GPS Shield With SD Card Slot for Arduino V2.0 A
Contents
Introduction
This GPS shield is designed for Arduino Uno. This shield integrates SR-92 GPS module and a SD card slot. As the SR-92 module and SD works with 3.3V, a 3.3V power supply module is embedded to the shield. This shield can work independently from Arduino, and you can use the PC to receive the data from the board. User can use a serial terminal in PC to read the SR-92 data and read/write to the SD card.
Model:SOLID_GPS_SD_SHIELD
Features
- With Micro SD interface
- Active antenna design with high receive sensitivity, compatible normal antenna
- Extremely fast time to first fix at low signal level
- UART interface
- Operation temperature: -40℃ ~ +85℃
Application Ideas
Cautions
The warnings and wrong operations possible cause dangerous.
Schematic
GPS Shield with SD Card Slot for Arduino V2.0 Schematic in PDF
Specification
| PCB | 55.88mm X 54.1mm X 1.6mm |
| Indicators | PWR |
| Power Supply | compatible with Arduino |
| Communication Protocol | UART |
| RoHS | Yes |
Pin definition and Rating
| Arduino PIN | Description |
|---|---|
| D0 | Data |
| D1 | Din |
| D2 | - |
| D3 | - |
| D4 | - |
| D5 | - |
| D6 | - |
| D7 | - |
| D8 | - |
| D9 | - |
| D10 | CSN |
| D11 | MOSI |
| D12 | MISO |
| D13 | SCK |
| A0 | BREAKOUT |
| A1 | BREAKOUT |
| A2 | BREAKOUT |
| A3 | BREAKOUT |
| A4 | IIC_SDA |
| A5 | IIC_SCL |
Mechanic Dimensions
Usage
Hardware Installation
Programming
FAQ
Please list your question here:
Support
If you have questions or other better design ideas, you can go to our forum to discuss or creat a ticket for your issue at linksprite support.
Resources
How to buy
See Also
Other related products and resources.
Licensing
This documentation is licensed under the Creative Commons Attribution-ShareAlike License 3.0 Source code and libraries are licensed under GPL/LGPL, see source code files for details.
