Starter Kit for Arduino ---Beginner Full Package

Introduction

This is a starter kit for Arduino beginner.

1 x Cuteduino: An Arduino Uno R3 compatible board.
1 x USB A to B cable
1 x Mini Breadboard
40 x Male to male jumper wire: These are high quality wires that allow you to connect the female headers on the Arduino to the components and breadboard. 40 4" wires, 10 6", and 10 9" wires.
2 x Tri-Color LED: Because everyone loves a blinky. Use this LED to PWM mix any color you need.
2 x Red LEDs: Light emitting diodes make great general indicators.
2 x Green LEDs:Light emitting diodes make great general indicators
2 x Blue LEDs: Light emitting diodes make great general indicators.
2 x Buttons: To interface with outside world
2 x Photocell: - A sensor to detect ambient light. Perfect for detecting when a drawer is opened or when night-time approaches.
2 x Thermistor - A sensor for detecting ambient temperature and temperature changes. 10K thermistor with a negative temperature coefficient.
2 x Potentiometer: 2 adjustable 10K ohm potentiometer can be used to do ADC input experiments.
5 x 300 Ohm Resistors - 5 current limiting resistors for LEDs, and strong pull-up resistors.
5 x 1k Ohm Resistors - 5 current limiting resistors for LEDs, and strong pull-up resistors.
5 x 5K Ohm Resistors - 5 current limiting resistors for LEDs, and strong pull-up resistors.
1 x Buzzer