Acrylic Frame Robot Platform

Introduction

Package List

• 1 × Acrylic Top Plate [IT_KIT_ACRYTOPPL]] [CA101102]
• 1 × Acrylic Bottom Plate [IT_KIT_ACRYBOTTPL] [CA101103]
• 1 × Acrylic Connecting Plate（5 holes） [IT_KIT_ACRY CONNPL5HO][CA101104]
• 1 × Acrylic Connecting Plate（6 holes） [IT_KIT_ACRY CONNPL6HO][CA101105]
• 2 × Motor [IT_MOTOR_DC3V_6V] [WH103101]
• 2 × Wheel [IT_TIRE_A] [WH101102]
• 10× Jumper Wires [IT_JUMR_MM_PK40_WI20CM][BB101104]
• 1 × Acrylic Web Cam Plate [IT_ACRY_WEDCAMPL] [CA101106]
• 1 × Battery Case [IT_BYPS_6_5][WH104101]
• 16× Screw 3mm*6 [IT_SCREW_6MM] [WB101102]
• 16× Screw 3mm*12 [IT_SCREW_12MM] [WB101103]
• 4 × Screw 3mm*25 [IT_SCREW_25MM] [WB101104]
• 1 × Ball Caster Metal [BOT_PT_OMNIDMETAL][104201008]
• 8 × Copper Pillar [IT_COPPCYL_6MM] [WA101102]
• 24× M3 Nut [IT_NUT_3M][WB101101]

Explanation of Acrylic Top Plate

Assembly Instructions

• Solder Jumper Wires on both DC Motors. Use 4 M3*25 screws to fix the DC motors on Acrylic Bottom Plate, note that the bump of DC motors should be aimed to the holes on Acrylic Bottom Plate.

• Use 2 M3*12 screws to fix Ball Caster Metal on Acrylic Bottom Plate.

• Use 2 M3*12 screws to fix Batter Case on Acrylic Bottom Plate.

• Use 2 M3*12 screws to fix Acrylic Connecting Plate(6 holes) on the left side(from top view, the battery case is at bottom) of Acrylic Bottom Plate, use another 2 M3*12 screws to fix Acrylic Connecting Plate(5 holes) on the other side.

• Use 4 M3*12 screws to fix Acrylic Top Plate on Acrylic Bottom Plate.