From LinkSprite Playgound
|
|
| Line 1: |
Line 1: |
| − | = Introduction =
| |
| − | ONetSwitch45 is an All Programmable open networking innovation platform.
| |
| − | ONetSwitch45 is based on the Xilinx Zynq-7000 SoC, adopts the Gigabit ports and the 10G ports, and can extend wireless or storage. Both its software and hardware can realize custom programming. Its reference designs are abundant and flexible, can be used to various researches on the evolution of network prototypes, and the development of customized network products. Especially, the features of the miniaturization and low power are adapted to the multi-node network tests and deployments.
| |
| | | | |
| − | = Features =
| |
| − | *General
| |
| − | Main Silicon XC7Z045-2FFG676
| |
| − | Power Supply DC 12V
| |
| − | Primary Config. SD card
| |
| − | Auxiliary Config. QSPI flash/JTAG
| |
| − | Processing System
| |
| − | *Processor Dual ARM Cortex-A9@800MHz
| |
| − | Cache (L1)32KB Inst. + 32KB Data per core; (L2)512KB; (OCM)256KB
| |
| − | DRAM DDR3 1GBytes
| |
| − | Flash Quad SPI flash 256Mb
| |
| − | DMA 8 channel (4 for Programmable Logic)
| |
| − | Ethernet 1x GE RJ45
| |
| − | Peripherals USB / USB-UART / USB JTAG / SD card
| |
| − | *Programmable Logic
| |
| − | FPGA Logic 350K LCs, Kintex-7, ~5.2M ASIC gates
| |
| − | Host I/F AMBA AXI4 interconnect, max 100Gbps between PS-PL
| |
| − | SRAM QDRII+ 72Mb, 57.6Gbps@400MHz
| |
| − | Ethernet 4x GE RJ45, 4x 10GE SFP+
| |
| − | Peripherals FMC HPC, including 3x 10Gbps XCVRs
| |
| − | User IO user LEDs/push buttons/DIP switch
| |
| − | Extension mini PCIe for wireless NIC or SSD
| |
| − |
| |
| − | = Block Diagram =
| |
| − |
| |
| − | [[File:ONetSwitch45.jpg| 640px]]
| |
Revision as of 05:34, 22 July 2016
