Difference between revisions of "USB LiPoly Charger - Single Cell"
Katherine.d (talk | contribs) (Created page with "== Description == If you need to charge LiPo batteries, this simple charger will do just that, and do it fast! The USB LiPo Charger is a basic charging circuit that allows you...") |
Katherine.d (talk | contribs) (→Description) |
||
| Line 6: | Line 6: | ||
There is also a 'SYS OUT' which allows you to connect the charging circuit directly to your project so you don't need to disconnect the charger each time you want to use it. | There is also a 'SYS OUT' which allows you to connect the charging circuit directly to your project so you don't need to disconnect the charger each time you want to use it. | ||
| − | [[File:USBcharge.jpg]] | + | [[File:USBcharge.jpg | 400px]] |
== Schematic == | == Schematic == | ||
[https://s3.amazonaws.com/linksprite/breakout/usb_li_charge/schematic.pdf schematic of USB Lipoly charger in pdf] | [https://s3.amazonaws.com/linksprite/breakout/usb_li_charge/schematic.pdf schematic of USB Lipoly charger in pdf] | ||
Latest revision as of 06:24, 21 February 2013
Description
If you need to charge LiPo batteries, this simple charger will do just that, and do it fast! The USB LiPo Charger is a basic charging circuit that allows you to charge 3.7V LiPo cells at a rate of 500mA or 100mA per hour. It is designed to charge single-cell Li-Ion or Li-Polymer batteries. Check the datasheet below to see if it will work with your battery.
The board incorporates a charging circuit, status LED, selectable solder jumper for 500mA or 100mA charging current, external LED footprint, USB input, mounting holes, and various holes for your own connectors.
There is also a 'SYS OUT' which allows you to connect the charging circuit directly to your project so you don't need to disconnect the charger each time you want to use it.
