Difference between revisions of "LinkSprite Extension Plate for Clear Enclosure for Arduino"
Katherine.d (talk | contribs) (→Usage) |
|||
| Line 1: | Line 1: | ||
== Introduction == | == Introduction == | ||
| − | This LinkSprint extension plate is a standard accessory for LinkSprite Arduino enclosure to | + | This LinkSprint extension plate is a standard accessory for LinkSprite Arduino/pcDuino enclosure. It allows the enclosure to have more internal space, so that you add more shields or experiment boards to pcDuino/Arduino, and still fit into the enclosure. |
| + | |||
| + | The extension plate is made of the same ABS material as that of the pcDuino/Arduino enclosure. When used with the pcDuino/Arduino enclosure, it fits nicely with the existing enclosure. You can apply one or more plates based on your need. What you need to do is to fasten by the copper cylinder in the package. | ||
| − | |||
[[File:enclosure5.jpg | 400px]] | [[File:enclosure5.jpg | 400px]] | ||
== Usage == | == Usage == | ||
| − | *1. | + | *1. Install the pcDuino/Arduino enclosure as the normal one ([http://linksprite.com/wiki/index.php5?title=LinkSprite_Clear_Enclosure_for_Arduino#Usage step 1 to step 3]). |
| − | *2. | + | *2. Fit the extension plate into the groove on the bottom panel. |
*3. Insert the copper cylinder, you can install more extension plates if you have more shields or you need more internal space. | *3. Insert the copper cylinder, you can install more extension plates if you have more shields or you need more internal space. | ||
| Line 15: | Line 16: | ||
*4. Connect your project. | *4. Connect your project. | ||
| − | *5. Instal the end pieces and drill them | + | *5. Instal the end pieces and drill them according to your requirement. |
*6. Cover with the lid and fasten by the screws at last. | *6. Cover with the lid and fasten by the screws at last. | ||
[[File:enclosure4.jpg | 400px]] | [[File:enclosure4.jpg | 400px]] | ||
Revision as of 04:48, 7 April 2013
Introduction
This LinkSprint extension plate is a standard accessory for LinkSprite Arduino/pcDuino enclosure. It allows the enclosure to have more internal space, so that you add more shields or experiment boards to pcDuino/Arduino, and still fit into the enclosure.
The extension plate is made of the same ABS material as that of the pcDuino/Arduino enclosure. When used with the pcDuino/Arduino enclosure, it fits nicely with the existing enclosure. You can apply one or more plates based on your need. What you need to do is to fasten by the copper cylinder in the package.
Usage
- 1. Install the pcDuino/Arduino enclosure as the normal one (step 1 to step 3).
- 2. Fit the extension plate into the groove on the bottom panel.
- 3. Insert the copper cylinder, you can install more extension plates if you have more shields or you need more internal space.
- 4. Connect your project.
- 5. Instal the end pieces and drill them according to your requirement.
- 6. Cover with the lid and fasten by the screws at last.
