2.5W Laser Head for DIY CNC 3 Axis Engraver Machine
Introduction
This is a 2.5W Laser Head for DIY CNC 3 Axis Engraver Machine PCB Milling Wood Carving Router Kit Arduino Grbl. The parameter is 2500MW / 2.5W.
Specification
- Power: 2500 mw / 2.5 W
- Wave length: 445 nm to 450 nm
- Light color: blue
- Adjustable focus: yes, < 0.5 mm
- The input voltage: DC12V
- Dc socket: 5.5 2.1 (inside' + ',outside '-')
- Power supply: > 1.5 A
- TTL: yes, low level (0 v) : OFF, high level (5 v) : ON.
- Frequency: 0-20 KHZ
- Cooling mode: radiator and a cooling fan
- Material: aluminum alloy
- Lens: the glass
- Size: 90 * 40 * 40 mm (laser module)
Feature
- adjustable focal length (by finger), the minimum point < 0.5 mm;
- can be carved wooden
- can be used for laser cutting machine, laser engraving machine, CNC, laser DIY;
- it can burn plastic, paper, balloons, cigarettes, wood, etc.;
- pointer distance > 5000 m;
- can work continuously > 12 hours
- working life: > 50000 hours
