Battery for Robot 4800mAH Europe Edition

From LinkSprite Playgound
Revision as of 10:13, 17 October 2014 by Qian.zhang (talk | contribs) (Specification)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Introduction

This is a battery pack for robot application. This edition contains an Europe wall adpter.

Rover batt europe.jpg

Specification

Battery:

  • Input: 12.6VDC
  • Output: 12VDC, 4800mAH
  • Charger:
  • Input: 110-240VAC 50/60Hz
  • Output: 12.6DC, 350mA

Hardware Included:

  • Wall adapter charger
  • Rechargeable Li-on battrery

Usage

There is a switch on the battery pack. Please turn the switch to the ON position during charging and discharging.

ROVER BATT 3.jpg

On the switch, there is a LED there to indicate the charging.

A charger is included to charge the battery. To charge the battery, the connection is as following:

ROVER BATT connection.jpg

When applying AC power to wall adapter, the red LED will turn on. The green LED will turn on when charging battery.

ROVER BATT 4.jpg