JPEG 2M Pixel Color Camera Serial Interface V2 (RS232 level)

From LinkSprite Playgound
Jump to: navigation, search

Description

LS-Y201-2MP is LinkSprite’s new generation high resolution serial port camera module. Its resolution is 2 million pixel. It can captures high resolution pictures using the serial port. LS-Y201-2MP is a modular design that outputs JPEG images through UART, and can be easily integrated into existing design.

Package List

  • 1 X [CAM_JPEG_2M_RS232_V2][201202005]
  • 1 X [IT_CAM_IR_CAB ][AA101103]


JPEG 2M Pixel Color Camera Serial Interface V2.jpg


Cable included:[IT_CAM_IR_CAB ][AA101103]

IT CAM IR CAB-1.jpg

Specification

  • 2 Million Pixels
  • Support capture JPEG from serial port
  • Default baud rate of serial port is 38400
  • DC 3.3V or 5V power supply
  • Size 32mm X 32mm
  • Current consumption: 80-100mA
  • The pin near C03 is AV output pin, which is an analog output pin.

JPEG 2M Electric Parameters.png

JPEG 2M Optical Parameters.png

JPEG 2M Night vison parameters.png

JPEG 2M Interface Parameters.png

Application Idea

  • Different image capture systems
  • Environmental monitoring
  • Industry monitoring
  • Medical equipment
  • Video phone
  • Security
  • Vehicle based GPS

Usage

Hardware Installation

Evaluation Setup

Evasetup.jpg

Programming

Evascreenshot.jpg

  • Step 1: Click Open COM
  • Step 2: Click Single Shot.

Arduino sample code provided <syntaxhighlight lang="c"> /* Linksprite */

  1. include <NewSoftSerial.h>

byte incomingbyte; NewSoftSerial mySerial(4,5); //Configure pin 4 and 5 as soft serial port int a=0x0000,j=0,k=0,count=0; //Read Starting address uint8_t MH,ML; boolean EndFlag=0;

void SendResetCmd(); void SendTakePhotoCmd(); void SendReadDataCmd(); void StopTakePhotoCmd();

void setup() {

 Serial.begin(19200);
 mySerial.begin(38400);

}

void loop() {

    SendResetCmd();
    delay(4000);                               //After reset, wait 2-3 second to send take picture command
     
     SendTakePhotoCmd();
    while(mySerial.available()>0)
     {
       incomingbyte=mySerial.read();
     }   
     byte a[32];
     
     while(!EndFlag)
     {  
        j=0;
        k=0;
        count=0;
        SendReadDataCmd();
        delay(25);
         while(mySerial.available()>0)
         {
              incomingbyte=mySerial.read();
              k++;
              if((k>5)&&(j<32)&&(!EndFlag))
              {
              a[j]=incomingbyte;
              if((a[j-1]==0xFF)&&(a[j]==0xD9))      //Check if the picture is over
              EndFlag=1;                           
              j++;

count++;

              }
         }
        
         for(j=0;j<count;j++)
         {   if(a[j]<0x10)
             Serial.print("0");
             Serial.print(a[j],HEX);
             Serial.print(" ");
         }                                       //Send jpeg picture over the serial port
         Serial.println();
     }      
    while(1);

}

//Send Reset command void SendResetCmd() {

     mySerial.print(0x56, BYTE);
     mySerial.print(0x00, BYTE);
     mySerial.print(0x26, BYTE);
     mySerial.print(0x00, BYTE);

}

//Send take picture command void SendTakePhotoCmd() {

     mySerial.print(0x56, BYTE);
     mySerial.print(0x00, BYTE);
     mySerial.print(0x36, BYTE);
     mySerial.print(0x01, BYTE);
     mySerial.print(0x00, BYTE);  

}

//Read data void SendReadDataCmd() {

     MH=a/0x100;
     ML=a%0x100;
     mySerial.print(0x56, BYTE);
     mySerial.print(0x00, BYTE);
     mySerial.print(0x32, BYTE);
     mySerial.print(0x0c, BYTE);
     mySerial.print(0x00, BYTE); 
     mySerial.print(0x0a, BYTE);
     mySerial.print(0x00, BYTE);
     mySerial.print(0x00, BYTE);
     mySerial.print(MH, BYTE);
     mySerial.print(ML, BYTE);   
     mySerial.print(0x00, BYTE);
     mySerial.print(0x00, BYTE);
     mySerial.print(0x00, BYTE);
     mySerial.print(0x20, BYTE);
     mySerial.print(0x00, BYTE);  
     mySerial.print(0x0a, BYTE);
     a+=0x20;                            //address increases 32,set according to buffer size

}

void StopTakePhotoCmd() {

     mySerial.print(0x56, BYTE);
     mySerial.print(0x00, BYTE);
     mySerial.print(0x36, BYTE);
     mySerial.print(0x01, BYTE);
     mySerial.print(0x03, BYTE);        

}

</syntaxhighlight>

Support

If you have questions or other better design ideas, you can go to our forum to discuss or creat a ticket for your issue at linksprite support.

Resources

How to buy

Here to buy on LinkSprite Cart