27-Channel PWM Shield

From LinkSprite Playgound
Revision as of 22:28, 11 February 2016 by Jingfeng (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

27-channel PWM servo Shield

Introduction

This is a 27-channel PWM shield that adds 27 independent PWM servo channels to Arduino or pcDuino.

Pwm32 1.jpg

Caution

There is a jumper labeled P1 on the shield. If the jumper P1 is installed, the Vin of Arduino/pcDuino will be connected to the external power supply Vin+ of the PWM shield. So please remove the jumper P1 when use it on pcDuino, as the Vin of pcDuino cannot exceed 5V.

Pwm32 2.jpg

Specification

  • Number of Channels: 27
  • Driving frequency: Adjustable, default 50Hz (a period of 20ms)
  • Communication Interface: SPI
  • Precision: 5us by default driving frequency 50Hz
  • Optional External power supply: 6～24V

Schematics

Usage

The PWM channels are labeled on the shield as below:

Pwm32 3.jpg

Pwm32 4.jpg

Resources

How to buy

Here to buy 27-Channel PWM Shield on store

Retrieved from "https://wiki.linksprite.com/index.php?title=27-Channel_PWM_Shield&oldid=8040"