Difference between revisions of "Ambient Light Senor Breakout"
(Created page with "==Description== LinkSprite path tracking sensor uses a reflective infrared sensor (tcrt500). The infrared light is emitted and reflected back to the receiver, it's then inver...") |
|||
| Line 6: | Line 6: | ||
On a white surface, the output signal will be HIGH. On a black/non-reflective surface, the output signal will be low and the LED is off. The working distance from the sensor to the surface is around 1.5cm. | On a white surface, the output signal will be HIGH. On a black/non-reflective surface, the output signal will be low and the LED is off. The working distance from the sensor to the surface is around 1.5cm. | ||
| + | |||
| + | [[File:SD PATH TRACK 1.jpg | 400px]] | ||
Revision as of 03:40, 8 January 2014
Description
LinkSprite path tracking sensor uses a reflective infrared sensor (tcrt500). The infrared light is emitted and reflected back to the receiver, it's then inverted by 74LS14 and output to the output pin and the LED. The output signal is a digital signal.
There is 3 output pins: output signal, power supply and ground.
On a white surface, the output signal will be HIGH. On a black/non-reflective surface, the output signal will be low and the LED is off. The working distance from the sensor to the surface is around 1.5cm.
