Difference between revisions of "PcDuino3Core Evaluation Board"

From LinkSprite Playgound
Jump to: navigation, search
(Resources)
(Introduction)
Line 1: Line 1:
 
== Introduction ==
 
== Introduction ==
  
This board is used to evaluate the pcDuino3Core. It places all the interface of pcDuino3Core. It has the female socket to install pcDuino3Core on it.
+
This is an standard evalutation board that allows the user to evaluate the pcDuino3 core board. The configuration of this evaulation board coded 'A' is excatly same as pcDuino3, which is a 100Mbps MAC. All the firmware for pcDuino3 works for evaulation board A, and so are the firmware flashing methods.
 +
 +
If you are thinking to have a different base board to go producation with pcDuino3c core board, and have done prototype with pcDuino3. Please contact pcduino@linksprite.com to custome make one baseboard for you.
  
 
[[File:3c_di.jpg]]
 
[[File:3c_di.jpg]]

Revision as of 01:21, 11 January 2015

Introduction

This is an standard evalutation board that allows the user to evaluate the pcDuino3 core board. The configuration of this evaulation board coded 'A' is excatly same as pcDuino3, which is a 100Mbps MAC. All the firmware for pcDuino3 works for evaulation board A, and so are the firmware flashing methods.

If you are thinking to have a different base board to go producation with pcDuino3c core board, and have done prototype with pcDuino3. Please contact pcduino@linksprite.com to custome make one baseboard for you.

3c di.jpg

3c di1.jpg

Usage

Plug the pcDuino3Core on the evaluation board:

3c on.jpg

Resources