RB-65CS: Servo with 360 Degree freedom

From LinkSprite Playgound
Revision as of 10:06, 11 November 2012 by Jingfeng (talk | contribs)
Jump to: navigation, search

RB 65CS 1.jpg

Specifications:

  • Control System: +Pulse Width Control 1500usec Neutral
  • Operating Voltage: 4.8-6.0 Volts
  • Operating Temperature Range: 0 to +60 Degree
  • Operating Speed (4.8V): 0.14sec/60° at no load
  • Operating Speed (6.0V): 0.12sec/60° at no load
  • Stall Torque:(4.8V): 6kg·cm ;(6.0V): 6.5kg·cm
  • Dead Band Width: 10usec
  • Connector Wire Length: 300mm
  • Dimensions: 40.8mm X 20.1mm X 38mm
  • Weight: 40g
  • Location of each pin: red (+),brown (-), yellow (signal)

Servo has three wires: Brown, Red and Orange. Brown is GND, Red is VCC, and should be connected to +5V, Orange is the control signal, which is PWM signal.

Note: Don't power your servo from USB port as USB port cannot provide enough current.



RB 65CS 2.JPG