Difference between revisions of "Advanced Sensors Kit for Arduino"
Line 210: | Line 210: | ||
| [[File:ky027.jpg | 300px]] | | [[File:ky027.jpg | 300px]] | ||
| | | | ||
+ | This module has two parts - an LED and a mercury tilt switch. Pins are 1 G (ground), 2 + (5V power), 3 S signal and 4 L (LED.) | ||
+ | If you wired up 1 & 2 to power, pin 3 (signal) will alternate between 5V (HIGH) and 0V (LOW) as you tilt the module. If you connect a current limiting resistor to L2, you can use it as a blinking LED. | ||
*[https://s3.amazonaws.com/linksprite/Arduino_kits/advanced_sensors_kit/KY027+code.pdf Arduino Sample Code] | *[https://s3.amazonaws.com/linksprite/Arduino_kits/advanced_sensors_kit/KY027+code.pdf Arduino Sample Code] | ||
|- | |- |
Revision as of 22:17, 9 July 2014
Item | Picture | Description |
---|---|---|
KY001:
Temperature Sensor Module |
This module measures the temperature and reports it through the 1-wire bus digitally to the Arduino. | |
KY002:
Shock Sensor Module |
This module is digital shock sensor. It will output a high level signal when it detects a shock event. | |
KY003:
Hall Magnetic Field Sensor Module |
This module can be used to detect the presence of an magnetic field. If there is an magnetic field present, it will report a high level signal. | |
KY004:
Momentary Button Module |
This is a button module. When the button is pressed, it will a high level signal. | |
KY005:
Infrared Transmitter Module |
This is an infrared transmitter module that is used to emit infrared signal. | |
KY006:
Buzzer Module |
This is an active buzzer module that can make different sound. | |
KY008:
Laser Diode Module |
This is a laser emitter diode. The working voltage is 5V, with a wavelength of 650nm. | |
KY009:
RGB three colors LEDs module |
This is a surface mount three-color LED module that can make any color we want by combing different intensities of Red, Blue and Green. | |
KY010:
Light Block Sensor Module |
This is a light block sensor module, where there is an object in the middle of the U shape. The sensor will output a high level signal. | |
KY011:
Dual Light LEDs module |
This is a dual color LED module. | |
KY012:
Buzzer Module |
This is a nonactive buzzer module. | |
KY013:
Analog Temperature Sensor |
This is an analog temperature sensor that outputs it voltage in proportional to the temperature. | |
KY015:
Temprature and Humidity Sensor |
This DHT11 Temperature and Humidity Sensor features a calibrated digital signal output with the temperature and humidity sensor complex,ensureing the high reliability and excellent long-term stability. A high-performance 8-bit microcontroller is connected. This sensor includes a resistive element and a sense of wet NTC temperature measuring devices. It has excellent quality, fast response, anti-interference ability and high cost performance advantages. | |
KY016:
RGB three colors LED module |
This is a through the hole three-color LED module that can make any color we want by combing different intensities of Red, Blue and Green. | |
KY017:
Quicksilver Switch Module |
A tilt switch that can turn on and off depending on the tilt position. The switch is mercury. | |
KY018:
Optosensor Module |
Photoresistors are semiconductor photosensitive devices, in addition to having high sensitivity, fast response, consistent with the spectral characteristics and value of good features Under a high temperature, and humidity in harsh environments, it also can maintain a high degree of stability and reliability Wide pan used cameras, solar garden lights, lawn, detectors, clock, music, cups, gift boxes, mini-night light, light voice switches, lights automatically switch toys and a variety of light control, light control lighting, lamps and other light automatic opening control field | |
KY019:
5V DC Relay Module |
This is 1 channel relay module with the following spec:
| |
KY020:
Tilt Switch Module |
Tilt switch module and a digital interface, built-in 13 LED build a simple circuit to produce tilt warning lamp 13 comes with digital interfaces of the LED, the tilt switch sensor interface to access digital 3,when the tilt open Off sensor senses a key signal, LED lights, otherwise off. | |
KY021:
Mini Reed Switch Module |
Reed module and the interface comes with digital 13 LED build a simple circuit to produce a Reed warning lamp 13 comes with digital interfaces of the LED, the Reed sensor access number 3 interface, when Reed sensors Sensed a key signal, LED lights, otherwise off. | |
KY022:
Infrared Receiver Module |
This is the infrared receiver module, with the following features:
| |
KY023:
Mini Dual Axis JoyStick |
On the principle, the control rod can be considered that it is organized by the two potentiometer and a button.When using, it can connect with Arduino sensor shield,and connect Arduino corresponding pins through Arduino sensor cables. It as the following spec:
| |
KY024:
Linear magnetic Hall sensor |
Linear Hall magnetic module and a digital interface, built-in 13 LED build a simple circuit to produce a magnetic field warning lamp 13 comes with digital interfaces of the LED, the linear Hall sensor magnetometer access number 3 interface, when linear Hall magnetometer Sensor senses a key signal, LED lights, otherwise off. | |
KY025:
Big Reed Switch Module |
Reed module and the interface comes with digital 13 LED build a simple circuit to produce a Reed warning lamp 13 comes with digital interfaces of the LED, the Reed sensor access number 3 interface, when Reed sensors Sensed a key signal, LED lights, otherwise off. | |
KY026:
Flame Sensor Module |
Sensor for flame wavelengths between 760 nm to 1100 nm infrared is most sensitive
| |
KY027:
Magic LED cup Module |
This module has two parts - an LED and a mercury tilt switch. Pins are 1 G (ground), 2 + (5V power), 3 S signal and 4 L (LED.) If you wired up 1 & 2 to power, pin 3 (signal) will alternate between 5V (HIGH) and 0V (LOW) as you tilt the module. If you connect a current limiting resistor to L2, you can use it as a blinking LED. | |
KY028:
Digital Temprateure Sensor Module |
||
KY031:
Shock Sensor Module |
||
KY032:
Obstacle Sensor Module |
||
KY033:
Line follow Sensor Module |
||
KY034:
7 Colors LED Blinking Module |
||
KY035:
Hall Sensor Module |
||
KY036:
Metal Touch Sensor Module |
||
KY037:
High Sensitive Microphone Module |
||
KY038:
Microphone Module |
||
KY039:
Heatbeat Sensor Module |
||
KY040:
Rotation Encoder Module |