1280x800 7" LVDS LCD with Capacitive Touch for pcDuino3
Introduction
This is a 7" LVDS LCD with capacitive touch for pcDuino3. It has a resolution of 1280x800.
Items Included:
- 1 x LVDS screen
- 1 x Driver board
- 3 x Ribbon cable
- 6 x Male to female jumper wires
Wire connection
We need to hook up the 6 pins headers using the male to female jumper wires in the following way:
- gnd of the LCD driver breakout board —> GND of pcDuino
- scl of the LCD driver breakout board —> SCL of pcDuino
- sda of the LCD driver breakout board –> SDA of pcDuino
- rst of the LCD driver breakout board –> D10 of pcDuino
- int of the LCD driver breakout board –> D9 of pcDuino
- wale of the LCD driver breakout board –> D8 of pcDuino
And make sure that the FPC ribbon is installed correctly.
Usage
- Step 1: Update kernel
1)Download the kernel of pcDuino3 :kernel.zip
2)Unzip the "kernel.zip",you will get a folder "kernel", then copy the folder to a USB flash disk.
3)Plug the USB flash disk on your pcDuino3, and put in following command:
$ sudo su
# mount /dev/nanda /mnt/
# ls /mnt/
# rm /mnt/uImage /mnt/script.bin
# ls /media/ (This command is to check the name of your USB flash disk)
# cp /media/40C3-AE90/kernel/* /mnt/ ("40C3-AE90" is the name of your USB flash disk)
# sync
- Step 2: Add the driver of touch screen
1)Download the driver of touch screen gslx680: gslx680
