LinkNode Base Shield for LinkNode D1

From LinkSprite Playgound
Revision as of 02:09, 20 April 2017 by Alvin (talk | contribs) (Introduction)
Jump to: navigation, search

Introduction

LinkNode base shield is designed for the connection of LinkNode series sensors to LinkNode D1. It provides 2.00 mm contact pitch header instead of 2.54 mm. We will launch various LinkNode series sensors in near future.

D1 V2.0 A.png

D1 V2.0 B.png

D1 V2.0 C.png

Feature

  • GPIO x 7
  • I2C x 4
  • SPI x 1
  • Uart x 1