Linux设备驱动开发套件

套件介绍

该套件是包含《Linux驱动开发详解：基于最新的Linux4.0内核》一书在内的全套实践平台。套件为读者提供了完整的linux4.0镜像文件和本书的配套工程文件。读者在阅读本书的同时，可以结合pcDuino3nano硬件平台相结合，边学习，边实践。本书适合宋宝华老师以下三门课程：

• 1.Linux内核与驱动深入剖析与编程
• 2.Linux系统编程与调试调优
• 3.ARM处理器以及Linux在ARM的实现原理

pcDuino3硬件规格

pcDuino3nano硬件规格

套件清单

• 《Linux驱动开发详解：基于最新的Linux4.0内核》1本
• pcDuino3nano 1个
• SD卡1个
• USB Micro数据线1条
• USB 串口线1条
• 交叉网线1条

Tutorial

Pre-requisites

• 1. 8G (or bigger) TF card( Speed class is recommended for Class 6 or higher)
• 2. TF card reader
• 3. for pcDuino3 nano
• 4. Windows tool: Win32DiskImager
• 5. Windows tool: Xshell

Create

Plug TF Card Reader into Windows PC and open Win32DiskImager as administrator.

• Select the Image File that you unzip from the downloaded File
• Select the Device that the PC recognized
• Click the write button.
• It will say Write Successful at the end.

Run

*Plug the TF card into pcDuino3 nano *Connect 5V DC power input via Micro USB port *Connect TTL port and USB to TTL *Open Xshell select serial and right COM Baud rate is 115200 *Power on and run

Network test

• Enter the login user "root"
• Input "sudo ping www.baidu.com"

If you see the above message, network is ok.

Note: For the first time boot, system initialization may take some time (about 2-3 minutes ), and USB port is disabled. Please do not shutdown before system restart. The image of pcDuino 3 nano:https://s3.amazonaws.com/linksprite/pcduino/pcduino3-nano-4.4.0-ready-image.img