Spruce

Introduction

Spruce -LinkSprite STM32 ARM cortex board can be used with OpenJTAG and is compatible withmini ARM cortex-M3 board . It can be used in GCC+Eclipse+openocd+openJtag and Arduino enviroment! When used in Arduino enviroment, it is compatible with Maple.

Spruce has Arduino compatible shield pins, all the Arduino shields can be used on LinkSprite STM32 cortex board. Arduino similar IDE can be used to download Arduino code to Spruce board.

Spruce Hardware Resource

• CPU: STM32F103VET6, TQFP 100 pins FLASH:512K BYTES, SRAM:64KBYTES
• 1 JTAG debug interface
• 1 power LED indicattor (Green), 1 status LED (Blue)
• 1 RS232 port, Need crossover cable to talk to PC
• Support 3 pin ISP
• 1 USB2.0 SLAVE port
• 1 Micro SD(TF) slot, uses SDIO
• 1 SPI interfaced AT45DB161D(2M BYTES) serial FLASH
• 1 functional botton
• 1 RTC battery socket
• 1 RJ45 Ethernet port
• All unused GPIO pins are connected to external headers.
• LCD NOT INCLUDED

Arduino IDE Environment

In Arduino IDE enviroment, it is fully compatible with maple, and all arduino shield. The bootloader is flashed through RS232 port, and the arduino program is downloaded frm USB port. The driver of the USB port can be found at the maple IDE, which can be downloaded from the maple IDE version for Spruce.

GCC+Eclipse+OpenOCD+OpenJTAG

Spruce also supports development using GCC+Eclipse+OpenOCD+OpenJTAG.

Eclipse Enviroment Setup and User Guide

Eclipse is a Java development enviroment, but its architecture also supports other languages. In this article we will introduce how to use C/C++ development Toolkit CDT) together with Sourcery G++ Lite for ARM EABI to do embedded ARM development work,

We need to install JAVA JDK before install Eclipse. The JAVA JDK can be downloaded from:download

After registration, we can download jdk-6u22-windows-i586.exe and install.

Download Eclipse IDE for C/C++ Developers, it has Eclipse and CDT. The download link is: Eclipse IDS

Select Eclipse IDE for C/C++ Developers,

After download, unzip eclipse and run Eclipse.

Install ARM plug-in for Eclipse:

In menu, select Help – > Install New Software, and enter:

http://gnuarmeclipse.sourceforge.net/updates

in the "work with" address bar:

FAQ

Please list your question here:

Support

If you have questions or other better design ideas, you can go to our forum to discuss or creat a ticket for your issue at linksprite support.

See Also

Other related products and resources.

Licensing

This documentation is licensed under the Creative Commons Attribution-ShareAlike License 3.0 Source code and libraries are licensed under GPL/LGPL, see source code files for details.