1024x600 7" LVDS LCD with Capacitive Touch for pcDuino3

From LinkSprite Playgound
Revision as of 14:27, 14 March 2015 by Jingfeng (talk | contribs) (Resources)
Jump to: navigation, search

Description

This is a custom made 7" LVDS LCD with capacitive touch for pcDuino3. It has a resolution of 1024x600.


Pcduino3 lvds screen 1.jpg

Pcduino3 lvds screen 2.jpg


Items Included:

  • 1 x LVDS screen with driver board
  • 1 x Ribbon cable
  • 10 x Male to female jumper wires

Interface

QQ图片20140805142004.jpg

Wire connection

We need to hook up the 10 pins headers using the included male to female jumper wires in the following way:

  • Pin 1 of the LCD driver breakout board —> 5v of pcDuino
  • Pin 2 of the LCD driver breakout board —> GND of pcDuino
  • Pin 3 of the LCD driver breakout board –> D2 of pcDuino
  • Pin 4 of the LCD driver breakout board –> D3 of pcDuino
  • Pin 5 of the LCD driver breakout board –> D4 of pcDuino
  • Pin 6 of the LCD driver breakout board –> GND of pcDuino
  • Pin 7 of the LCD driver breakout board –> D9 of pcDuino
  • Pin 8 of the LCD driver breakout board –> SCL of pcDuino
  • Pin 9 of the LCD driver breakout board –> SDA of pcDuino
  • Pin 10 of the LCD driver breakout board –> D8 of pcDuino

And make sure that the FPC ribbon is installed correctly.

Lvds pcduino.jpg

Usage

To use the LVDS screen, please flash pcDuino3 with the kernel that support LVDS.

As the touch driver hasn't been complied into the kernel for early version, we may want to manullay load it. The touch driver can be downloaded from: https://github.com/pcduino/modules/tree/master/touch/ft5x

Copy ft5x_ts.ko on the pcDuino, and run:

$insmod ft5x_tx.k


IMG 0804.JPG

Resources

How to buy

You can buy it from our online store