium]][LB_9B18_SHT][132201004]
*[[Linker Block Shaft Connector]][LB_NODESHFT][132201005]
*[[Linker Block Passive Cross Shaft -Aluminium]][LB_PASSSHFT][132201006]
*[[Linker Block Shaft Collar]] [LB_SHAFTCOL][132201020]
*[[Linker Block DC Motor]] [LB_DCMOTOR][132201007]
*[[Linker Block Motor Fixture Plate -Aluminium]] [LB_MOTFIXPLATE][132201008]
*[[Linker Block 90 Degree Fixture With a Length of 3 Holes]][LB_RETFIX3HOLE][132201009]
*[[Linker Block 90 Degree Fixture With a Length of 6 Holes]][LB_RETFIX6HOLE][132201010]
*[[Linker Block Gear Wheel with a Diameter of 5.6cm]][LB_WHEEL5P6][132201011]
*[[Linker Block Tire a Diameter of 5.6cm]][LB_TIRE5P5][132201012]
*[[Linker Block Track]] [LB_TRACK][132201021]
*[[Linker Block Track Connector]][LB_TRKCON][132201013]
*[[Linker Block Screw Driver For Hexagon M4]][LB_M4_SWDRV][132201014]
*[[Linker Block M4x14 Bolt]][LB_M4X14_BOLT][132201015]
*[[Linker Block M4 Nut]][LB_M4_NUT][132201016]
*[[Linker Block Plastic Washer M4]][LB_M4_WH][132201017]
*[[Linker Block UN*16 Bolt]] [LB_UN16_BOLT][132201022]
*[[Linker Block UN Nut]] [LB_UN_NUT][132201023]
*[[Linker Block M2x5 Screw]] [LB_M2X5_SRW][132201018]
*[[Linker Block Grub Screw]] [LB_GRUB_SRW][132201024]

===Rover===
*[[Rover: WiFi Video Streaming Robot]] [BOT_ROVER][104201001]
*[[pcDuino Rover: WiFi Video Streaming Robot Kit]] [BOT_PDROVER_KIT][104201006]
*[[DC 12V to 5V Power Adaptor Module at 2A for pcDuino Robot]][POW_12VTO5V_H2][126101001]
*[[Acrylic Turtle 2WD Mobile Video Robot powered by pcDuino3 V2.0]] [KIT_BOT_T2WDACY_VIDEO_PD3_V2][108401006]

*[[Battery case for Rover]][TOL-BATHOLD][125201006]
*[[pcDuino ASU VIPLE Robot-中文]][KIT_PCD_ROBOT_CHINESE][108301022]
*[[pcDuino ASU VIPLE Robot]][KIT_PCD_ROBOT][108302022]
*[[pcDuino ASU VIPLE Robot V2.0]][KIT_PCD_ROBOT_V2][108303022]
*[[Cloud Companion P2P WiFi Remote Control HD Video Car]][KIT_CLOUD_COMPA][108301024]

===Motor===
*[[Stepper Motor with Cable]] [STEPPER_MOTOR][131201001]

===Robotic Arm===
*[[Robotic Arm]]

===Linker Block Set===
*[[Linker Block Basic Robot Platform Set A]] [KIT_LB_BASROT_A][108301008]
*[http://linksprite.com/wiki/index.php5?title=PcDuino_Metal_Lego_Video_Tank Linker Block Tank Robot Platform ] [KIT_LB_BASROT_B]108302008]

=== Robot Toy ===

*[[Six pieces of DIY toy assembly kit ]] [DIY_SIX_KIT][142201001]

=== Cube Solver Robot ===
*[[Cube Solver Robot with Arduino]] [KIT_CUBE_ROBOT][108301026]

== Virtual Reality (VR)==
*[http://store.linksprite.com/diy-virtual-reality-3d-glasses-cardboard-box-nfc-for-google-card/ DIY Virtual Reality 3D Glasses Cardboard Box NFC for Google Card ] [VR_CARDBOX] [209201005]

== FPGA ==

=== O-board ===
*[[O-board]] [MP_OBOARD][120201024]

=== ONetSwitch ===

*[[ONetSwitch30]][MP_ONetSwitch30][102201020]
*[[ONetSwitch45]][MP_ONetSwitch45][102201021]

== Accessories ==
*[[Power Adapter]] [POW_ADAP_DN1] [126201004]
*[[Alligator Clip]] [TOL_TSTCLIP] [125201001]
*[[Heat Shrink Tube (Black)]] [TOL_HTTUBE][125201002]
*[[ASSEMBLED J-HEAD HOTEND NOZZLE FOR FILAMENT REPRAP MAKERBOT KOSSEL DELTA: PTFE 3MM/NOZZLE 0.3MM]][3D_HOTEND_0.3]
*[[ASSEMBLED J-HEAD HOTEND NOZZLE FOR FILAMENT REPRAP MAKERBOT KOSSEL DELTA: PTFE 1.75MM/NOZZLE 0.5MM]][3D_HOTEND_0.5]
*[[RAMPS 1.4 RepRapp Arduino Mega Pololu Shield For 3D printer Rep]][SHD_RAMPS1P4][101201006]
*[[3D Printer Filament Tray Rack]][3D_PRINTER_RACK][138201001]
*[[PLA ABS HIPS 1.75mm 3.0mm 3D Printer Filament 1kg/2.2lb for 3D Printers (White)]][3D_PRINTER_FILAMENT][138201002]
*[[DC Barrel Adapter Female 5.5x2.1mm to male 4.0x1.7mm]] [DC_ADFTM][139201001]
*[[USB Silicone Soft Keyboard]] [USB_KEYBOARD]
*[[Optical Fingerprint Module for pcDuino/Arduino]][FM206][115401002]

24GHz Milimeter Wave Radar Breakout Board for Multi Human Detection

2020-12-07T07:49:20Z

Alvin: /* Resources */

== Introduction ==

This is a K-band millimeter wave radar sensor system, which adopts FMCW modulation mode with high complexity. It can detect up 3 persons' location and speed within 5 meters.

It can detect the range and speed of stationary human body and corresponding moving target, and has high ranging and velocity accuracy. The antenna with one transmitter and one receiver is adopted, and the radar transceiver link has high isolation; the RF MMIC and antenna are coplanar, which can reduce the RF link loss. Taylor algorithm is used to synthesize the antenna pattern with low sidelobe. The sidelobe suppression ratio is better than - 15dB, which makes it not easy to be interfered by ground moving targets, and can improve the detection performance of radar.

Radar works by sending a beam of electromagnetic radiation waves from the transmitter (TX Antenna) and receiving them through the receiver (RX Antenna) and measuring amplitude and position of an object’s movement. After analysis by a special algorithm, the human body's breathing, movement, number of people, distance, direction, and other information can be obtained.

[[File:radar-2.jpg|500px]]

[[Image:radar-3.jpg|500px]]

[[Image:radar-13.jpg|500px]]

== Features ==

● Detection of the human body's breathing, movement, number of people, distance, direction, etc.. It can detect multiple people at the same time

● Compact size for easy deployment

● 24GHz transceiver IC for high-precision measurements of movement and speed

● TTL UART Interface

● Low power consumption for prolonged usage

● Maintains operation through harsh environments (temperature, humidity, noise, airflow, dust, light, etc)

● Low power output (no excessive radiation) and therefore no harm to the human body

● Operating Temp. : -40℃~+85℃

● SIZE: 44x49.8 Unit: mm Plate thickness: 1.6 mm

== Applications ==

● Building and smart home (IoT)(TV, projection, speakers,air conditioning, lighting etc.)

● Hotel and Guest House Management

● Management of office personnel

● Intrusion Detection Systems

● Automatic door, elevator

● Smart street lights, etc.

== Product Identification ==

[[Image:radar-12.jpg|500px]]

(1)Honmax

(2)Radar

(3)(4) PartNo: 17

== Shape and Dimensions ==

SIZE: 44x49.8 Unit: mm
Plate thickness: 1.6 mm

[[Image:radar-1.png|500px]]

Block Diagram:

[[Image:radar-4.jpg|500px]]

== Electrical Characteristics ==

[[Image:radar-5.jpg|500px]]

[[Image:radar-6.jpg|500px]]

FOV:

[[Image:radar-7.jpg|500px]]

[[Image:radar-8.jpg|500px]]

[[Image:radar-9.jpg|500px]]

PIN INTERFACE

[[Image:radar-10.jpg|500px]]

[[Image:radar-14.jpg|500px]]

== Environmental Characteristics ==
(1)Storage Condition:
The temperature should be within 0 ~ 30℃ and humidity should be less than 60% RH. The product should be used within 1 year from the time of delivery.

(2)Operating Temperature Range
Operating temperature range : -40℃ to +85℃.

== Resources ==
[https://aishop-linksprite.s3-us-west-1.amazonaws.com/radar+module/Radar+multitarget+serial+communication+protocol+v1.4.pdf Radar multitarget serial communication protocol v1.4 ]

[https://aishop-linksprite.s3-us-west-1.amazonaws.com/radar+module/RadarL17Demo_V1.1.0.zip Installation package ]

24GHz Milimeter Wave Radar Breakout Board for Multi Human Detection

2020-12-01T03:28:48Z

Alvin: /* Introduction */

== Introduction ==

This is a K-band millimeter wave radar sensor system, which adopts FMCW modulation mode with high complexity. It can detect up 3 persons' location and speed within 5 meters.

It can detect the range and speed of stationary human body and corresponding moving target, and has high ranging and velocity accuracy. The antenna with one transmitter and one receiver is adopted, and the radar transceiver link has high isolation; the RF MMIC and antenna are coplanar, which can reduce the RF link loss. Taylor algorithm is used to synthesize the antenna pattern with low sidelobe. The sidelobe suppression ratio is better than - 15dB, which makes it not easy to be interfered by ground moving targets, and can improve the detection performance of radar.

Radar works by sending a beam of electromagnetic radiation waves from the transmitter (TX Antenna) and receiving them through the receiver (RX Antenna) and measuring amplitude and position of an object’s movement. After analysis by a special algorithm, the human body's breathing, movement, number of people, distance, direction, and other information can be obtained.

[[File:radar-2.jpg|500px]]

[[Image:radar-3.jpg|500px]]

[[Image:radar-13.jpg|500px]]

== Features ==

● Detection of the human body's breathing, movement, number of people, distance, direction, etc.. It can detect multiple people at the same time

● Compact size for easy deployment

● 24GHz transceiver IC for high-precision measurements of movement and speed

● TTL UART Interface

● Low power consumption for prolonged usage

● Maintains operation through harsh environments (temperature, humidity, noise, airflow, dust, light, etc)

● Low power output (no excessive radiation) and therefore no harm to the human body

● Operating Temp. : -40℃~+85℃

● SIZE: 44x49.8 Unit: mm Plate thickness: 1.6 mm

== Applications ==

● Building and smart home (IoT)(TV, projection, speakers,air conditioning, lighting etc.)

● Hotel and Guest House Management

● Management of office personnel

● Intrusion Detection Systems

● Automatic door, elevator

● Smart street lights, etc.

== Product Identification ==

[[Image:radar-12.jpg|500px]]

(1)Honmax

(2)Radar

(3)(4) PartNo: 17

== Shape and Dimensions ==

SIZE: 44x49.8 Unit: mm
Plate thickness: 1.6 mm

[[Image:radar-1.png|500px]]

Block Diagram:

[[Image:radar-4.jpg|500px]]

== Electrical Characteristics ==

[[Image:radar-5.jpg|500px]]

[[Image:radar-6.jpg|500px]]

FOV:

[[Image:radar-7.jpg|500px]]

[[Image:radar-8.jpg|500px]]

[[Image:radar-9.jpg|500px]]

PIN INTERFACE

[[Image:radar-10.jpg|500px]]

[[Image:radar-14.jpg|500px]]

== Environmental Characteristics ==
(1)Storage Condition:
The temperature should be within 0 ~ 30℃ and humidity should be less than 60% RH. The product should be used within 1 year from the time of delivery.

(2)Operating Temperature Range
Operating temperature range : -40℃ to +85℃.

== Resources ==
[https://aishop-linksprite.s3-us-west-1.amazonaws.com/radar+module/Multi+Target+Serial+Communication+Protocol+v1.4+for+TCL+Radar.pdf Radar multitarget serial communication protocol v1.4 ]

[https://aishop-linksprite.s3-us-west-1.amazonaws.com/radar+module/RadarL17Demo_V1.1.0.zip Installation package ]

24GHz Milimeter Wave Radar Breakout Board for Multi Human Detection

2020-12-01T03:13:13Z

Alvin: /* Applications */

== Introduction ==

This is a K-band millimeter wave radar sensor system, which adopts FMCW modulation mode with high complexity. It can detect up 3 persons' location and speed within 5 meters.

It can detect the range and speed of stationary human body and corresponding moving target, and has high ranging and velocity accuracy. The antenna with one transmitter and one receiver is adopted, and the radar transceiver link has high isolation; the RF MMIC and antenna are coplanar, which can reduce the RF link loss. Taylor algorithm is used to synthesize the antenna pattern with low sidelobe. The sidelobe suppression ratio is better than - 15dB, which makes it not easy to be interfered by ground moving targets, and can improve the detection performance of radar.

[[File:radar-2.jpg|500px]]

[[Image:radar-3.jpg|500px]]

[[Image:radar-13.jpg|500px]]

== Features ==

● Detection of the human body's breathing, movement, number of people, distance, direction, etc.. It can detect multiple people at the same time

● Compact size for easy deployment

● 24GHz transceiver IC for high-precision measurements of movement and speed

● TTL UART Interface

● Low power consumption for prolonged usage

● Maintains operation through harsh environments (temperature, humidity, noise, airflow, dust, light, etc)

● Low power output (no excessive radiation) and therefore no harm to the human body

● Operating Temp. : -40℃~+85℃

● SIZE: 44x49.8 Unit: mm Plate thickness: 1.6 mm

== Applications ==

● Building and smart home (IoT)(TV, projection, speakers,air conditioning, lighting etc.)

● Hotel and Guest House Management

● Management of office personnel

● Intrusion Detection Systems

● Automatic door, elevator

● Smart street lights, etc.

== Product Identification ==

[[Image:radar-12.jpg|500px]]

(1)Honmax

(2)Radar

(3)(4) PartNo: 17

== Shape and Dimensions ==

SIZE: 44x49.8 Unit: mm
Plate thickness: 1.6 mm

[[Image:radar-1.png|500px]]

Block Diagram:

[[Image:radar-4.jpg|500px]]

== Electrical Characteristics ==

[[Image:radar-5.jpg|500px]]

[[Image:radar-6.jpg|500px]]

FOV:

[[Image:radar-7.jpg|500px]]

[[Image:radar-8.jpg|500px]]

[[Image:radar-9.jpg|500px]]

PIN INTERFACE

[[Image:radar-10.jpg|500px]]

[[Image:radar-14.jpg|500px]]

== Environmental Characteristics ==
(1)Storage Condition:
The temperature should be within 0 ~ 30℃ and humidity should be less than 60% RH. The product should be used within 1 year from the time of delivery.

(2)Operating Temperature Range
Operating temperature range : -40℃ to +85℃.

== Resources ==
[https://aishop-linksprite.s3-us-west-1.amazonaws.com/radar+module/Multi+Target+Serial+Communication+Protocol+v1.4+for+TCL+Radar.pdf Radar multitarget serial communication protocol v1.4 ]

[https://aishop-linksprite.s3-us-west-1.amazonaws.com/radar+module/RadarL17Demo_V1.1.0.zip Installation package ]

24GHz Milimeter Wave Radar Breakout Board for Multi Human Detection

2020-12-01T03:01:49Z

Alvin: /* Features */

== Introduction ==

This is a K-band millimeter wave radar sensor system, which adopts FMCW modulation mode with high complexity. It can detect up 3 persons' location and speed within 5 meters.

It can detect the range and speed of stationary human body and corresponding moving target, and has high ranging and velocity accuracy. The antenna with one transmitter and one receiver is adopted, and the radar transceiver link has high isolation; the RF MMIC and antenna are coplanar, which can reduce the RF link loss. Taylor algorithm is used to synthesize the antenna pattern with low sidelobe. The sidelobe suppression ratio is better than - 15dB, which makes it not easy to be interfered by ground moving targets, and can improve the detection performance of radar.

[[File:radar-2.jpg|500px]]

[[Image:radar-3.jpg|500px]]

[[Image:radar-13.jpg|500px]]

== Features ==

● Detection of the human body's breathing, movement, number of people, distance, direction, etc.. It can detect multiple people at the same time

● Compact size for easy deployment

● 24GHz transceiver IC for high-precision measurements of movement and speed

● TTL UART Interface

● Low power consumption for prolonged usage

● Maintains operation through harsh environments (temperature, humidity, noise, airflow, dust, light, etc)

● Low power output (no excessive radiation) and therefore no harm to the human body

● Operating Temp. : -40℃~+85℃

● SIZE: 44x49.8 Unit: mm Plate thickness: 1.6 mm

== Applications ==

● Building and smart home (IoT)

● Lighting control

● Air conditioning

● Industrial robotics (Manufacturing robotics)

== Product Identification ==

[[Image:radar-12.jpg|500px]]

(1)Honmax

(2)Radar

(3)(4) PartNo: 17

== Shape and Dimensions ==

SIZE: 44x49.8 Unit: mm
Plate thickness: 1.6 mm

[[Image:radar-1.png|500px]]

Block Diagram:

[[Image:radar-4.jpg|500px]]

== Electrical Characteristics ==

[[Image:radar-5.jpg|500px]]

[[Image:radar-6.jpg|500px]]

FOV:

[[Image:radar-7.jpg|500px]]

[[Image:radar-8.jpg|500px]]

[[Image:radar-9.jpg|500px]]

PIN INTERFACE

[[Image:radar-10.jpg|500px]]

[[Image:radar-14.jpg|500px]]

== Environmental Characteristics ==
(1)Storage Condition:
The temperature should be within 0 ~ 30℃ and humidity should be less than 60% RH. The product should be used within 1 year from the time of delivery.

(2)Operating Temperature Range
Operating temperature range : -40℃ to +85℃.

== Resources ==
[https://aishop-linksprite.s3-us-west-1.amazonaws.com/radar+module/Multi+Target+Serial+Communication+Protocol+v1.4+for+TCL+Radar.pdf Radar multitarget serial communication protocol v1.4 ]

[https://aishop-linksprite.s3-us-west-1.amazonaws.com/radar+module/RadarL17Demo_V1.1.0.zip Installation package ]

24GHz Milimeter Wave Radar Breakout Board for Multi Human Detection

2020-11-30T02:47:00Z

Alvin: /* Resources */

== Introduction ==

This is a K-band millimeter wave radar sensor system, which adopts FMCW modulation mode with high complexity. It can detect up 3 persons' location and speed within 5 meters.

It can detect the range and speed of stationary human body and corresponding moving target, and has high ranging and velocity accuracy. The antenna with one transmitter and one receiver is adopted, and the radar transceiver link has high isolation; the RF MMIC and antenna are coplanar, which can reduce the RF link loss. Taylor algorithm is used to synthesize the antenna pattern with low sidelobe. The sidelobe suppression ratio is better than - 15dB, which makes it not easy to be interfered by ground moving targets, and can improve the detection performance of radar.

[[File:radar-2.jpg|500px]]

[[Image:radar-3.jpg|500px]]

[[Image:radar-13.jpg|500px]]

== Features ==

● Light weight, compact

● 24GHZ-ISM,

● TTL UART Interface

● Easy mounting

● Operating Temp. : -40℃~+85℃

● SIZE: 44x49.8 Unit: mm Plate thickness: 1.6 mm

== Applications ==

● Building and smart home (IoT)

● Lighting control

● Air conditioning

● Industrial robotics (Manufacturing robotics)

== Product Identification ==

[[Image:radar-12.jpg|500px]]

(1)Honmax

(2)Radar

(3)(4) PartNo: 17

== Shape and Dimensions ==

SIZE: 44x49.8 Unit: mm
Plate thickness: 1.6 mm

[[Image:radar-1.png|500px]]

Block Diagram:

[[Image:radar-4.jpg|500px]]

== Electrical Characteristics ==

[[Image:radar-5.jpg|500px]]

[[Image:radar-6.jpg|500px]]

FOV:

[[Image:radar-7.jpg|500px]]

[[Image:radar-8.jpg|500px]]

[[Image:radar-9.jpg|500px]]

PIN INTERFACE

[[Image:radar-10.jpg|500px]]

[[Image:radar-14.jpg|500px]]

== Environmental Characteristics ==
(1)Storage Condition:
The temperature should be within 0 ~ 30℃ and humidity should be less than 60% RH. The product should be used within 1 year from the time of delivery.

(2)Operating Temperature Range
Operating temperature range : -40℃ to +85℃.

== Resources ==
[https://aishop-linksprite.s3-us-west-1.amazonaws.com/radar+module/Multi+Target+Serial+Communication+Protocol+v1.4+for+TCL+Radar.pdf Radar multitarget serial communication protocol v1.4 ]

[https://aishop-linksprite.s3-us-west-1.amazonaws.com/radar+module/RadarL17Demo_V1.1.0.zip Installation package ]

24GHz Milimeter Wave Radar Breakout Board for Multi Human Detection

2020-11-23T08:05:58Z

Alvin: /* Introduction */

File:Radar-14.jpg

2020-11-23T08:05:07Z

Alvin:

File:Radar-13.jpg

2020-11-23T08:04:55Z

Alvin:

24GHz Milimeter Wave Radar Breakout Board for Multi Human Detection

2020-11-23T08:04:41Z

Alvin: /* Introduction */

24GHz Milimeter Wave Radar Breakout Board for Multi Human Detection

2020-11-23T08:04:06Z

Alvin: /* Electrical Characteristics */

24GHz Milimeter Wave Radar Breakout Board for Multi Human Detection

2020-11-23T06:49:19Z

Alvin: /* Features */

24GHz Milimeter Wave Radar Breakout Board for Multi Human Detection

2020-11-23T06:47:53Z

Alvin: /* Introduction */

24GHz Milimeter Wave Radar Breakout Board for Multi Human Detection

2020-11-23T06:07:10Z

Alvin: Created page with "== Introduction == HLR17 is a K-band millimeter wave radar sensor system, which adopts FMCW modulation mode with high complexity. It can detect the range and speed of statio..."

== Introduction ==

HLR17 is a K-band millimeter wave radar sensor system, which adopts FMCW modulation mode with high complexity. It can detect the range and speed of stationary human body and corresponding moving target, and has high ranging and velocity accuracy. The antenna with one transmitter and one receiver is adopted, and the radar transceiver link has high isolation; the RF MMIC and antenna are coplanar, which can reduce the RF link loss. Taylor algorithm is used to synthesize the antenna pattern with low sidelobe. The sidelobe suppression ratio is better than - 15dB, which makes hlp12 not easy to be interfered by ground moving targets, and can improve the detection performance of radar.

[[File:radar-2.jpg|500px]]

[[Image:radar-3.jpg|500px]]

== Features ==

● Light weight, compact

● 24GHZ-ISM,

● Low cost

● Hidden mounting capability

● Operating Temp. : -40℃~+85℃

● Maintains operation through harsh weather conditions (temperature, light, rain)

== Applications ==

● Building and smart home (IoT)

● Lighting control

● Air conditioning

● Industrial robotics (Manufacturing robotics)

== Product Identification ==

[[Image:radar-12.jpg|500px]]

(1)Honmax

(2)Radar

(3)(4) PartNo: 17

== Shape and Dimensions ==

SIZE: 44x49.8 Unit: mm
Plate thickness: 1.6 mm

[[Image:radar-1.png|500px]]

Block Diagram:

[[Image:radar-4.jpg|500px]]

== Electrical Characteristics ==

[[Image:radar-5.jpg|500px]]

[[Image:radar-6.jpg|500px]]

FOV:

[[Image:radar-7.jpg|500px]]

[[Image:radar-8.jpg|500px]]

[[Image:radar-9.jpg|500px]]

PIN INTERFACE

[[Image:radar-10.jpg|500px]]

[[Image:radar-11.jpg|500px]]

== Environmental Characteristics ==
(1)Storage Condition:
The temperature should be within 0 ~ 30℃ and humidity should be less than 60% RH. The product should be used within 1 year from the time of delivery.

(2)Operating Temperature Range
Operating temperature range : -40℃ to +85℃.

== Resources ==
[https://aishop-linksprite.s3-us-west-1.amazonaws.com/radar+module/Multi+Target+Serial+Communication+Protocol+v1.4+for+TCL+Radar.pdf Radar multitarget serial communication protocol v1.4 ]

Ai

2020-11-23T06:06:11Z

Alvin: /* Radar Module */

== Facial Capture AI Smart Camera ==

*[[2MP Network IP Camera with Facial Recognition For Payment Verification on POS Device]]
*[[PercepCam POE Mini Dome Gun Detection Camera Surveillance camera]] [DC-DO2ZD3600-G]
*[[2MP Network IP Camera with Facial Recognition For Payment Verification on POS Device]]
*[[Head Counting Camera Smart Person Flow Statistics System]] []

== Access Control Tablet ==

*[[(Binocular Camera Version) 7.0”Flat Plate Facial Recognition Tablet]] [AI-7020S][]
*[[7.0”Flat Plate Facial Recognition Terminal for the Speed Gate]] [AI-7020P][]
*[[7.0”Access Gate Facial Recognition Terminal]] [AI-7020C][]
*[[Visitor Welcome System Based on Face Recognition]] [AI-WELC-SYS][]
*[[pcDuino9s: Industry Grade RK3288 Single Board Computer with Linux or Android with Metal Enclosure]] [MP_RK3288_ENC][]
*[[2MP Fish Eye Shelf Camera With JPEG Output for Smart Shelf Application]] [CAM-FISH-OBJECT][]
*[[RGB/Infrared USB Cameras for Face Recogniton With Antispoof]] [CAM-JX008][]
*[[AI accelarator Intel Movidus Neural Computation Module G38 MA2155]] [MOD-G38-MA2155][]
*[[AI accelarator Intel Movidus Neural Computation Module G38 MA2450]] [MOD-G38-MA2450][]
*[[All Weather Fixture With Adjustable Bracket for Security Camera]] [PART-CAM-BRACHET][]
*[[Hardware Kit for Off-line Store/Shopping mall Operational Management Solution Based on Face Recognition]] [KIT-AISHOP][]
*[[pcDuino9 mini embedded AI image processing module]] [MOD-AI-RK3288][]
*[[pcDuino9 AI visual edge computing development kit]] [KIT-AI-RK3288][]
*[[pcDuino9 AI visual edge computing development kit（Dome Camera 0722）]] [KIT-AI-RK3288-DOME-0722][]
*[[pcDuino9 AI visual edge computing development kit（Dome Camera 2812）]] [KIT-AI-RK3288-DOME-2812][]

*[[Intelligent Face Capture Box IBOX-C0001]] [BOX-IBOX-C0001][]
*[[YWA-TK series infrared reflective passenger flow counter]] [COUN-YWA-TK][]
*[[Networked 3D person counter]] [COUN-3D][]
*[[Infrared WIFI Passenger Flow Counter]][COUN-WIFI][]
*[[IP coaxial network transmitter IP HD network signals to coaxial cable/twisted-pair wire ]][][]
*[[1.1m upright column bracket Face Recognition Access Control Tablet Bracket ]][][]
*[[0.55m upright column bracket Face Recognition Access Control Tablet Bracket ]][][]
*[[Triangular Bracket Base of Face Recognition Access Control Tablet]][][]

== Intelligent products for pets ==

*[[Intelligent Laser Pet Companion Camera]] []
*[[Smart Pet Feeder (with Video) Remote Timing Feeding]] []

== Radar Module ==
*[[24GHz Milimeter Wave Radar Breakout Board for Multi Human Detection]] []

24GHz millimeter wave radar module, speed and distance measurement, human presence detection, water flow detection, gesture recognition

2020-11-20T07:17:56Z

== Introduction ==

HLR17 is a K-band millimeter wave radar sensor system, which adopts FMCW modulation mode with high complexity. It can detect the range and speed of stationary human body and corresponding moving target, and has high ranging and velocity accuracy. The antenna with one transmitter and one receiver is adopted, and the radar transceiver link has high isolation; the RF MMIC and antenna are coplanar, which can reduce the RF link loss. Taylor algorithm is used to synthesize the antenna pattern with low sidelobe. The sidelobe suppression ratio is better than - 15dB, which makes hlp12 not easy to be interfered by ground moving targets, and can improve the detection performance of radar.

[[File:radar-2.jpg|500px]]

[[Image:radar-3.jpg|500px]]

== Features ==

● Light weight, compact

● 24GHZ-ISM,

● Low cost

● Hidden mounting capability

● Operating Temp. : -40℃~+85℃

● Maintains operation through harsh weather conditions (temperature, light, rain)

== Applications ==

● Building and smart home (IoT)

● Lighting control

● Air conditioning

● Industrial robotics (Manufacturing robotics)

== Product Identification ==

[[Image:radar-12.jpg|500px]]

(1)Honmax

(2)Radar

(3)(4) PartNo: 17

== Shape and Dimensions ==

SIZE: 44x49.8 Unit: mm
Plate thickness: 1.6 mm

[[Image:radar-1.png|500px]]

Block Diagram:

[[Image:radar-4.jpg|500px]]

== Electrical Characteristics ==

[[Image:radar-5.jpg|500px]]

[[Image:radar-6.jpg|500px]]

FOV:

[[Image:radar-7.jpg|500px]]

[[Image:radar-8.jpg|500px]]

[[Image:radar-9.jpg|500px]]

PIN INTERFACE

[[Image:radar-10.jpg|500px]]

[[Image:radar-11.jpg|500px]]

== Environmental Characteristics ==
(1)Storage Condition:
The temperature should be within 0 ~ 30℃ and humidity should be less than 60% RH. The product should be used within 1 year from the time of delivery.

(2)Operating Temperature Range
Operating temperature range : -40℃ to +85℃.

== Resources ==
[https://aishop-linksprite.s3-us-west-1.amazonaws.com/radar+module/Multi+Target+Serial+Communication+Protocol+v1.4+for+TCL+Radar.pdf Multi Target Serial Communication Protocol v1.4 for TCL Radar ]

Ai

2020-11-20T07:17:37Z

Alvin: /* Radar Module */

== Facial Capture AI Smart Camera ==

*[[2MP Network IP Camera with Facial Recognition For Payment Verification on POS Device]]
*[[PercepCam POE Mini Dome Gun Detection Camera Surveillance camera]] [DC-DO2ZD3600-G]
*[[2MP Network IP Camera with Facial Recognition For Payment Verification on POS Device]]
*[[Head Counting Camera Smart Person Flow Statistics System]] []

== Access Control Tablet ==

*[[(Binocular Camera Version) 7.0”Flat Plate Facial Recognition Tablet]] [AI-7020S][]
*[[7.0”Flat Plate Facial Recognition Terminal for the Speed Gate]] [AI-7020P][]
*[[7.0”Access Gate Facial Recognition Terminal]] [AI-7020C][]
*[[Visitor Welcome System Based on Face Recognition]] [AI-WELC-SYS][]
*[[pcDuino9s: Industry Grade RK3288 Single Board Computer with Linux or Android with Metal Enclosure]] [MP_RK3288_ENC][]
*[[2MP Fish Eye Shelf Camera With JPEG Output for Smart Shelf Application]] [CAM-FISH-OBJECT][]
*[[RGB/Infrared USB Cameras for Face Recogniton With Antispoof]] [CAM-JX008][]
*[[AI accelarator Intel Movidus Neural Computation Module G38 MA2155]] [MOD-G38-MA2155][]
*[[AI accelarator Intel Movidus Neural Computation Module G38 MA2450]] [MOD-G38-MA2450][]
*[[All Weather Fixture With Adjustable Bracket for Security Camera]] [PART-CAM-BRACHET][]
*[[Hardware Kit for Off-line Store/Shopping mall Operational Management Solution Based on Face Recognition]] [KIT-AISHOP][]
*[[pcDuino9 mini embedded AI image processing module]] [MOD-AI-RK3288][]
*[[pcDuino9 AI visual edge computing development kit]] [KIT-AI-RK3288][]
*[[pcDuino9 AI visual edge computing development kit（Dome Camera 0722）]] [KIT-AI-RK3288-DOME-0722][]
*[[pcDuino9 AI visual edge computing development kit（Dome Camera 2812）]] [KIT-AI-RK3288-DOME-2812][]

*[[Intelligent Face Capture Box IBOX-C0001]] [BOX-IBOX-C0001][]
*[[YWA-TK series infrared reflective passenger flow counter]] [COUN-YWA-TK][]
*[[Networked 3D person counter]] [COUN-3D][]
*[[Infrared WIFI Passenger Flow Counter]][COUN-WIFI][]
*[[IP coaxial network transmitter IP HD network signals to coaxial cable/twisted-pair wire ]][][]
*[[1.1m upright column bracket Face Recognition Access Control Tablet Bracket ]][][]
*[[0.55m upright column bracket Face Recognition Access Control Tablet Bracket ]][][]
*[[Triangular Bracket Base of Face Recognition Access Control Tablet]][][]

== Intelligent products for pets ==

*[[Intelligent Laser Pet Companion Camera]] []
*[[Smart Pet Feeder (with Video) Remote Timing Feeding]] []

== Radar Module ==
*[[24GHz millimeter wave radar module, speed and distance measurement, human presence detection, water flow detection, gesture recognition]] []

24G millimeter wave radar module, speed and distance measurement, human presence detection, water flow detection, gesture recognition

2020-11-20T07:03:21Z

== Introduction ==

HLR17 is a K-band millimeter wave radar sensor system, which adopts FMCW modulation mode with high complexity. It can detect the range and speed of stationary human body and corresponding moving target, and has high ranging and velocity accuracy. The antenna with one transmitter and one receiver is adopted, and the radar transceiver link has high isolation; the RF MMIC and antenna are coplanar, which can reduce the RF link loss. Taylor algorithm is used to synthesize the antenna pattern with low sidelobe. The sidelobe suppression ratio is better than - 15dB, which makes hlp12 not easy to be interfered by ground moving targets, and can improve the detection performance of radar.

[[File:radar-2.jpg|500px]]

[[Image:radar-3.jpg|500px]]

== Features ==

● Light weight, compact

● 24GHZ-ISM,

● Low cost

● Hidden mounting capability

● Operating Temp. : -40℃~+85℃

● Maintains operation through harsh weather conditions (temperature, light, rain)

== Applications ==

● Building and smart home (IoT)

● Lighting control

● Air conditioning

● Industrial robotics (Manufacturing robotics)

== Product Identification ==

[[Image:radar-12.jpg|500px]]

(1)Honmax

(2)Radar

(3)(4) PartNo: 17

== Shape and Dimensions ==

SIZE: 44x49.8 Unit: mm
Plate thickness: 1.6 mm

[[Image:radar-1.png|500px]]

Block Diagram:

[[Image:radar-4.jpg|500px]]

== Electrical Characteristics ==

[[Image:radar-5.jpg|500px]]

[[Image:radar-6.jpg|500px]]

FOV:

[[Image:radar-7.jpg|500px]]

[[Image:radar-8.jpg|500px]]

[[Image:radar-9.jpg|500px]]

PIN INTERFACE

[[Image:radar-10.jpg|500px]]

[[Image:radar-11.jpg|500px]]

== Environmental Characteristics ==
(1)Storage Condition:
The temperature should be within 0 ~ 30℃ and humidity should be less than 60% RH. The product should be used within 1 year from the time of delivery.

(2)Operating Temperature Range
Operating temperature range : -40℃ to +85℃.

== Resources ==
[https://aishop-linksprite.s3-us-west-1.amazonaws.com/radar+module/Multi+Target+Serial+Communication+Protocol+v1.4+for+TCL+Radar.pdf Multi Target Serial Communication Protocol v1.4 for TCL Radar ]

Ai

2020-11-20T07:03:05Z

Alvin: /* Radar Module */

== Facial Capture AI Smart Camera ==

*[[2MP Network IP Camera with Facial Recognition For Payment Verification on POS Device]]
*[[PercepCam POE Mini Dome Gun Detection Camera Surveillance camera]] [DC-DO2ZD3600-G]
*[[2MP Network IP Camera with Facial Recognition For Payment Verification on POS Device]]
*[[Head Counting Camera Smart Person Flow Statistics System]] []

== Access Control Tablet ==

*[[(Binocular Camera Version) 7.0”Flat Plate Facial Recognition Tablet]] [AI-7020S][]
*[[7.0”Flat Plate Facial Recognition Terminal for the Speed Gate]] [AI-7020P][]
*[[7.0”Access Gate Facial Recognition Terminal]] [AI-7020C][]
*[[Visitor Welcome System Based on Face Recognition]] [AI-WELC-SYS][]
*[[pcDuino9s: Industry Grade RK3288 Single Board Computer with Linux or Android with Metal Enclosure]] [MP_RK3288_ENC][]
*[[2MP Fish Eye Shelf Camera With JPEG Output for Smart Shelf Application]] [CAM-FISH-OBJECT][]
*[[RGB/Infrared USB Cameras for Face Recogniton With Antispoof]] [CAM-JX008][]
*[[AI accelarator Intel Movidus Neural Computation Module G38 MA2155]] [MOD-G38-MA2155][]
*[[AI accelarator Intel Movidus Neural Computation Module G38 MA2450]] [MOD-G38-MA2450][]
*[[All Weather Fixture With Adjustable Bracket for Security Camera]] [PART-CAM-BRACHET][]
*[[Hardware Kit for Off-line Store/Shopping mall Operational Management Solution Based on Face Recognition]] [KIT-AISHOP][]
*[[pcDuino9 mini embedded AI image processing module]] [MOD-AI-RK3288][]
*[[pcDuino9 AI visual edge computing development kit]] [KIT-AI-RK3288][]
*[[pcDuino9 AI visual edge computing development kit（Dome Camera 0722）]] [KIT-AI-RK3288-DOME-0722][]
*[[pcDuino9 AI visual edge computing development kit（Dome Camera 2812）]] [KIT-AI-RK3288-DOME-2812][]

*[[Intelligent Face Capture Box IBOX-C0001]] [BOX-IBOX-C0001][]
*[[YWA-TK series infrared reflective passenger flow counter]] [COUN-YWA-TK][]
*[[Networked 3D person counter]] [COUN-3D][]
*[[Infrared WIFI Passenger Flow Counter]][COUN-WIFI][]
*[[IP coaxial network transmitter IP HD network signals to coaxial cable/twisted-pair wire ]][][]
*[[1.1m upright column bracket Face Recognition Access Control Tablet Bracket ]][][]
*[[0.55m upright column bracket Face Recognition Access Control Tablet Bracket ]][][]
*[[Triangular Bracket Base of Face Recognition Access Control Tablet]][][]

== Intelligent products for pets ==

*[[Intelligent Laser Pet Companion Camera]] []
*[[Smart Pet Feeder (with Video) Remote Timing Feeding]] []

== Radar Module ==
*[[24G millimeter wave radar module, speed and distance measurement, human presence detection, water flow detection, gesture recognition]] []

24g millimeter wave radar module, speed and distance measurement, human presence detection, water flow detection, gesture recognition

2020-11-20T05:37:57Z

Alvin:

== Introduction ==

HLR17 is a K-band millimeter wave radar sensor system, which adopts FMCW modulation mode with high complexity. It can detect the range and speed of stationary human body and corresponding moving target, and has high ranging and velocity accuracy. The antenna with one transmitter and one receiver is adopted, and the radar transceiver link has high isolation; the RF MMIC and antenna are coplanar, which can reduce the RF link loss. Taylor algorithm is used to synthesize the antenna pattern with low sidelobe. The sidelobe suppression ratio is better than - 15dB, which makes hlp12 not easy to be interfered by ground moving targets, and can improve the detection performance of radar.

[[File:radar-2.jpg|500px]]

[[Image:radar-3.jpg|500px]]

== Features ==

● Light weight, compact

● 24GHZ-ISM,

● Low cost

● Hidden mounting capability

● Operating Temp. : -40℃~+85℃

● Maintains operation through harsh weather conditions (temperature, light, rain)

== Applications ==

● Building and smart home (IoT)

● Lighting control

● Air conditioning

● Industrial robotics (Manufacturing robotics)

== Product Identification ==

[[Image:radar-12.jpg|500px]]

(1)Honmax

(2)Radar

(3)(4) PartNo: 17

== Shape and Dimensions ==

SIZE: 44x49.8 Unit: mm
Plate thickness: 1.6 mm

[[Image:radar-1.png|500px]]

Block Diagram:

[[Image:radar-4.jpg|500px]]

== Electrical Characteristics ==

[[Image:radar-5.jpg|500px]]

[[Image:radar-6.jpg|500px]]

FOV:

[[Image:radar-7.jpg|500px]]

[[Image:radar-8.jpg|500px]]

[[Image:radar-9.jpg|500px]]

PIN INTERFACE

[[Image:radar-10.jpg|500px]]

[[Image:radar-11.jpg|500px]]

== Environmental Characteristics ==
(1)Storage Condition:
The temperature should be within 0 ~ 30℃ and humidity should be less than 60% RH. The product should be used within 1 year from the time of delivery.

(2)Operating Temperature Range
Operating temperature range : -40℃ to +85℃.

== Resources ==
[https://aishop-linksprite.s3-us-west-1.amazonaws.com/radar+module/Multi+Target+Serial+Communication+Protocol+v1.4+for+TCL+Radar.pdf Multi Target Serial Communication Protocol v1.4 for TCL Radar ]

24g millimeter wave radar module, speed and distance measurement, human presence detection, water flow detection, gesture recognition

2020-11-20T05:03:36Z

Alvin: /* Introduction */

24g millimeter wave radar module, speed and distance measurement, human presence detection, water flow detection, gesture recognition

2020-11-20T04:59:40Z

Alvin:

== Introduction ==

HLR17 is a K-band millimeter wave radar sensor system, which adopts FMCW modulation mode with high complexity. It can detect the range and speed of stationary human body and corresponding moving target, and has high ranging and velocity accuracy. The antenna with one transmitter and one receiver is adopted, and the radar transceiver link has high isolation; the RF MMIC and antenna are coplanar, which can reduce the RF link loss. Taylor algorithm is used to synthesize the antenna pattern with low sidelobe. The sidelobe suppression ratio is better than - 15dB, which makes hlp12 not easy to be interfered by ground moving targets, and can improve the detection performance of radar.

[[Image:radar02.jpg|500px]]

[[Image:radar-3.jpg|500px]]

== Features ==

● Light weight, compact

● 24GHZ-ISM,

● Low cost

● Hidden mounting capability

● Operating Temp. : -40℃~+85℃

● Maintains operation through harsh weather conditions (temperature, light, rain)

== Applications ==

● Building and smart home (IoT)

● Lighting control

● Air conditioning

● Industrial robotics (Manufacturing robotics)

== Product Identification ==

[[Image:radar-12.jpg|500px]]

(1)Honmax

(2)Radar

(3)(4) PartNo: 17

== Shape and Dimensions ==

SIZE: 44x49.8 Unit: mm
Plate thickness: 1.6 mm

[[Image:radar-1.png|500px]]

Block Diagram:

[[Image:radar-4.jpg|500px]]

== Electrical Characteristics ==

[[Image:radar-5.jpg|500px]]

[[Image:radar-6.jpg|500px]]

FOV:

[[Image:radar-7.jpg|500px]]

[[Image:radar-8.jpg|500px]]

[[Image:radar-9.jpg|500px]]

PIN INTERFACE

[[Image:radar-10.jpg|500px]]

[[Image:radar-11.jpg|500px]]

== Environmental Characteristics ==
(1)Storage Condition:
The temperature should be within 0 ~ 30℃ and humidity should be less than 60% RH. The product should be used within 1 year from the time of delivery.

(2)Operating Temperature Range
Operating temperature range : -40℃ to +85℃.

File:Radar-12.jpg

2020-11-20T04:00:37Z

Alvin:

File:Radar-11.jpg

2020-11-20T04:00:28Z

Alvin:

File:Radar-10.jpg

2020-11-20T04:00:10Z

Alvin:

File:Radar-9.jpg

2020-11-20T03:59:57Z

Alvin:

File:Radar-8.jpg

2020-11-20T03:59:48Z

Alvin:

File:Radar-7.jpg

2020-11-20T03:59:39Z

Alvin:

File:Radar-6.jpg

2020-11-20T03:59:27Z

Alvin:

File:Radar-5.jpg

2020-11-20T03:59:13Z

Alvin:

File:Radar-4.jpg

2020-11-20T03:58:53Z

Alvin:

File:Radar-3.jpg

2020-11-20T03:58:13Z

Alvin:

File:Radar-2.jpg

2020-11-20T03:57:57Z

Alvin:

File:Radar-1.png

2020-11-20T03:57:40Z

Alvin:

24g millimeter wave radar module, speed and distance measurement, human presence detection, water flow detection, gesture recognition

2020-11-20T03:56:51Z

Alvin:

== Introduction ==

HLR17 is a K-band millimeter wave radar sensor system, which adopts FMCW modulation mode with high complexity. It can detect the range and speed of stationary human body and corresponding moving target, and has high ranging and velocity accuracy. The antenna with one transmitter and one receiver is adopted, and the radar transceiver link has high isolation; the RF MMIC and antenna are coplanar, which can reduce the RF link loss. Taylor algorithm is used to synthesize the antenna pattern with low sidelobe. The sidelobe suppression ratio is better than - 15dB, which makes hlp12 not easy to be interfered by ground moving targets, and can improve the detection performance of radar.

[[Image:radar-2.jpg|500px]]

[[Image:radar-3.jpg|500px]]

== Features ==

● Light weight, compact

● 24GHZ-ISM,

● Low cost

● Hidden mounting capability

● Operating Temp. : -40℃~+85℃

● Maintains operation through harsh weather conditions (temperature, light, rain)

== Applications ==

● Building and smart home (IoT)

● Lighting control

● Air conditioning

● Industrial robotics (Manufacturing robotics)

== Product Identification ==

[[Image:radar-12.jpg|500px]]

(1)Honmax

(2)Radar

(3)(4) PartNo: 17

== Shape and Dimensions ==

SIZE: 44x49.8 Unit: mm
Plate thickness: 1.6 mm

[[Image:radar-1.png|500px]]

Block Diagram:

[[Image:radar-4.jpg|500px]]

== Electrical Characteristics ==

[[Image:radar-5.jpg|500px]]

[[Image:radar-6.jpg|500px]]

FOV:

[[Image:radar-7.jpg|500px]]

[[Image:radar-8.jpg|500px]]

[[Image:radar-9.jpg|500px]]

PIN INTERFACE

[[Image:radar-10.jpg|500px]]

[[Image:radar-11.jpg|500px]]

== Environmental Characteristics ==
(1)Storage Condition:
The temperature should be within 0 ~ 30℃ and humidity should be less than 60% RH. The product should be used within 1 year from the time of delivery.

(2)Operating Temperature Range
Operating temperature range : -40℃ to +85℃.

24g millimeter wave radar module, speed and distance measurement, human presence detection, water flow detection, gesture recognition

2020-11-20T03:55:17Z

== Introduction ==

HLR17 is a K-band millimeter wave radar sensor system, which adopts FMCW modulation mode with high complexity. It can detect the range and speed of stationary human body and corresponding moving target, and has high ranging and velocity accuracy. The antenna with one transmitter and one receiver is adopted, and the radar transceiver link has high isolation; the RF MMIC and antenna are coplanar, which can reduce the RF link loss. Taylor algorithm is used to synthesize the antenna pattern with low sidelobe. The sidelobe suppression ratio is better than - 15dB, which makes hlp12 not easy to be interfered by ground moving targets, and can improve the detection performance of radar.

[[Image:radar-2.jpg|500px]]

[[Image:radar-3.jpg|500px]]

== Features ==
● Light weight, compact
● 24GHZ-ISM,
● Low cost
● Hidden mounting capability
● Operating Temp. : -40℃~+85℃
● Maintains operation through harsh weather conditions (temperature, light, rain)

== Applications ==
● Building and smart home (IoT)
● Lighting control
● Air conditioning
● Industrial robotics (Manufacturing robotics)

== Product Identification ==
H L R 1 7
(1) (2) (3) (4)

(1)Honmax
(2)Radar
(3)(4) PartNo: 17

== Shape and Dimensions ==

SIZE: 44x49.8 Unit: mm
Plate thickness: 1.6 mm

[[Image:radar-1.png|500px]]

Block Diagram:

[[Image:radar-4.jpg|500px]]

== Electrical Characteristics ==

[[Image:radar-5.jpg|500px]]

[[Image:radar-6.jpg|500px]]

FOV:

[[Image:radar-7.jpg|500px]]

[[Image:radar-8.jpg|500px]]

[[Image:radar-9.jpg|500px]]

PIN INTERFACE

[[Image:radar-10.jpg|500px]]

[[Image:radar-11.jpg|500px]]

== Environmental Characteristics ==
(1)Storage Condition:
The temperature should be within 0 ~ 30℃ and humidity should be less than 60% RH. The product should be used within 1 year from the time of delivery.

(2)Operating Temperature Range
Operating temperature range : -40℃ to +85℃.

Ai

2020-11-20T03:31:59Z

Alvin:

== Facial Capture AI Smart Camera ==

*[[2MP Network IP Camera with Facial Recognition For Payment Verification on POS Device]]
*[[PercepCam POE Mini Dome Gun Detection Camera Surveillance camera]] [DC-DO2ZD3600-G]
*[[2MP Network IP Camera with Facial Recognition For Payment Verification on POS Device]]
*[[Head Counting Camera Smart Person Flow Statistics System]] []

== Access Control Tablet ==

*[[(Binocular Camera Version) 7.0”Flat Plate Facial Recognition Tablet]] [AI-7020S][]
*[[7.0”Flat Plate Facial Recognition Terminal for the Speed Gate]] [AI-7020P][]
*[[7.0”Access Gate Facial Recognition Terminal]] [AI-7020C][]
*[[Visitor Welcome System Based on Face Recognition]] [AI-WELC-SYS][]
*[[pcDuino9s: Industry Grade RK3288 Single Board Computer with Linux or Android with Metal Enclosure]] [MP_RK3288_ENC][]
*[[2MP Fish Eye Shelf Camera With JPEG Output for Smart Shelf Application]] [CAM-FISH-OBJECT][]
*[[RGB/Infrared USB Cameras for Face Recogniton With Antispoof]] [CAM-JX008][]
*[[AI accelarator Intel Movidus Neural Computation Module G38 MA2155]] [MOD-G38-MA2155][]
*[[AI accelarator Intel Movidus Neural Computation Module G38 MA2450]] [MOD-G38-MA2450][]
*[[All Weather Fixture With Adjustable Bracket for Security Camera]] [PART-CAM-BRACHET][]
*[[Hardware Kit for Off-line Store/Shopping mall Operational Management Solution Based on Face Recognition]] [KIT-AISHOP][]
*[[pcDuino9 mini embedded AI image processing module]] [MOD-AI-RK3288][]
*[[pcDuino9 AI visual edge computing development kit]] [KIT-AI-RK3288][]
*[[pcDuino9 AI visual edge computing development kit（Dome Camera 0722）]] [KIT-AI-RK3288-DOME-0722][]
*[[pcDuino9 AI visual edge computing development kit（Dome Camera 2812）]] [KIT-AI-RK3288-DOME-2812][]

*[[Intelligent Face Capture Box IBOX-C0001]] [BOX-IBOX-C0001][]
*[[YWA-TK series infrared reflective passenger flow counter]] [COUN-YWA-TK][]
*[[Networked 3D person counter]] [COUN-3D][]
*[[Infrared WIFI Passenger Flow Counter]][COUN-WIFI][]
*[[IP coaxial network transmitter IP HD network signals to coaxial cable/twisted-pair wire ]][][]
*[[1.1m upright column bracket Face Recognition Access Control Tablet Bracket ]][][]
*[[0.55m upright column bracket Face Recognition Access Control Tablet Bracket ]][][]
*[[Triangular Bracket Base of Face Recognition Access Control Tablet]][][]

== Intelligent products for pets ==

*[[Intelligent Laser Pet Companion Camera]] []
*[[Smart Pet Feeder (with Video) Remote Timing Feeding]] []

== Radar Module ==
*[[24g millimeter wave radar module, speed and distance measurement, human presence detection, water flow detection, gesture recognition]] []

File:COUNTCAM3.jpg

2020-08-10T06:42:41Z

Alvin:

Head Counting Camera Smart Person Flow Statistics System

2020-08-10T06:42:28Z

Alvin: /* Specifications */

== Introduction ==
Leading Edge Head Counting Algorithm With 99% Accuracy and Web / App Visual Data View

[[Image:COUNTCAM1.png|500px]]

LinkSprite releases another weapon to fight COVID-19 – the head counting camera for indoor person flow monitoring and control.

The camera uses an advanced head detection algorithm on 1080p resolution video streams. It detects heads in the picture and tracks their movement trajectory, and calculates the two-way person flow. It sends the statistics in real-time to a cloud server or a local host software for display or generating a warning message.

The system can be deployed at stores, schools, hospitals, and other places where the person flow needs to be monitored or controlled.

== Product Features ==
• Real-Time Person Flow Statistics

• Single device two-way statistics

• Flexible date range query: Query of historical person flow data by day, week, month, quarter, or year.

• Data management platform: Web / APP / local client

• Large screen dashboard display and data visualization

• Chain store management: Multiple stores can be managed in our account

• Multi-account management: Support main account and multiple sub-accounts

== Product Advantages ==
• Cutting edge head counting algorithm: The camera is embedded with accurate head detection and movement analysis algorithms. It does not count until the person leaves the camera view, effectively filtering persons wandering under the camera.

• Highly Accurate Statistics: An accuracy of 99% is achieved in typical test environment.No disturbance by person blockages

• No disturbance by person blockages

• Wide Coverage: Coverage height: 2.5-4.5 m; Large FOV camera can cover 3.9m in width

• Cloud Server: Easy management, easy expansion, remote maintenance, low cost

• Simple installation and easy to use

• Easy integration: Standard APIs for third-party further development

== Specifications ==

[[Image:COUNTCAM3.jpg]]

File:COUNTCAM2.jpg

2020-08-10T06:40:57Z

Alvin:

File:COUNTCAM1.png

2020-08-10T06:40:05Z

Alvin:

Head Counting Camera Smart Person Flow Statistics System

2020-08-10T06:39:31Z

Alvin:

Head Counting Camera Smart Person Flow Statistics System

2020-08-10T06:37:23Z

Alvin: Created page with "== Introduction == Leading Edge Head Counting Algorithm With 99% Accuracy and Web / App Visual Data View 500px LinkSprite releases another weapon to..."

== Introduction ==
Leading Edge Head Counting Algorithm With 99% Accuracy and Web / App Visual Data View

[[Image:COUNTCAM1.png|500px]]

LinkSprite releases another weapon to fight COVID-19 – the head counting camera for indoor person flow monitoring and control.

The camera uses an advanced head detection algorithm on 1080p resolution video streams. It detects heads in the picture and tracks their movement trajectory, and calculates the two-way person flow. It sends the statistics in real-time to a cloud server or a local host software for display or generating a warning message.

The system can be deployed at stores, schools, hospitals, and other places where the person flow needs to be monitored or controlled.

== Product Features ==
Real-Time Person Flow Statistics
Single device two-way statistics
Flexible date range query: Query of historical person flow data by day, week, month, quarter, or year.
Data management platform: Web / APP / local client
Large screen dashboard display and data visualization
Chain store management: Multiple stores can be managed in our account
Multi-account management: Support main account and multiple sub-accounts

== Product Advantages ==
Cutting edge head counting algorithm: The camera is embedded with accurate head detection and movement analysis algorithms. It does not count until the person leaves the camera view, effectively filtering persons wandering under the camera.
Highly Accurate Statistics: An accuracy of 99% is achieved in typical test environment.No disturbance by person blockages
No disturbance by person blockages
Wide Coverage: Coverage height: 2.5-4.5 m; Large FOV camera can cover 3.9m in width
Cloud Server: Easy management, easy expansion, remote maintenance, low cost
Simple installation and easy to use
Easy integration: Standard APIs for third-party further development
Applications

== Specifications ==

[[Image:COUNTCAM2.jpg|500px]]

Ai

2020-08-10T06:32:42Z

Alvin: /* Facial Capture AI Smart Camera */

Ai

2020-08-10T01:56:05Z

Alvin: /* Access Control Tablet */

== Facial Capture AI Smart Camera ==

*[[2MP Network IP Camera with Facial Recognition For Payment Verification on POS Device]]
*[[PercepCam POE Mini Dome Gun Detection Camera Surveillance camera]] [DC-DO2ZD3600-G]

== Access Control Tablet ==

*[[(Binocular Camera Version) 7.0”Flat Plate Facial Recognition Tablet]] [AI-7020S][]
*[[7.0”Flat Plate Facial Recognition Terminal for the Speed Gate]] [AI-7020P][]
*[[7.0”Access Gate Facial Recognition Terminal]] [AI-7020C][]
*[[Visitor Welcome System Based on Face Recognition]] [AI-WELC-SYS][]
*[[pcDuino9s: Industry Grade RK3288 Single Board Computer with Linux or Android with Metal Enclosure]] [MP_RK3288_ENC][]
*[[2MP Fish Eye Shelf Camera With JPEG Output for Smart Shelf Application]] [CAM-FISH-OBJECT][]
*[[RGB/Infrared USB Cameras for Face Recogniton With Antispoof]] [CAM-JX008][]
*[[AI accelarator Intel Movidus Neural Computation Module G38 MA2155]] [MOD-G38-MA2155][]
*[[AI accelarator Intel Movidus Neural Computation Module G38 MA2450]] [MOD-G38-MA2450][]
*[[All Weather Fixture With Adjustable Bracket for Security Camera]] [PART-CAM-BRACHET][]
*[[Hardware Kit for Off-line Store/Shopping mall Operational Management Solution Based on Face Recognition]] [KIT-AISHOP][]
*[[pcDuino9 mini embedded AI image processing module]] [MOD-AI-RK3288][]
*[[pcDuino9 AI visual edge computing development kit]] [KIT-AI-RK3288][]
*[[pcDuino9 AI visual edge computing development kit（Dome Camera 0722）]] [KIT-AI-RK3288-DOME-0722][]
*[[pcDuino9 AI visual edge computing development kit（Dome Camera 2812）]] [KIT-AI-RK3288-DOME-2812][]

*[[Intelligent Face Capture Box IBOX-C0001]] [BOX-IBOX-C0001][]
*[[YWA-TK series infrared reflective passenger flow counter]] [COUN-YWA-TK][]
*[[Networked 3D person counter]] [COUN-3D][]
*[[Infrared WIFI Passenger Flow Counter]][COUN-WIFI][]
*[[IP coaxial network transmitter IP HD network signals to coaxial cable/twisted-pair wire ]][][]
*[[1.1m upright column bracket Face Recognition Access Control Tablet Bracket ]][][]
*[[0.55m upright column bracket Face Recognition Access Control Tablet Bracket ]][][]
*[[Triangular Bracket Base of Face Recognition Access Control Tablet]][][]

== Intelligent products for pets ==

*[[Intelligent Laser Pet Companion Camera]] []
*[[Smart Pet Feeder (with Video) Remote Timing Feeding]] []

Ai

2020-08-10T01:55:49Z

Alvin:

== Facial Capture AI Smart Camera ==

*[[2MP Network IP Camera with Facial Recognition For Payment Verification on POS Device]]
*[[PercepCam POE Mini Dome Gun Detection Camera Surveillance camera]] [DC-DO2ZD3600-G]

== Access Control Tablet ==

*[[(Binocular Camera Version) 7.0”Flat Plate Facial Recognition Tablet]] [AI-7020S][]
*[[7.0”Flat Plate Facial Recognition Terminal for the Speed Gate]] [AI-7020P][]
*[[7.0”Access Gate Facial Recognition Terminal]] [AI-7020C][]
*[[Visitor Welcome System Based on Face Recognition]] [AI-WELC-SYS][]
*[[pcDuino9s: Industry Grade RK3288 Single Board Computer with Linux or Android with Metal Enclosure]] [MP_RK3288_ENC][]

*[[2MP Fish Eye Shelf Camera With JPEG Output for Smart Shelf Application]] [CAM-FISH-OBJECT][]
*[[RGB/Infrared USB Cameras for Face Recogniton With Antispoof]] [CAM-JX008][]
*[[AI accelarator Intel Movidus Neural Computation Module G38 MA2155]] [MOD-G38-MA2155][]
*[[AI accelarator Intel Movidus Neural Computation Module G38 MA2450]] [MOD-G38-MA2450][]
*[[All Weather Fixture With Adjustable Bracket for Security Camera]] [PART-CAM-BRACHET][]
*[[Hardware Kit for Off-line Store/Shopping mall Operational Management Solution Based on Face Recognition]] [KIT-AISHOP][]
*[[pcDuino9 mini embedded AI image processing module]] [MOD-AI-RK3288][]
*[[pcDuino9 AI visual edge computing development kit]] [KIT-AI-RK3288][]
*[[pcDuino9 AI visual edge computing development kit（Dome Camera 0722）]] [KIT-AI-RK3288-DOME-0722][]
*[[pcDuino9 AI visual edge computing development kit（Dome Camera 2812）]] [KIT-AI-RK3288-DOME-2812][]

*[[Intelligent Face Capture Box IBOX-C0001]] [BOX-IBOX-C0001][]
*[[YWA-TK series infrared reflective passenger flow counter]] [COUN-YWA-TK][]
*[[Networked 3D person counter]] [COUN-3D][]
*[[Infrared WIFI Passenger Flow Counter]][COUN-WIFI][]
*[[IP coaxial network transmitter IP HD network signals to coaxial cable/twisted-pair wire ]][][]
*[[1.1m upright column bracket Face Recognition Access Control Tablet Bracket ]][][]
*[[0.55m upright column bracket Face Recognition Access Control Tablet Bracket ]][][]
*[[Triangular Bracket Base of Face Recognition Access Control Tablet]][][]

== Intelligent products for pets ==

*[[Intelligent Laser Pet Companion Camera]] []
*[[Smart Pet Feeder (with Video) Remote Timing Feeding]] []

Retired

2020-08-10T01:55:08Z

Alvin:

== Microcontrollers ==
=== Arduino Shields ===

==== GSM/GPRS Shield====
*[[Quad-band GPRS/GSM Shield for Arduino ]] [SHD_GPRSSM5100][101101032]
*[[3G + GPS Shield for Arduino ]] [SHD_3G + AN_M_SMA_UFL][101101024]

==== GPS SD Shield ====
*[[GPS Shield With SD Card Slot for Arduino V2.0 A]] [SHD_GPSV2_A][101101006]
*[[GPS Shield With SD Card Slot for Arduino V2.0 B]] [SHD_GPSV2_B][101102006]
*[[GPS Shield with SD card slot for Arduino V3.0 with external GPS antenna]] [SHD_GPSV3][101101007]

==== LCD Shield ====
*[http://linksprite.com/wiki/index.php5?title=16_X_2_LCD_Keypad_Shield_for_Arduino 16 X 2 LCD Keypad Shield for pcDuino/Arduino] [SHD_LCD_1602_A][101101016] or [SHD_LCD_1602_B][101102016]

==== WiFi Shield ====
*[[CuHead WiFi Shield for Arduino V2.0]] [SHD_WIFI_CUHV2][101101002]
*[[CuHead WiFi Shield for Arduino Mega]] [SHDM_WIFI_CUH][101101003]
*[http://linksprite.com/wiki/index.php5?title=JUNIPER-_WiFi_Shield_for_Arduino_Based_on_GainSpan_Module JUNIPER WiFi Shield for Arduino Based on GainSpan Module] [SHD_WIFI_JNP][101101004]
*[[Anaconda WiFi Shield for Arduino ]] [SHD_WIFI_ANA_WOM + WIFI_MOD_ANA + AN_M_SMA_UFL][108301002]
*[[CC3000 WiFi Shield for Arduino]] [SHD_CC3000][101201003]

==== Music Shield====
*[http://linksprite.com/wiki/index.php5?title=Music_Shield_for_Arduino Music Shield for Arduino] [SHD_MUSIC][101101034]

====Ethernet Shield====
*[[Ethernet Shield]] [SHD_ETH] [101101028]

====Interface Conversion Shield ====
*[[RS232 Shield for Arduino]] [SHD_RS232][101101012]
*[[RS485 Shield for Arduino]] [SHD_RS485][101101013]

====Robotics Shield ====

*[[Arduino Smart Car]] [ ][ ]
*[[Arduino Smart Car Traction]] [ ][ ]

====Other Shield ====
*[[Xbee NRF24L01 Multi-Channel Relay Shield]][SHD_XBEE_RELAY]
*[[Proto shield for pcDuino]] [SHD_PROTOKITPCDUINO][101101031]
*[[Arduino XBee Shield Empty]] [SHD_XBEE2]
*[http://linksprite.com/wiki/index.php5?title=Narrow_Band_Powerline_Communication_Module_with_Simple_MAC Narrow Band Powerline Communication Module with Simple MAC][111101005]

=== AVR Based Arduino ===
*[[Arduino UNO Compatible USB Board R3 ]] [MP_ARD_UNOCOMBDR3][102201004]
*[[Diamondback WiFi Platform Compatible With Arduino]] [MP_WIFI_DIAMOND][102101002]
*[[Redback WiFi Platform Compatible With Arduino Nano]] [MP_WIFI_REDBACK][102101003]

=== IOIO ===
*[[IOIO V15]] [MP_IOIO][102101001]
*[[IOIO-OTG]] [MP_IOIOOTG][102101007]
**[[Micro USB OTG Cable]] [CAB_MICROUSB_OTG][117201003]

=== pcDuino ===

*[http://www.pcduino.com/?page_id=12 pcDuino] [MP_PCDUINO][102101006]
*[[pcDuino3A]] [MP_PCDUINO3A][102205006]
*[http://www.pcduino.com/?page_id=1770 pcDuino Lite WIFI] [MP_PCDUINOLITEWIFI][102104006]
*[http://www.pcduino.com/?page_id=1707 pcDuino Lite] [MP_PCDUINOLITE][102103006]

*[[pcDuino v2]] [MP_PCDUINOV2][102102006]
*[[pcDuino3]] [MP_PCDUINO3][102105006]

*[[LinkSprite Canyonlands]] [MP_CANLAND] [102201012]
*[[pcDuino4 STB With Enclosure : 4K Resolution]]
*[[pcDuino8 STB With Enclosure]]
*[[LinkSprite Acadia]] [MP_ACADIA] [102101009]

*[[Proto shield for pcDuino]] [SHD_PROTOKITPCDUINO][101101031]

*[[Bluetooth USB Module Mini for pcDuino]] [BT-USB-MINI][119201001]
*[[pcDuino Rover kit]][BOT_PDROVER_KIT][104201006]

*[http://linksprite.com/wiki/index.php5?title=USB_Sound_Card_with_Audio_Input/Output USB Sound Card with Audio Input/Output for pcDuino] [USB_SOUND_PCDUINO][108202003]

====3G====
*[[3G Cellular USB Dongle for pcDuino (Huawei E303s)]] [3G_E303S_PCD][122201001]
*[[TL-WR703N Wireless 3G Router]] [TL-WR703N][209201004]

====Kits====

*[[Kit for Scratch for pcDuino]] [ KIT_S4PA][108301007]
*[[Starter Kit for pcDuino3A UK Edition]] [KIT_PCD3A_SIG][108301012]
*[[Starter Kit for pcDuino3A US Edition]][KIT_PCDUINO3A_US][108403002]
*[[Starter Kit for pcDuino V2]]
*[[Starter Kit for pcDuino V2 US Edition]] [KIT_PCDUINO2_US][108402001]
*[[Scratch for pcDuino3 Basic A ]] [KIT_S4PA_BASIC_A][108401003]
*[[京东版pcDuino V2套件]][KIT_PCDUINO2][108401001]
*[[京东版pcDuino V2]] [KIT_PCDUINO2_JD][108403001]
*[http://linksprite.com/wiki/index.php5?title=Kit_for_pcDuino3 Starter Kit for pcDuino3] [KIT_PCDUINO3][108401002]

====Screens====
*[[1280x800 7" LVDS LCD with Capacitive Touch for pcDuino3]] [LCD_7PTH4PCD3_HR][124201008]

=== Pitaya ===

*[[ Pitaya ]] [MP_PITAYA][102201002]
*[[ Pitaya Dual Core ]] [MP_PITAYA_DUAL][102201001]

====Camera====
*[[2MP CSI Camera for pcDuino3]] [CAM_CSI2MP] [208201001]

== IoT ==

*[[ESP-32S Wifi Bluetooth Combo Module]][RP_ESP3212][213201002]

== Raspberry Pi Kits ==
*[[RS232/GPIO Shield for Raspberry Pi]] [SHD_RPI_RS232GPIO][101201001]
*[[RS232/GPIO Shield for Raspberry Pi V2.0]] [SHD_RPI_RS232GPIOV2] [101202001]
*[[RS485/GPIO Shield for Raspberry Pi]] [SHD_RPI_RS485GPIO][101201002]
*[[RS485/GPIO Shield for Raspberry Pi V2.0]] [SHD_RPI_RS485GPIOV2][101202002]
*[[Linker kit Base Shield for Raspberry Pi with ADC Interface ]] [LINKER_RPIBASE][118101020]
*[[Linker kit Base Shield for Raspberry Pi with ADC Interface V2.0]] [LINKER_RPIBASEV2][118102020]
*[[Starter Kit for Raspberry Pi]] [KIT_RPISTART][108301003]
*[[Raspberry Pi T-Shoemaker Breakout Kit]] [RPI_TCOBB_KIT][120201001]
*[[Raspberry Pi Assorted Lego Style Enclosure]] [RPI_LEGOSTYLE_CASE][120201002]
*[[Assembled Raspberry Pi Shoemaker Breakout]] [RPI_COBB][120201003]
*[[GPIO Ribbon Cable for Raspberry Pi]] [RPI_GPIOCABLE][120201004]
*[[Assembled Raspberry Pi T-Shoemaker Breakout]] [RPI_T_COBB][120201005]
*[[DS3231 Raspberry Pi RTC Board Real Time Clock Module for Arduino]][RPI_DS3231][120201007]

==Arduino Kits==

===LinkerKit===
*[[Magnetic Switch]] [LINKER_MAGSW][118101018]

== Components and Breakout Boards ==

=== GPS ===

*[[32 Channel LinkSprite GPS 5Hz Receiver ]] [GPS_SKG17][116201001]

=== Case and Enclosure===

*[[ Raspberry Pi Case]] [COM_RPI_CASE][114201009]
*[[ LinkSprite Clear Enclosure for Arduino ]] [COM_CASE_ARDU_CLEAR] [114201002]
*[[Lego Style Enclosure for pcDuino]] [COM_LECASE_PCDUINO][114201008]
*[[Acrylic Clear Enclosure for pcDuino With Removable Cover]] [COM_CASE_PCDUINO_ACCLEAR][114201006]
*[[DIY GPS Tracker with Android APP Viewer]][GPS_TRA][116201003]

=== WiFi ===
*[[FIR: Gainspan WiFi Module with Xbee Breakout]][WIFI_MOD_FIR][103101001]
*[[UART WIFI Module]] [WIFI_MOD_ANA][103201001]

=====Other Sensor=====

*[[MQ-2 Semiconductor Sensor for Combustible Gas]][SEN_MQ2][115201008]
*[[MQ-4 Semiconductor Sensor for Natural Gas]][SEN_MQ4][115201009]
*[[MQ-6 Semiconductor Sensor for LPG]][SEN_MQ6][115201010]
*[[MQ-7 Semiconductor Sensor for Carbon Monoxide]][SEN_MQ7][115201011]

== JPEG Cameras ==

===JPEG Camera With Case===
*[[LinkSprite Weather Proof JPEG Serial Port Camera with Infrared (TTL UART)]] [CAM_AW_JPEG_TTLUART][203201001]
*[[LinkSprite Weather Proof JPEG Serial Port Camera with Infrared (RS232)]] [CAM_AW_JPEG_RS232][203201002]
*[[LinkSprite Weather Proof JPEG Serial Port Camera with Infrared (RS485)]] [CAM_AW_JPEG_RS485][203201003]
*[[LinkSprite Weather Proof Long Distance 120degree JPEG Serial Port Camera with Infrared (RS485)]] [CAM_AW_JPEG_120DLR_RS485][203202003]

*[[1.3Mp LinkSprite Long Range Weather Proof Infrared JPEG ]] [CAM_AW_JPEG_LR_1P3M][204201002]
*[[0.3Mp LinkSprite Long Range Weather Proof Infrared JPEG]] [CAM_AW_JPEG_LR_0P3M][204201001]
*[[5Mp LinkSprite Long Range Weather Proof Infrared JPEG Camera]] [CAM_AW_JPEG_LR_5M][204201003]

*[[JPEG 2M Pixel Color Camera Serial Interface(TTL level)]] [CAM_JPEG_2M_TTLUART][201201004]
*[[JPEG 2M Pixel Color Camera Serial Interface(RS232 level)]] [CAM_JPEG_2M_RS232][201201005]

==Robotics==
===Rover===

*[[Acrylic Turtle 2WD Mobile Video Robot powered by pcDuino2]] [KIT_BOT_T2WDACY_VIDEO][108401004]
*[[Acrylic Turtle 2WD Mobile Video Robot powered by pcDuino3]] [KIT_BOT_T2WDACY_VIDEO_PD3][108401005]

*[[Dobot Industrial Robotic Arm Desktop Robot]] [DOB_ARM][215201001]

*[[JGB37-550 DC6V 12V High Torque Turbo DC Motor]] [Turbo_DC_Motor ] [131201002]

===Servo===

*[[SG90 mini servo for webcam]][SV_SG90][108202004-3]

===Fixture for Servos===
*[[Fixture for servos of webcam used for Robotics]] [FIX_SERVO_CAM][108202004-2]

== S3C6410 Development Kit==

*[[LS6410 SAMSUNG ARM11 S3C6410 board kit Without LCD ]] [KIT_LS6410_WOLCD][108201008]
*[[LS6410 SAMSUNG ARM11 S3C6410 board kit 4.3 TFT LCD ]] [KIT_LS6410_4P3][108201009]
*[[LS6410 SAMSUNG ARM11 S3C6410 board kit 7.0 TFT LCD ]] [KIT_LS6410_7][108201010]
*[[Camera Module (3M pixel) for ARM development board]] [CAM_LS6410_OV3640_3MP][205201001]
*[[Camera Module (1.3M pixel) for ARM development board]] [CAM_LS6410_OV9650_1P3MP][205201002]
*[[Four-band GSM/GPRS Module SIM300 for LS6410 S3C6400 Dev Board]] [CL_LS6410_SIM300][113201001]

== Home Automation ==

*[[LifeDoo Wifi Video Door Phone]] [HA_WIFIDOORCAM] [210201002]

*[[Anycast M2 Miracast Wifi DLNA Airplay Mirror HDMI Dongle]][ LF_Anycast_M2][135201002]

*[[Remote Controller]][ZIG_RE_CO][137201007]

== Linker kit ==

=== Sensors ===

*[[Low-cost LoRa Module]][LINKER_LORA_MOD][118101036]

== RFID ==
=== Tag ===

*[[LS0832- Dual Frequencies UHF+HF RFID tag]] [RFID_UHFHF_CARDTAG_LS0832][107201009]
*[[UHF RFID tag for flex surface (tape on back) Transparent , EPC Gen2 (900MHz)]] [RFID_UHF_FLEXTRANTAG][107201010]

====Integrated Readers====
*[[Long Range UHF RFID reader (1-6 meters) (ISO18000-6C EPC G2) RS232]] [RFID_UHF_READER_WAN_0702_RS232][107201016]
*[[Long Range UHF RFID reader (1-6 meters) (ISO18000-6C EPC G2) RJ45]] [RFID_UHF_READER_WAN_0702_RJ45][107201017]
*[http://linksprite.com/wiki/index.php5?title=Integrated_far-distance_reader_(1-15meters) Long Range UHF RFID reader (1-15 meters)(ISO18000-6C EPC G2) RS232] [RFID_UHF_READER_WAN_0703_RS232][107201018]
*[[Long Range UHF RFID Reader (1-25meters) (ISO18000-6C EPC G2) RS232]] [RFID_UHF_READER_WAN_0704_RS232][107201019]

==Tools==

===Engraver Machine===

**[[2.5W Laser Head for DIY CNC 3 Axis Engraver Machine]][KIT_CNC_LASHA _2.5W][108301028]

==AI==

===Facial Recognition Camera===

*[[2MP IR POE Bullet Zoom Network Camera with Face Capture Output (face capture distance up to 27 foot)]] [CAM-iHD23-2K385-FP-JH-POE]
*[[2MP IR POE Bullet Zoom Dome Network Camera with Face Capture Output]] [iHD35-0922A]
*[[2MP IR Pinhole Network Camera with Face Capture Output]] [DC-PL2JS1200]
*[[2MP IR POE Network Dome Camera with Face Capture Output]] [DC-DO2ZD1200]
*[[2MP IR POE Bullet Zoom P2P Wireless WiFi Network Camera with Face Capture Output]] [DC-BO2ZD12-wifi]
*[[2MP IR Bullet P2P Wireless WiFi Network Camera with Face Capture Output]] [DC-BO2ZD08-wifi]
*[[2MP IR POE Bullet Zoom Network Camera 4G camera with Face Capture Output]]
*[[2MP IR POE Bullet Zoom Network Camera with Face Capture Output (face capture distance up to 27 foot)]] [CAM-iHD23-2K385-FP-JH-POE][]
*[[2MP IR POE Bullet Zoom 4G WIFI Sim Card Network Camera with Face Capture Output]] [iHD26-0922-4GA][]
*[[USB2.0 Wide Dynamic Range Camera for Face Recognition]] [CAM-JX007][]

Ai

2020-08-10T01:48:23Z

Alvin: /* Facial Capture AI Smart Camera */

== Facial Capture AI Smart Camera ==

*[[2MP IR POE Bullet Zoom Network Camera with Face Capture Output (face capture distance up to 27 foot)]] [CAM-iHD23-2K385-FP-JH-POE]
*[[2MP IR POE Bullet Zoom Dome Network Camera with Face Capture Output]] [iHD35-0922A]
*[[2MP IR Pinhole Network Camera with Face Capture Output]] [DC-PL2JS1200]
*[[2MP IR POE Network Dome Camera with Face Capture Output]] [DC-DO2ZD1200]
*[[2MP Network IP Camera with Facial Recognition For Payment Verification on POS Device]]
*[[2MP IR POE Bullet Zoom P2P Wireless WiFi Network Camera with Face Capture Output]] [DC-BO2ZD12-wifi]
*[[2MP IR Bullet P2P Wireless WiFi Network Camera with Face Capture Output]] [DC-BO2ZD08-wifi]
*[[2MP IR POE Bullet Zoom Network Camera 4G camera with Face Capture Output]]
*[[PercepCam POE Mini Dome Gun Detection Camera Surveillance camera]] [DC-DO2ZD3600-G]
*[[PercepCam POE Mini Dome Gun Detection Camera Surveillance camera]] [DC-DO2ZD3600-G]

== Access Control Tablet ==

*[[(Binocular Camera Version) 7.0”Flat Plate Facial Recognition Tablet]] [AI-7020S][]
*[[7.0”Flat Plate Facial Recognition Terminal for the Speed Gate]] [AI-7020P][]
*[[7.0”Access Gate Facial Recognition Terminal]] [AI-7020C][]
*[[Visitor Welcome System Based on Face Recognition]] [AI-WELC-SYS][]
*[[pcDuino9s: Industry Grade RK3288 Single Board Computer with Linux or Android with Metal Enclosure]] [MP_RK3288_ENC][]
*[[2MP IR POE Bullet Zoom Network Camera with Face Capture Output (face capture distance up to 27 foot)]] [CAM-iHD23-2K385-FP-JH-POE][]
*[[2MP IR POE Bullet Zoom 4G WIFI Sim Card Network Camera with Face Capture Output]] [iHD26-0922-4GA][]

*[[2MP Fish Eye Shelf Camera With JPEG Output for Smart Shelf Application]] [CAM-FISH-OBJECT][]
*[[USB2.0 Wide Dynamic Range Camera for Face Recognition]] [CAM-JX007][]
*[[RGB/Infrared USB Cameras for Face Recogniton With Antispoof]] [CAM-JX008][]
*[[AI accelarator Intel Movidus Neural Computation Module G38 MA2155]] [MOD-G38-MA2155][]
*[[AI accelarator Intel Movidus Neural Computation Module G38 MA2450]] [MOD-G38-MA2450][]
*[[All Weather Fixture With Adjustable Bracket for Security Camera]] [PART-CAM-BRACHET][]
*[[Hardware Kit for Off-line Store/Shopping mall Operational Management Solution Based on Face Recognition]] [KIT-AISHOP][]
*[[pcDuino9 mini embedded AI image processing module]] [MOD-AI-RK3288][]
*[[pcDuino9 AI visual edge computing development kit]] [KIT-AI-RK3288][]
*[[pcDuino9 AI visual edge computing development kit（Dome Camera 0722）]] [KIT-AI-RK3288-DOME-0722][]
*[[pcDuino9 AI visual edge computing development kit（Dome Camera 2812）]] [KIT-AI-RK3288-DOME-2812][]

*[[Intelligent Face Capture Box IBOX-C0001]] [BOX-IBOX-C0001][]
*[[YWA-TK series infrared reflective passenger flow counter]] [COUN-YWA-TK][]
*[[Networked 3D person counter]] [COUN-3D][]
*[[Infrared WIFI Passenger Flow Counter]][COUN-WIFI][]
*[[IP coaxial network transmitter IP HD network signals to coaxial cable/twisted-pair wire ]][][]
*[[1.1m upright column bracket Face Recognition Access Control Tablet Bracket ]][][]
*[[0.55m upright column bracket Face Recognition Access Control Tablet Bracket ]][][]
*[[Triangular Bracket Base of Face Recognition Access Control Tablet]][][]

== Intelligent products for pets ==

*[[Intelligent Laser Pet Companion Camera]] []
*[[Smart Pet Feeder (with Video) Remote Timing Feeding]] []