RB-65CS: Servo with 360 Degree freedom

Specifications:

• Control System: +Pulse Width Control 1500usec Neutral
• Operating Voltage: 4.8-6.0 Volts
• Operating Temperature Range: 0 to +60 Degree
• Operating Speed (4.8V): 0.14sec/60° at no load
• Operating Speed (6.0V): 0.12sec/60° at no load
• Stall Torque:(4.8V): 6kg·cm ;(6.0V): 6.5kg·cm
• Dead Band Width: 10usec
• Connector Wire Length: 300mm
• Dimensions: 40.8mm X 20.1mm X 38mm
• Weight: 40g
• Location of each pin: red (+),brown (-), yellow (signal)

Servo has three wires: Brown, Red and Orange. Brown is GND, Red is VCC, and should be connected to +5V, Orange is the control signal, which is PWM signal.

Note: Don't power your servo from USB port as USB port cannot provide enough current.

---