Difference between revisions of "Advanced Learning Kit for Arduino"
| Line 320: | Line 320: | ||
</td></tr> | </td></tr> | ||
| + | ==Resources== | ||
| + | *[http://learn.linksprite.com/?cat=10 Tutorials] | ||
Revision as of 02:32, 15 January 2014
This is an advanced learning kit for Arduino that including the following items:
Resources
| Item Number | Name | Quantity | Description |
|---|---|---|---|
| 1 | Plastic Box | 1 | Container for components |
| 2 | Arduino Uno R3 | 0 | This is chosen to be not included. |
| 3 | USB cable | 1 | |
| 4 | Breadboard | 1 | |
| 5 | Mini Breadboard | 1 | |
| 6 | Plastic sheet | 1 | Used to fix the Arduino and breadboard |
| 7 | Spacer and Nut | 1 | Used with the plastic sheet |
| 8 | Hard Jumper wire | 1 box | Both ends are male. |
| 9 | Tweezers | 1 box | Used to hard jumper wire |
| 10 | Jumper wire | 20 | Both ends are male |
| 11 | Jumper wire | 10 | One end is male, and the other end is female |
| 12 | 9V battery | 1 | DC to barrel is included |
| 13 | LED | 9 | Three each of R/G/B. |
| 14 | Resistor | 10 | 220 ohm |
| 15 | Resistor | 10 | 1k ohm |
| 16 | Resistor | 10 | 10k ohm |
| 17 | Potentiometer | 1 | WXD3-13-2W |
| 18 | Potentiometer | 1 | WXD3-13-2W |
| 19 | Button | 5 | |
| 20 | Buzzer | 2 | |
| 21 | Infrared Receiver | 1 | HS0038 |
| 22 | Remote Control | 1 | |
| 23 | LDR | 1 | |
| 24 | Temperature Sensor | 1 | LM35 |
| 25 | RGB LED | 1 | |
| 26 | 16x02 LCD | 1 | |
| 27 | Flame Sensor | 1 | |
| 28 | Buzzer | 1 | |
| 29 | 7-seg LED | 1 | 4-digit command-anode |
| 30 | RC Servo | 1 | SG09 |
| 31 | LED matrix | 1 | Dual 8x8 LED matrix |
| 32 | Reed switch | 1 | |
| 33 | Magnetic Ball | 1 | |
| 34 | Tilt Switch | 1 | SW-520D |
| 35 | Relay Module | 1 | |
| 36 | Ultrasonic Module | 1 | SRF04 |
| 37 | Humidity and temperature sensor | 1 | DHT11 |
| 38 | Step motor | 1 | |
| 39 | Step motor driver | 1 | |
| 40 | DC motor | 1 | |
| 41 | Fixture for DC motor | 1 | |
| 42 | Fan Blade | 1 |
