LinkerKit
Contents
ArduBlock for Linker Kit
Introduction
ArduBlock is a tile-based visual programming environment, which is designed to make it easy to get start with programming Arduino. We believe that Linker kit is more suitable for starter than breadboard or protoboard approach. We have been working on adding Linkerkit into ArduoBlock.
Installation Guide
- Find the preference path:
- Copy ardublock-all.jar to \arduino-1.0.1\tools\ArduBlockTool\tool\ardublock-all.jar
- ardublock-all.jar can be downloaded from the link below.
- Launch ardublock by:
- Run ArduBlock on pcDuino
- Install ArduBlock on pcDuino following the steps above.
- Launch ArduBlock on pcDuino
- We can create a program by picking the elements in the left column to the work space in right column:
Resources
Linker Kit
- Component List
- 3mm Green LED Module [LINKER_3MMGREEN][118101001-9]
- 3mm Yellow LED Module [LINKER_3MYELLOW][118101001-1]
- 3mm Red LED Module [LINKER_3MMRED][118101001-4]
- 5mm Blue LED Module [LINKER_5MMBLUE][118101001-7]
- 5mm Green LED Module [LINKER_5MMGREEN][118101001-10]
- 5mm Yellow LED Module [LINKER_5MYELLOW][118101001-2]
- 5mm Red LED Module [LINKER_5MMRED][118101001-5]
- 10mm Blue LED Module [LINKER_10MMBLUE][118101001-8]
- 10mm Green LED Module [LINKER_10MMGREEN][118101001-11]
- 10mm Yellow LED Module [LINKER_10MMYELLOW][118101001-3]
- 10mm Red LED Module [LINKER_10MMRED][118101001-6]
- Button Module [LINKER_BUTTON][118101002]
- LDR Module [LINKER_LDR][118101003]
- Tilt Module [LINKER_TLT][118101004]
- Thermal Module [LINKER_TEMP][118101005]
- Linear/Slide Potentiometer Module [LINKER_LINEPOTENT][118101006]
- Touch Sensor Module [LINKER_TOUSEN][118101007]
- Relay Module [LINKER_RELAY][118101008]
- RTC Module [LINKER_RTC][118101009]
- Rotary Potentiometer Module [LINKER_ROTPOTENT][118101010]
- Buzzer Module [LINKER_BUZZER][118101011]
- Hall Sensor [LINKER_HALL][118101012]
- LED Bar [LINKER_LEDBAR][118101013]
- Mosfet Module [LINKER_SSR][118101014]
- Sound Sensor [LINKER_SOUND][118101015]
- Joystick Sensor Module [LINKER_JOYSTK][118101016]
- High Power Led Module [LINKER_HIGHPOWLED][118101017]
- Magnetic Switch [LINKER_MAGSW][118101018]
- Base Shield [LINKER_ARDUINOBASE][118101019]
- Linker kit Base Shield for Raspberry Pi with ADC Interface [LINKER_RPIBASE] [118101020]
- 20cm Cables [LINKER_CAB20CM][118201001]
- 50cm Cables [LINKER_CAB50CM][118201002]
- 100cm Cables [LINKER_CAB100CM][118201003]
- Accelerometer Module [LINKER_DIGI_ACCER][118101022]
- Double Buttons Module [LINKER_DBTN][118102002]
- Infrared Receiver Module [LINKER_INFREV][118101021]
- 4-Digit 7-Segment Module [LINKER_4D7S][118101023]
- OLED Module [LINKER_OLEDRET]
- Vibration Sensor Module [LINKER_VIBSEN]
- Flame Sensor Module [LINKER_FLAMESEN]
- Infrared Distance Sensor [LINKER_INFDIS][118101024]
