Papilio Pro

Test Plan of Papilio Pro

Testing Prerequisites (What you need)

• Terminal Application - Hyperterminal is used in this guide but any terminal program can be used. In our case, we use X-CTU.
• Stimulus Board: We use a Papilio One 250K with Male headers soldered on facing downwards.

Testing Procedure

Prepare the stimulus board

• If this is the first time a Papilio board is being used on your computer then install the Papilio Loader and Drivers.
• Download the latest version of the Gadget Factory Test Plan package.
• Prepare the stimulus board with the stimulus bit file.
  • Navigate to the directory where the Gadget Factory Test Plan is unzipped to and enter the "Papilio_Pro_Verification" folder.
  • Connect the Stimulus board to the USB port.
  • Run "Prepare_Stimulus_Board.bat" file. You can run this file by double clicking it.
  • Verify the results: