Difference between revisions of "High Power Led Module"

From LinkSprite Playgound
Jump to: navigation, search
(Features)
(Introduction)
 
(2 intermediate revisions by the same user not shown)
Line 3: Line 3:
  
 
[[File:High power LED module.jpg]]
 
[[File:High power LED module.jpg]]
 +
 +
== Specification ==
 +
 +
The high power led unit is 3528.
 +
 +
*Working Voltage: 3.0-3.4V
 +
 +
*Operating current: 20mA
  
 
== Features ==
 
== Features ==
  
Dimensions: 29×20×9.5mm
+
Dimensions: 28.9×20.0×9.5mm
  
 
Net weight: 2.4g
 
Net weight: 2.4g
Line 12: Line 20:
 
== Dimension ==
 
== Dimension ==
  
[[File:High power led dimension.jpg]]
+
[[File:High power led dimension1.jpg]]
  
 
== Schematics ==
 
== Schematics ==

Latest revision as of 08:02, 17 September 2014

Introduction

This is a high power LED module. It has five bright LEDs.

High power LED module.jpg

Specification

The high power led unit is 3528.

  • Working Voltage: 3.0-3.4V
  • Operating current: 20mA

Features

Dimensions: 28.9×20.0×9.5mm

Net weight: 2.4g

Dimension

High power led dimension1.jpg

Schematics

Application Ideas

test <syntaxhighlight lang="c"> /*

 Linker High Power LED
 the LED will turn on for 1s and then turn off for 1s, and so on.

 This example code is in the public domain.
*/

int LEDControlPin = 12; void setup() {

 // initialize the digital pin as an output.
 
 pinMode(LEDControlPin, OUTPUT);     

}

void loop() {

 digitalWrite(LEDControlPin, HIGH);   // set the LED on
 delay(1000);              // wait for a second
 digitalWrite(LEDControlPin, LOW);    // set the LED off
 delay(1000);              // wait for a second

} </syntaxhighlight>

High Power LED link.jpg

How to buy

Here to buy High Power Led Module on store