Difference between revisions of "LinkSprite weather station"
(→Tutorial) |
(→Tutorial) |
||
| Line 48: | Line 48: | ||
Mount the SerLCD on the A panel | Mount the SerLCD on the A panel | ||
| + | |||
| + | |||
| + | [[File:LinkSprite weather station 008.png| 640px]] | ||
| + | |||
| + | |||
| + | [[File:LinkSprite weather station 009.png| 640px]] | ||
| + | |||
| + | |||
| + | [[File:LinkSprite weather station 010.png| 640px]] | ||
| + | |||
| + | |||
| + | |||
| + | Mount the button module on the E or F panel | ||
Revision as of 07:00, 27 June 2016
Introduction
LinkSprite weather station is one kind of LinkSprite IoT kit which is powered by ESP8266 WiFi SoC. This kit can automatically collect environmental data including temperature, humidity and pressure, and display them on the local LCD. At the same time, it would upload these data periodically to LinkSprite IoT cloud server. User can check them on the website or using APP. This also is an open source product and you can download the hardware and software from the website.
Features
- LinkNode D1
- Temperature & humidity sensor
- Pressure sensor
- RTC module
- 16x2 SerLCD
- Solar powered
- Automatically sync data to LinkSpriteIO
Tutorial
1. Hardware assembling
- There are 6 acrylic panels to build a case for weather station
- Mount the solar panel onto the D panel, connect solar panel and battery to power management module
- Use screws to mount the LinkNode D1 and T&M sensor module onto the B panel
- Use Blue-tack to paste the pressure sensor module and RTC module on B panel
Mount the SerLCD on the A panel
Mount the button module on the E or F panel
