Difference between revisions of "1280x800 7" LVDS LCD with Capacitive Touch for pcDuino3"
Qian.zhang (talk | contribs) (→Usage) |
Qian.zhang (talk | contribs) (→Usage) |
||
Line 36: | Line 36: | ||
*Step 1: Update kernel | *Step 1: Update kernel | ||
1)Download the kernel of pcDuino3 :[http://cnlearn.linksprite.com/wp-content/uploads/2014/09/kernel.zip kernel.zip] | 1)Download the kernel of pcDuino3 :[http://cnlearn.linksprite.com/wp-content/uploads/2014/09/kernel.zip kernel.zip] | ||
+ | |||
2)Unzip the "kernel.zip",you will get a folder "kernel", then copy the folder to a USB flash disk. | 2)Unzip the "kernel.zip",you will get a folder "kernel", then copy the folder to a USB flash disk. | ||
− | + | ||
+ | 3)Plug the USB flash disk on your pcDuino3, and put in following command: | ||
$ sudo su | $ sudo su | ||
Line 43: | Line 45: | ||
# ls /mnt/ | # ls /mnt/ | ||
# rm /mnt/uImage /mnt/script.bin | # rm /mnt/uImage /mnt/script.bin | ||
− | # ls /media/ | + | # ls /media/ (This command is to check the name of your USB flash disk) |
− | # cp /media/40C3-AE90/kernel/* /mnt/ | + | # cp /media/40C3-AE90/kernel/* /mnt/ ("40C3-AE90" is the name of your USB flash disk) |
# sync | # sync | ||
+ | [[File:Start-input.jpg]] | ||
− | + | *Step 2: Add the driver of touch screen | |
− | + | 1)Download the driver of touch screen gslx680: [http://cnlearn.linksprite.com/wp-content/uploads/2014/09/gslx680.zip gslx680] | |
== Resources == | == Resources == | ||
*[http://learn.linksprite.com/pcduino/lvds-screen-for-pcduino/ Install lvds on pcDuino3] | *[http://learn.linksprite.com/pcduino/lvds-screen-for-pcduino/ Install lvds on pcDuino3] |
Revision as of 01:56, 9 January 2015
Introduction
This is a 7" LVDS LCD with capacitive touch for pcDuino3. It has a resolution of 1280x800.
Items Included:
- 1 x LVDS screen
- 1 x Driver board
- 3 x Ribbon cable
- 6 x Male to female jumper wires
Wire connection
We need to hook up the 6 pins headers using the male to female jumper wires in the following way:
- gnd of the LCD driver breakout board —> GND of pcDuino
- scl of the LCD driver breakout board —> SCL of pcDuino
- sda of the LCD driver breakout board –> SDA of pcDuino
- rst of the LCD driver breakout board –> D10 of pcDuino
- int of the LCD driver breakout board –> D9 of pcDuino
- wale of the LCD driver breakout board –> D8 of pcDuino
And make sure that the FPC ribbon is installed correctly.
Usage
- Step 1: Update kernel
1)Download the kernel of pcDuino3 :kernel.zip
2)Unzip the "kernel.zip",you will get a folder "kernel", then copy the folder to a USB flash disk.
3)Plug the USB flash disk on your pcDuino3, and put in following command:
$ sudo su
# mount /dev/nanda /mnt/ # ls /mnt/ # rm /mnt/uImage /mnt/script.bin # ls /media/ (This command is to check the name of your USB flash disk) # cp /media/40C3-AE90/kernel/* /mnt/ ("40C3-AE90" is the name of your USB flash disk) # sync
- Step 2: Add the driver of touch screen
1)Download the driver of touch screen gslx680: gslx680