Introductory Kit with Clear Case for Arduino
Revision as of 08:51, 22 April 2013 by Katherine.d (talk | contribs)
Description:
The following experiments can be done using this kit:
- Blinking LED
- Buzzer
- Button
- Serial port
- PWM controls LED
- Morse SOS
- Morse translation
- 7 LED segment display
- traffic light
- Analog input
- LED flash light, Potentiometer controls frequency
- Tilt experiment
- Digital LEDs
- Light sensor
The components are stored in a clear case:
The kit includes the following components:
| Name | Value | Quantity |
|---|---|---|
| 9V Wall Adapter | 1 | |
| USB Cable | Type A | 1 |
| Male to Male Jump Wire | 40 | |
| Through hole resistors | 100K ohm | 20 |
| Through hole resistors | 470 ohm | 20 |
| Through hole resistors | 1k ohm | 20 |
| Through hole resistors | 10k ohm | 20 |
| Potentiometer With Big knob | 10k ohm | 1 |
| Mini Potentiometer | 10k ohm | 1 |
| LED 5mm | Blue | 4 |
| LED 5mm | Green | 4 |
| LED 5mm | Yellow | 4 |
| LED 5mm | White | 4 |
| LED 5mm | Red | 4 |
| Three digits 7-seg LEDs | 1 | |
| Transistor | 8050 | 2 |
| Transistor | 8550 | 2 |
| Buzzer | 2 | |
| Mini Breadboard | 2 |
