Acrylic Clear Enclosure for pcDuino3
Contents
Introduction
This is a acrylic clear enclosure for your pcDuino3. The Arduino shield can still be installed on the pcDuino3 when the enclosure is installed.
Caution
If your pcDuino V3 is Android system, please only fix 3 copper pillars on pcDuino V3. You can see the details in Usage.
Parts List
- 1× Acrylic Clear Top Plate for pcDuino3 [IT_ACRY_PCDU3A]] [CB101104]
- 1× Acrylic Clear Bottom Plate for pcDuino3 [IT_ACRY_PCDU3]] [CB101103]
- 4× Copper Pillar [IT_COPPCYL_4+6MM] [WA101103]
- 4× Copper Nut [IT_COPPCYL_6MM] [WA101102]
- 4× M3 Screw [IT_SCREW_6MM] [WB101102]
- 4× Foot Sticker [IT_COM_BUM1204]] [[ZC101101]
Usage
Below is installation instructions.
Step 1
Tear off the wrapping paper.
Step 2
Fix the copper pillars and caps on pcDuino3
Step 3
Fix a copper pillar and a screw on the bottom plate.
Step 4
Fix the bottom plate with screws.
Step 5
Fix the top plate with screws.
Step 6
Paste the stickers on bottom plate.
