Difference between revisions of "High Power Led Module"

From LinkSprite Playgound
Jump to: navigation, search
(Introduction)
 
(8 intermediate revisions by 2 users not shown)
Line 1: Line 1:
[[File:High power LED.jpg]]
+
==Introduction==
 +
This is a high power LED module. It has five bright LEDs.  
  
 +
[[File:High power LED module.jpg]]
 +
 +
== Specification ==
 +
 +
The high power led unit is 3528.
 +
 +
*Working Voltage: 3.0-3.4V
 +
 +
*Operating current: 20mA
 +
 +
== Features ==
 +
 +
Dimensions: 28.9×20.0×9.5mm
 +
 +
Net weight: 2.4g
 +
 +
== Dimension ==
 +
 +
[[File:High power led dimension1.jpg]]
  
 
== Schematics ==
 
== Schematics ==
 
*[https://s3.amazonaws.com/linksprite/LinkerKit/High+Power+LED.pdf Schematics]
 
*[https://s3.amazonaws.com/linksprite/LinkerKit/High+Power+LED.pdf Schematics]
 +
 +
==Application Ideas==
 +
 +
'''test'''
 +
<syntaxhighlight lang="c">
 +
/*
 +
  Linker High Power LED
 +
  the LED will turn on for 1s and then turn off for 1s, and so on.
 +
 +
  This example code is in the public domain.
 +
*/
 +
 +
int LEDControlPin = 12;
 +
void setup() {               
 +
  // initialize the digital pin as an output.
 +
 
 +
  pinMode(LEDControlPin, OUTPUT);   
 +
}
 +
 +
void loop() {
 +
  digitalWrite(LEDControlPin, HIGH);  // set the LED on
 +
  delay(1000);              // wait for a second
 +
  digitalWrite(LEDControlPin, LOW);    // set the LED off
 +
  delay(1000);              // wait for a second
 +
}
 +
</syntaxhighlight>
 +
 +
[[File:High Power LED link.jpg]]
 +
 +
==How to buy==
 +
Here to buy High Power Led Module on [http://store.linksprite.com/high-power-led-of-linker-kit-for-pcduino-arduino/ store]

Latest revision as of 08:02, 17 September 2014

Introduction

This is a high power LED module. It has five bright LEDs.

High power LED module.jpg

Specification

The high power led unit is 3528.

  • Working Voltage: 3.0-3.4V
  • Operating current: 20mA

Features

Dimensions: 28.9×20.0×9.5mm

Net weight: 2.4g

Dimension

High power led dimension1.jpg

Schematics

Application Ideas

test <syntaxhighlight lang="c"> /*

 Linker High Power LED
 the LED will turn on for 1s and then turn off for 1s, and so on.

 This example code is in the public domain.
*/

int LEDControlPin = 12; void setup() {

 // initialize the digital pin as an output.
 
 pinMode(LEDControlPin, OUTPUT);     

}

void loop() {

 digitalWrite(LEDControlPin, HIGH);   // set the LED on
 delay(1000);              // wait for a second
 digitalWrite(LEDControlPin, LOW);    // set the LED off
 delay(1000);              // wait for a second

} </syntaxhighlight>

High Power LED link.jpg

How to buy

Here to buy High Power Led Module on store