Difference between revisions of "High Power Led Module"
Qian.zhang (talk | contribs) (→Features) |
Qian.zhang (talk | contribs) (→Introduction) |
||
| (2 intermediate revisions by the same user not shown) | |||
| Line 3: | Line 3: | ||
[[File:High power LED module.jpg]] | [[File:High power LED module.jpg]] | ||
| + | |||
| + | == Specification == | ||
| + | |||
| + | The high power led unit is 3528. | ||
| + | |||
| + | *Working Voltage: 3.0-3.4V | ||
| + | |||
| + | *Operating current: 20mA | ||
== Features == | == Features == | ||
| − | Dimensions: | + | Dimensions: 28.9×20.0×9.5mm |
Net weight: 2.4g | Net weight: 2.4g | ||
| Line 12: | Line 20: | ||
== Dimension == | == Dimension == | ||
| − | [[File:High power led | + | [[File:High power led dimension1.jpg]] |
== Schematics == | == Schematics == | ||
Latest revision as of 08:02, 17 September 2014
Contents
Introduction
This is a high power LED module. It has five bright LEDs.
Specification
The high power led unit is 3528.
- Working Voltage: 3.0-3.4V
- Operating current: 20mA
Features
Dimensions: 28.9×20.0×9.5mm
Net weight: 2.4g
Dimension
Schematics
Application Ideas
test <syntaxhighlight lang="c"> /*
Linker High Power LED the LED will turn on for 1s and then turn off for 1s, and so on. This example code is in the public domain. */
int LEDControlPin = 12; void setup() {
// initialize the digital pin as an output. pinMode(LEDControlPin, OUTPUT);
}
void loop() {
digitalWrite(LEDControlPin, HIGH); // set the LED on delay(1000); // wait for a second digitalWrite(LEDControlPin, LOW); // set the LED off delay(1000); // wait for a second
} </syntaxhighlight>
How to buy
Here to buy High Power Led Module on store
