Linker kit Base Shield for Raspberry Pi with ADC Interface

From LinkSprite Playgound
Revision as of 16:06, 29 July 2013 by Jingfeng (talk | contribs)
Jump to: navigation, search

Description

This is a Linker kit base shield for Raspberry Pi with ADC interface. All the Linker kit modules can be plugged onto Raspberry Pi through this base shield. Moreover, this shield has an on-board ADC chip so that analog output modules can be used on Raspberry Pi. The ADC chip used is MCP3004. It talks to Raspberry Pi using SPI interface.

P24-1.jpg


Specification

There are 8 4-pin 2.54mm spacing housing on the base shield:

  • JP1: A0, A1, VCC, GND.
  • JP2: A2, A3, VCC, GND.
  • JP3: SCL, SDA, VCC, GND.
  • JP4: RXD, TXD, VCC, GND.
  • JP5: P17, P18, VCC, GND.
  • JP6: P27, P22, VCC, GND.
  • JP7: P23, P24, VCC, GND.
  • JP8: P24, P4, VCC, GND.

These connectors cover Analog, I2C, and GPIO.

Install Base Shield on Raspberry Pi

P24-3.jpg

Schematics

Tutorial

Retrieved from "https://wiki.linksprite.com/index.php?title=Linker_kit_Base_Shield_for_Raspberry_Pi_with_ADC_Interface&oldid=3456"