Difference between revisions of "Acrylic Frame Robot Platform"
Qian.zhang (talk | contribs) (→Explanation of Acrylic Top Plate) |
Qian.zhang (talk | contribs) (→Package List) |
||
| (4 intermediate revisions by the same user not shown) | |||
| Line 2: | Line 2: | ||
[[File:Acrylic Frame robot platform.jpg]] | [[File:Acrylic Frame robot platform.jpg]] | ||
| + | |||
| + | [[File:Acrylic robot package list.jpg]] | ||
| + | |||
| + | == Features == | ||
| + | |||
| + | Dimensions: 182×202×82mm | ||
| + | |||
| + | Net weight: 412g | ||
== Package List == | == Package List == | ||
| Line 27: | Line 35: | ||
== Assembly Instructions == | == Assembly Instructions == | ||
| − | |||
*Solder Jumper Wires on both DC Motors. Use 4 M3*25 screws to fix the DC motors on Acrylic Bottom Plate, note that the bump of DC motors should be aimed to the holes on Acrylic Bottom Plate. | *Solder Jumper Wires on both DC Motors. Use 4 M3*25 screws to fix the DC motors on Acrylic Bottom Plate, note that the bump of DC motors should be aimed to the holes on Acrylic Bottom Plate. | ||
[[File:Acrylic robot platform1.jpg]] | [[File:Acrylic robot platform1.jpg]] | ||
| + | |||
*Use 2 M3*12 screws to fix Ball Caster Metal on Acrylic Bottom Plate. | *Use 2 M3*12 screws to fix Ball Caster Metal on Acrylic Bottom Plate. | ||
| − | [[File:Acrylic robot | + | [[File:Acrylic robot platform2.jpg]] |
| + | |||
*Use 2 M3*12 screws to fix Batter Case on Acrylic Bottom Plate. | *Use 2 M3*12 screws to fix Batter Case on Acrylic Bottom Plate. | ||
| Line 42: | Line 51: | ||
[[File:Acrylic robot platform4.jpg]] | [[File:Acrylic robot platform4.jpg]] | ||
| − | * | + | |
| + | *Use 2 M3*12 screws to fix Acrylic Connecting Plate(6 holes) on the left side(from top view, the battery case is at bottom) of Acrylic Bottom Plate, use another 2 M3*12 screws to fix Acrylic Connecting Plate(5 holes) on the other side. | ||
[[File:Acrylic robot platform5.jpg]] | [[File:Acrylic robot platform5.jpg]] | ||
| − | + | ||
| + | *Install two wheels. | ||
| + | |||
| + | [[File:Acrylic robot platform6.jpg]] | ||
| + | |||
| + | |||
| + | *Use 4 M3*12 screws to fix Acrylic Top Plate on Acrylic Bottom Plate. | ||
| + | |||
| + | [[File:Acrylic robot platform7.jpg]] | ||
Latest revision as of 06:53, 2 September 2014
Contents
Introduction
Features
Dimensions: 182×202×82mm
Net weight: 412g
Package List
- 1 × Acrylic Top Plate [IT_KIT_ACRYTOPPL]] [CA101102]
- 1 × Acrylic Bottom Plate [IT_KIT_ACRYBOTTPL] [CA101103]
- 1 × Acrylic Connecting Plate（5 holes） [IT_KIT_ACRY CONNPL5HO][CA101104]
- 1 × Acrylic Connecting Plate（6 holes） [IT_KIT_ACRY CONNPL6HO][CA101105]
- 2 × Motor [IT_MOTOR_DC3V_6V] [WH103101]
- 2 × Wheel [IT_TIRE_A] [WH101102]
- 10× Jumper Wires [IT_JUMR_MM_PK40_WI20CM][BB101104]
- 1 × Acrylic Web Cam Plate [IT_ACRY_WEDCAMPL] [CA101106]
- 1 × Battery Case [IT_BYPS_6_5][WH104101]
- 16× Screw 3mm*6 [IT_SCREW_6MM] [WB101102]
- 16× Screw 3mm*12 [IT_SCREW_12MM] [WB101103]
- 4 × Screw 3mm*25 [IT_SCREW_25MM] [WB101104]
- 1 × Ball Caster Metal [BOT_PT_OMNIDMETAL][104201008]
- 8 × Copper Pillar [IT_COPPCYL_6MM] [WA101102]
- 24× M3 Nut [IT_NUT_3M][WB101101]
Explanation of Acrylic Top Plate
Assembly Instructions
- Solder Jumper Wires on both DC Motors. Use 4 M3*25 screws to fix the DC motors on Acrylic Bottom Plate, note that the bump of DC motors should be aimed to the holes on Acrylic Bottom Plate.
- Use 2 M3*12 screws to fix Ball Caster Metal on Acrylic Bottom Plate.
- Use 2 M3*12 screws to fix Batter Case on Acrylic Bottom Plate.
- Use 2 M3*12 screws to fix Acrylic Connecting Plate(6 holes) on the left side(from top view, the battery case is at bottom) of Acrylic Bottom Plate, use another 2 M3*12 screws to fix Acrylic Connecting Plate(5 holes) on the other side.
- Install two wheels.
- Use 4 M3*12 screws to fix Acrylic Top Plate on Acrylic Bottom Plate.
