1280x800 7" LVDS LCD with Capacitive Touch for pcDuino3

Introduction

This is a 7" LVDS LCD with capacitive touch for pcDuino3. It has a resolution of 1280x800.

Items Included:

• 1 x LVDS screen
• 1 x Driver board
• 3 x Ribbon cable
• 6 x Male to female jumper wires

Wire connection

We need to hook up the 6 pins headers using the male to female jumper wires in the following way:

• gnd of the LCD driver breakout board —> GND of pcDuino
• scl of the LCD driver breakout board —> SCL of pcDuino
• sda of the LCD driver breakout board –> SDA of pcDuino
• rst of the LCD driver breakout board –> D10 of pcDuino
• int of the LCD driver breakout board –> D9 of pcDuino
• wale of the LCD driver breakout board –> D8 of pcDuino

And make sure that the FPC ribbon is installed correctly.

Usage

Step 1: Update kernel

• 1.Download the kernel of pcDuino3 :kernel.zip
• 2.Unzip the "kernel.zip",you will get a folder "kernel", then copy the folder to a USB flash disk.
• 3.Plug the USB flash disk on your pcDuino3, and put in following command:

$ sudo su

# mount /dev/nanda /mnt/
# ls /mnt/
# rm /mnt/uImage /mnt/script.bin
# ls /media/ (This command is to check the name of your USB flash disk)
# cp /media/40C3-AE90/kernel/* /mnt/ ("40C3-AE90" is the name of your USB flash disk)
# sync

Then reboot your pcDuino3, you will find the lvds screen is start up.

Step 2: Add the driver of touch screen

• 1.Download the driver of touch screen gslx680: gslx680.zip
• 2.Unzip "gslx680.zip" to get a file "gslx680.ko", put "gslx680.ko" in this path: /lib/modules/3.4.79+/kernel/drivers/input/touchscreen

（Note：open the folder as Root)

• 3.Find the file "modules" in this path: /etc/modules

(Note：open the folder as Root)

Open it in Leafpad, add an row "gslx680":

Save and exit.

• 4.Input driver command:

$ sudo insmod /lib/modules/3.4.79+/kernel/drivers/input/touchscreen/gslx680.ko

Then reboot your pcDuino3 again, you can touch control the screen.

Resources

• Install lvds on pcDuino3