Laser Head for DIY CNC 3 Axis Engraver Machine

From LinkSprite Playgound
Revision as of 02:37, 12 January 2017 by Alvin (talk | contribs)
Jump to: navigation, search

Introduction

This is a Laser Head for DIY CNC 3 Axis Engraver Machine PCB Milling Wood Carving Router Kit Arduino Grbl.

The wavelength of this laser is 405nm.

The parameter is 12V 500mw.

Laser Head (1).jpg

Laser Head (5).jpg

Specification

LaserCNC.png

User Agreement

  • The power of laser module is relatively high, only for industrial use. Lighting directly to eyes is forbidden which will hurt the eyes.
  • It is prohibited to use in the place where there are inflammable materials and gas, or it could cause fires and explosions.
  • Children are prohibited from contacting with the laser product.
  • Do not open the case of this module or it could be damaged.
Retrieved from "https://wiki.linksprite.com/index.php?title=Laser_Head_for_DIY_CNC_3_Axis_Engraver_Machine&oldid=11772"