Difference between revisions of "Linker Mezzanine card for 96board"
(Created page with "== Introduction == == Features == There are 8 4-pin 2.54mm spacing housing on the card and these connectors covering Analog, UART I2C, and GPIO can connect Linker kit modul...") |
(→Description) |
||
| (6 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | == | + | ==Description == |
| + | [[File:1-5.png]] | ||
| − | |||
| − | There are 8 | + | Linker Mezzanine card is a shield breadout board designed for 96board. All the Linker kit modules can be plugged onto 96board through this card. There are bidirectional voltage-level translators which allows for low-voltage bidirectional translation between any of the 1.2-V,1.5-V, 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes. So it compatibles with 3.3V or 5V module and make connecting peripheral more easily. You just plug a jumper onto JP9 to select which input voltage do you have. Moreover, this shield has an on-board ADC chip so that analog output modules can be used on 96board. The ADC chip used is MCP3004. It talks to 96board using SPI interface. |
| + | == Features == | ||
| − | + | *8 connecctors covering Analog, UART, I2C and GPIO | |
| + | *Two channels of analog input using MCP3004 ADC chip | ||
| + | == Schematic diagram == | ||
| − | + | [[File:1-4.jpg]] | |
Latest revision as of 06:26, 25 December 2015
Description
Linker Mezzanine card is a shield breadout board designed for 96board. All the Linker kit modules can be plugged onto 96board through this card. There are bidirectional voltage-level translators which allows for low-voltage bidirectional translation between any of the 1.2-V,1.5-V, 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes. So it compatibles with 3.3V or 5V module and make connecting peripheral more easily. You just plug a jumper onto JP9 to select which input voltage do you have. Moreover, this shield has an on-board ADC chip so that analog output modules can be used on 96board. The ADC chip used is MCP3004. It talks to 96board using SPI interface.
Features
- 8 connecctors covering Analog, UART, I2C and GPIO
- Two channels of analog input using MCP3004 ADC chip
Schematic diagram
