Acrylic Clear Enclosure for pcDuino3

Introduction

This is a acrylic clear enclosure for your pcDuino3. The Arduino shield can still be installed on the pcDuino3 when the enclosure is installed.

If your pcDuino V3 is Android system, please only fix 3 copper pillars on pcDuino V3. You can see the details in Usage.

Below is installation instructions.

Step 1

Tear off the wrapping paper.

Step 2

Fix the copper pillars and caps on pcDuino3

Step 3

Fix the bottom plate with screws.

Step 4

Fix the top plate with screws.

Step 5

Paste the stickers on bottom plate.