Laser Head for DIY CNC 3 Axis Engraver Machine

From LinkSprite Playgound
Revision as of 06:55, 8 July 2016 by Alvin (talk | contribs) (→‎Specification)
Jump to: navigation, search

Introduction

This is a Laser Head for DIY CNC 3 Axis Engraver Machine PCB Milling Wood Carving Router Kit Arduino Grbl. The parameter is 12V 500mw.

Laser Head (1).jpg

Laser Head (5).jpg

Specification

LaserCNC.png

User Agreement

  • The power of laser module is relatively high, only for industrial use. Lighting directly to eyes is forbidden which will hurt the eyes.
  • It is prohibited to use in the place where there are inflammable materials and gas, or it could cause fires and explosions.
  • Children are prohibited from contacting with the laser product.
  • Do not open the case of this module or it could be damaged.
Retrieved from "https://wiki.linksprite.com/index.php?title=Laser_Head_for_DIY_CNC_3_Axis_Engraver_Machine&oldid=9692"