Advanced Sensors Kit for Arduino

Item	Picture	Description
KY001: Temperature Sensor Module		This module measures the temperature and reports it through the 1-wire bus digitally to the Arduino. DS18B20 Arduino Sample Code
KY002: Shock Sensor Module		This module is digital shock sensor. It will output a high level signal when it detects a shock event. Arduino Sample Code
KY003: Hall Magnetic Field Sensor Module		This module can be used to detect the presence of an magnetic field. If there is an magnetic field present, it will report a high level signal. Arduino Sample Code
KY004: Momentary Button Module		This is a button module. When the button is pressed, it will a high level signal. Arduino Sample Code
KY005: Infrared Transmitter Module		This is an infrared transmitter module that is used to emit infrared signal. Arduino Sample Code
KY006: Buzzer Module		This is an active buzzer module that can make different sound. Arduino Sample Code
KY008: Laser Diode Module		This is a laser emitter diode. The working voltage is 5V, with a wavelength of 650nm. Arduino Sample Code
KY009: RGB three colors LEDs module		This is a surface mount three-color LED module that can make any color we want by combing different intensities of Red, Blue and Green. Arduino Sample Code
KY010: Light Block Sensor Module		This is a light block sensor module, where there is an object in the middle of the U shape. The sensor will output a high level signal. Arduino Sample Code
KY011: Dual Light LEDs module		This is a dual color LED module. Arduino Sample Code
KY012: Buzzer Module		This is a nonactive buzzer module. Arduino Sample Code
KY013: Analog Temperature Sensor		This is an analog temperature sensor that outputs it voltage in proportional to the temperature. Arduino Sample Code
KY015: Temprature and Humidity Sensor		This DHT11 Temperature and Humidity Sensor features a calibrated digital signal output with the temperature and humidity sensor complex,ensureing the high reliability and excellent long-term stability. A high-performance 8-bit microcontroller is connected. This sensor includes a resistive element and a sense of wet NTC temperature measuring devices. It has excellent quality, fast response, anti-interference ability and high cost performance advantages. Arduino Sample Code
KY016: RGB three colors LED module		This is a through the hole three-color LED module that can make any color we want by combing different intensities of Red, Blue and Green. Arduino Sample Code
KY017: Quicksilver Switch Module		A tilt switch that can turn on and off depending on the tilt position. The switch is mercury. Arduino Sample Code
KY018: Optosensor Module		Photoresistors are semiconductor photosensitive devices, in addition to having high sensitivity, fast response, consistent with the spectral characteristics and value of good features Under a high temperature, and humidity in harsh environments, it also can maintain a high degree of stability and reliability Wide pan used cameras, solar garden lights, lawn, detectors, clock, music, cups, gift boxes, mini-night light, light voice switches, lights automatically switch toys and a variety of light control, light control lighting, lamps and other light automatic opening control field Arduino Sample Code
KY019: 5V DC Relay Module		This is 1 channel relay module with the following spec: Can be used as microcontroller development board module can be used as home appliance control 5 V-12V to TTL control signal The control signal DC or AC, 220V AC load can be controlled. There is a normally open and one normally closed contact A power indicator light A control indicator, pull off, disconnect does not shine Aransistor drive to increase the relay coil control pins high impedance. A control pin has a pull-down circuit to prevent malfunction relay vacant Arduino Sample Code
KY020: Tilt Switch Module		Tilt switch module and a digital interface, built-in 13 LED build a simple circuit to produce tilt warning lamp 13 comes with digital interfaces of the LED, the tilt switch sensor interface to access digital 3,when the tilt open Off sensor senses a key signal, LED lights, otherwise off. Arduino Sample Code
KY021: Mini Reed Switch Module		Reed module and the interface comes with digital 13 LED build a simple circuit to produce a Reed warning lamp 13 comes with digital interfaces of the LED, the Reed sensor access number 3 interface, when Reed sensors Sensed a key signal, LED lights, otherwise off. Arduino Sample Code
KY022: Infrared Receiver Module		This is the infrared receiver module, with the following features: The infrared receiver module is 1838 Infrared receiver Acceptance angle: 90 °, Operating voltage: 7-5.5V. Frequency: 37.9KHZ, Receiving distance: 18Meter. Using inside and outside the double-shielded package structure Anti-light, electromagnetic interference capability, built-in infrared dedicated IC Can in 500 LUX Light intensity to work properly. Widely used in: stereo, TV, VCR, disc players, set-top boxes, digital photo frame, car audio, remote control toys, satellite receiver, hard disk player, air conditioners, heaters, fans, lighting and other household appliances. Arduino Sample Code
KY023: Mini Dual Axis JoyStick		On the principle, the control rod can be considered that it is organized by the two potentiometer and a button.When using, it can connect with Arduino sensor shield,and connect Arduino corresponding pins through Arduino sensor cables. It as the following spec: Directional movements are simply two potentiometers - one for each axis Compatible with Arduino interface The biaxial XY Joystick Module KY-023 applies ARDUINO Dimensions: 1.57 in x 1.02 in x 1.26 in (4.0 cm x 2.6 cm x 3.2 cm) 5 Pin Arduino Sample Code
KY024: Linear magnetic Hall sensor		Linear Hall magnetic module and a digital interface, built-in 13 LED build a simple circuit to produce a magnetic field warning lamp 13 comes with digital interfaces of the LED, the linear Hall sensor magnetometer access number 3 interface, when linear Hall magnetometer Sensor senses a key signal, LED lights, otherwise off. Arduino Sample Code
KY025: Big Reed Switch Module		Reed module and the interface comes with digital 13 LED build a simple circuit to produce a Reed warning lamp 13 comes with digital interfaces of the LED, the Reed sensor access number 3 interface, when Reed sensors Sensed a key signal, LED lights, otherwise off. Arduino Sample Code
KY026: Flame Sensor Module		Sensor for flame wavelengths between 760 nm to 1100 nm infrared is most sensitive 60 degree detection sensor Two outputs mode: AO: analog output- real-time output voltage signal on the thermal resistance DO: when the temperature reaches a certain threshold- the output high and low signal threshold adjustable via potentiometer Working voltage: DC 3V - 5.5V Arduino Sample Code
KY027: Magic LED cup Module		This module has two parts - an LED and a mercury tilt switch. Pins are 1 G (ground), 2 + (5V power), 3 S signal and 4 L (LED.) If you wired up 1 & 2 to power, pin 3 (signal) will alternate between 5V (HIGH) and 0V (LOW) as you tilt the module. If you connect a current limiting resistor to L2, you can use it as a blinking LED. Arduino Sample Code
KY028: Digital Temprateure Sensor Module		Arduino Sample Code
KY031: Shock Sensor Module		Arduino Sample Code
KY032: Obstacle Sensor Module		Arduino Sample Code
KY033: Line follow Sensor Module		Arduino Sample Code
KY034: 7 Colors LED Blinking Module		Arduino Sample Code
KY035: Hall Sensor Module		Arduino Sample Code
KY036: Metal Touch Sensor Module		Arduino Sample Code
KY037: High Sensitive Microphone Module		Arduino Sample Code
KY038: Microphone Module		Arduino Sample Code
KY039: Heatbeat Sensor Module		Arduino Sample Code
KY040: Rotation Encoder Module		Arduino Sample Code