DC to DC step down with a output of 5V@5A

From LinkSprite Playgound
Jump to: navigation, search

Description

When we want to design pcDuino into a real product, we often come into situation where the system can only provide a single voltage, for example, 24V. This DC to DC step down module addresses the problem by allowing a single external system power supply.


Step down 105101019-1.jpg

Step down 105101019-2.jpg

Step down 105101019-3.jpg

Step down 105101019-4.jpg

Specification

Electrical specification

  • Input voltage range: 8V-30V
  • Output voltage: 5V (The module has a pin to connect to an external resistor to adjust the output voltage]
  • Maximum output: 5A (Please use a heatsink when it will need to contentiously provide 4A and above current.

Interface

  • VIN+: The positive terminal for external input power supply
  • VIN-: The ground terminal for external input power supply
  • VOUT+: The positive terminal for output power supply
  • VOUT-: The ground terminal for output power supply
  • Adj: Pin used to adjust the output voltage

Mechanical Size

DC2DC pow.jpg

Retrieved from "https://wiki.linksprite.com/index.php?title=DC_to_DC_step_down_with_a_output_of_5V@5A&oldid=9442"