RB-65CS: Servo with 360 Degree freedom

From LinkSprite Playgound
Revision as of 07:19, 12 November 2012 by Nancy (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

RB 65CS 1.jpg

Specifications

  • Control System: +Pulse Width Control 1500usec Neutral
  • Operating Voltage: 4.8-6.0 Volts
  • Operating Temperature Range: 0 to +60 Degree
  • Operating Speed (4.8V): 0.14sec/60° at no load
  • Operating Speed (6.0V): 0.12sec/60° at no load
  • Stall Torque:(4.8V): 6kg·cm ;(6.0V): 6.5kg·cm
  • Dead Band Width: 10usec
  • Connector Wire Length: 300mm
  • Dimensions: 40.8mm X 20.1mm X 38mm
  • Weight: 40g
  • Location of each pin: red (+),brown (-), yellow (signal)

Servo has three wires: Brown, Red and Orange. Brown is GND, Red is VCC, and should be connected to +5V, Orange is the control signal, which is PWM signal.

Note: Don't power your servo from USB port as USB port cannot provide enough current.


RB 65CS 2.JPG

Retrieved from "https://wiki.linksprite.com/index.php?title=RB-65CS:_Servo_with_360_Degree_freedom&oldid=161"