Difference between revisions of "RB-150CS: Servo with 360 Degree freedom"
(Created page with "Specifications: Control System: +Pulse Width Control 1500usec Neutral Operating Voltage: 4.8-7.2 Volts Operating Temperature Range: 0 to +60 Degree Operating Speed (4.8V): 0....") |
|||
| Line 1: | Line 1: | ||
Specifications: | Specifications: | ||
| − | Control System: +Pulse Width Control 1500usec Neutral | + | *Control System: +Pulse Width Control 1500usec Neutral |
| − | Operating Voltage: 4.8-7.2 Volts | + | *Operating Voltage: 4.8-7.2 Volts |
| − | Operating Temperature Range: 0 to +60 Degree | + | *Operating Temperature Range: 0 to +60 Degree |
| − | Operating Speed (4.8V): 0.16sec/60° at no load | + | *Operating Speed (4.8V): 0.16sec/60° at no load |
| − | Operating Speed (6V): 0.14sec/60° at no load | + | *Operating Speed (6V): 0.14sec/60° at no load |
| − | Operating Speed (7.2V): 0.12sec/60° at no load | + | *Operating Speed (7.2V): 0.12sec/60° at no load |
| − | Stall Torque:(4.8V): 3kg·cm ;(6.0V): 3.5kg·cm | + | *Stall Torque:(4.8V): 3kg·cm ;(6.0V): 3.5kg·cm |
| − | Dead Band Width: 10usecConnector Wire Length: 300mm | + | *Dead Band Width: 10usecConnector Wire Length: 300mm |
| − | Dimensions: 40.8mm X 20.1mm X 38mm | + | *Dimensions: 40.8mm X 20.1mm X 38mm |
| − | Weight: 56g | + | *Weight: 56g |
| − | location of each pin: red (+),brown (-), yellow (signal) | + | *location of each pin: red (+),brown (-), yellow (signal) |
Servo has three wires: Brown, Red and Orange. | Servo has three wires: Brown, Red and Orange. | ||
Revision as of 09:59, 11 November 2012
Specifications:
- Control System: +Pulse Width Control 1500usec Neutral
- Operating Voltage: 4.8-7.2 Volts
- Operating Temperature Range: 0 to +60 Degree
- Operating Speed (4.8V): 0.16sec/60° at no load
- Operating Speed (6V): 0.14sec/60° at no load
- Operating Speed (7.2V): 0.12sec/60° at no load
- Stall Torque:(4.8V): 3kg·cm ;(6.0V): 3.5kg·cm
- Dead Band Width: 10usecConnector Wire Length: 300mm
- Dimensions: 40.8mm X 20.1mm X 38mm
- Weight: 56g
- location of each pin: red (+),brown (-), yellow (signal)
Servo has three wires: Brown, Red and Orange. Brown is GND, Red is VCC, and should be connected to +5V, Orange is the control signal, which is PWM signal.
Note: Don't power your servo from USB port as USB port cannot provide enough current.
