LinNode Base Shield for LinkNode D1

From LinkSprite Playgound
Revision as of 08:11, 1 April 2017 by Alvin (talk | contribs) (Created page with "== Introduction == LinkNode base shield for LinkNode D1 is designed for the connection of LinkNode series sensors to LinkNode D1. We use 2.00mm interface instead of 2.54mm whi...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Introduction

LinkNode base shield for LinkNode D1 is designed for the connection of LinkNode series sensors to LinkNode D1. We use 2.00mm interface instead of 2.54mm which used before.

D1 V2.0 A.png

D1 V2.0 B.png

D1 V2.0 C.png

Feature

  • GPIO x 7
  • I2C x 4
  • SPI x 1
  • Uart x 1
Retrieved from "https://wiki.linksprite.com/index.php?title=LinNode_Base_Shield_for_LinkNode_D1&oldid=12114"