Difference between revisions of "Battery for Robot 4800mAH Europe Edition"
Qian.zhang (talk | contribs) (Created page with "== Introduction == This is a battery pack for robot application. This edition contains an Europe wall adpter. File:rover batt europe.jpg ==Specification== Battery: Inpu...") |
Qian.zhang (talk | contribs) (→Specification) |
||
Line 7: | Line 7: | ||
==Specification== | ==Specification== | ||
Battery: | Battery: | ||
− | Input: 12.6VDC | + | *Input: 12.6VDC |
− | Output: 12VDC, 4800mAH | + | *Output: 12VDC, 4800mAH |
− | Charger: | + | *Charger: |
− | Input: 110-240VAC 50/60Hz | + | *Input: 110-240VAC 50/60Hz |
− | Output: 12.6DC, 350mA | + | *Output: 12.6DC, 350mA |
Hardware Included: | Hardware Included: |
Latest revision as of 10:13, 17 October 2014
Introduction
This is a battery pack for robot application. This edition contains an Europe wall adpter.
Specification
Battery:
- Input: 12.6VDC
- Output: 12VDC, 4800mAH
- Charger:
- Input: 110-240VAC 50/60Hz
- Output: 12.6DC, 350mA
Hardware Included:
- Wall adapter charger
- Rechargeable Li-on battrery
Usage
There is a switch on the battery pack. Please turn the switch to the ON position during charging and discharging.
On the switch, there is a LED there to indicate the charging.
A charger is included to charge the battery. To charge the battery, the connection is as following:
When applying AC power to wall adapter, the red LED will turn on. The green LED will turn on when charging battery.