Quad-band GPRS/GSM Shield for Arduino Mega

Introduction

LinkSprite SM5100B GSM/GPRS module: a miniature, single-side board, quad-band GSM 850/EGSM 900/DCS 1800/PCS 1900 module, ready for integration in various kinds of Fix wireless phones and other wireless devices.

USA providers are all on 850/1900Mhz and pratically all the rest of the world uses 900/1800Mhz.

Schematic

• Schematics

Specification

Temperature range	Normal range: -10°C to +55°C (full compliant) Storage: -40°C to +85°C
Weight	< 9g
Physical dimensions	35.0X39.0X2.9 mm (typical)
Connections	60 pins
Power Supply	VBAT: 3.3V to 4.2V range, 3.6V typical.
Power consumption	Off mode: <100uA Sleep mode: <2.0mA Idle mode: <7.0mA (average) Communication mode: 350 mA (average,GSM) Communication mode: 2000mA (Typical peak during TX slot,GSM)

Usage

Due to the large current of the GPRS module, a wall adaptor is recommended: http://www.cutedigi.com/product_info.php?products_id=4184

Hardware Installation

Tutorial 1

Jumpers position:

J1: 5100RX to TX1

J2: 5100TX to RX1

Pass through code:

<syntaxhighlight lang="c">

1. include //Used for string manipulations

char incoming_char=0; //Will hold the incoming character from the Serial Port.

void setup()

{

 //Initialize serial ports for communication.

Serial.begin(9600);

Serial1.begin(9600);

Serial.println("Starting SM5100B Communication...");

}

void loop()

{

//If a character comes in from the cellular module...

if(Serial1.available() >0)

{

incoming_char=Serial1.read(); //Get the character from the cellular serial port.

Serial.print(incoming_char); //Print the incoming character to the terminal.

}

//If a character is coming from the terminal to the Arduino...

if(Serial.available() >0)

{

incoming_char=Serial.read(); //Get the character coming from the terminal

Serial1.print(incoming_char); //Send the character to the cellular module.

}

}

</syntaxhighlight>

FAQ

Please list your question here:

Support

If you have questions or other better design ideas, you can go to our forum to discuss or creat a ticket for your issue at linksprite support.

How to buy

Here to buy Quad-band GPRS/GSM Shield for Arduino MegaARDUI_MEGA_5100_GPRS on LinkSprite Cart

See Also

Other related products and resources.

Licensing

This documentation is licensed under the Creative Commons Attribution-ShareAlike License 3.0 Source code and libraries are licensed under GPL/LGPL, see source code files for details.