Laser Head for DIY CNC 3 Axis Engraver Machine 2.5W
This is a Laser Head for DIY CNC 3 Axis Engraver Machine PCB Milling Wood Carving Router Kit Arduino Grbl.
The optical output power is 2.5w
This is a Laser engraving machine dedicated module.
- Speckle pattern: dot (focus)
- The wavelength of this laser is 445nm(blu-ray)
- Driving mode: ACC (constant current driver)
- The cooling way: forced air cooling
- The input voltage: 12 v DC
- Input mode: XH - 2 p
- Dimension: 33 x33x62. 4 mm (including the thickness of the fan)
- The power of laser module is relatively high, only for industrial use. Lighting directly to eyes is forbidden which will hurt the eyes.
- It is prohibited to use in the place where there are inflammable materials and gas, or it could cause fires and explosions.
- Children are prohibited from contacting with the laser product.
- Do not open the case of this module or it could be damaged.