Learning Kit for Scratch for Arduino (S4A)

Description

This is a learning kit for sracth for arduino (S4A). The detailed workshop material can be downloaded from: Elisava Workshop Materials 2011. This kit includes all the parts that are needed by the workshop.

Parts Lits

• 1 x Mini Breadboard(400 holes) [PRT_MINIBRD_400HOS][130201002]
• 2 x 6x6x5 Mini Push Button Switch[IT_TOUSU_6X6X5MM] [IA101101]
• 1 x Plastic mounting plate for breadboard and Arduino w rubber feet [IT_ACRY_ARDUINO]] [CB101102]
• 1 x Photoresistor (LDR) photocell
• 1 x Potentiometer of 10K ohm [IT_RVO9_POT10K] [WG101101]
• 10 x resistor of 560 ohm[IT_RESE560Ω] [HA101103]
• 10 x resistor of 10K ohm[IT_RESE10K][HA101101]
• 2 x 5MM Red LED[IT_LEDRED5MM_FL17MM] [DB101102]
• 2 x 5MM Green LED[IT_LEDGRE5MM_FL17MM] [DB101103]
• 2 x 5MM Yellow LED[IT_LEDYEL5MM_FL17MM] [DB101101]
• Jumper wires
• 2 x SHARP Infrared Proximity Sensor 2Y0A21 with cable
• Robot platform:
  • Two continious servos with wheel [IT_TIRE_DS04NFC][WH101101]
  • 3D printed part
    • 3D motor/servo fix frame [IT_3DMOT_SERFR] [WI101101]
    • 3D omni-directional wheel frame [IT_3DOMNI_DIWHFR] [WI101102]