Zigbee Gateway Controller Module

From LinkSprite Playgound
Revision as of 02:25, 15 July 2016 by Alvin (talk | contribs) (→‎Footprint)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Introduction

1-293.jpg

1-294.jpg


Pin Definitions

1-292.jpg


Footprint

1-295.jpg


Note:

Both Pin8 and Pin18 need to be powered for the module to work.


If we want to use a TTL to USB to connect it to a PC, we can connect in the following way:

  • 3V3 of USB TTL module -> Pin 8 VDD of Zigbee gateway module
  • 3V3 of USB TTL module -> Pin 18 VDD of Zigbee gateway module
  • TXO of USB TTL module -> RXD of Zigbee gateway module
  • RXI of USB TTL module -> TXD of Zigbee gateway module
  • GND of USB TTL module -> GND of Zigbee gateway module


1-296.jpg

Resources

Commands for interfacing ZigBee Sensor Device

Retrieved from "https://wiki.linksprite.com/index.php?title=Zigbee_Gateway_Controller_Module&oldid=9742"