Difference between revisions of "1280x800 7" LVDS LCD with Capacitive Touch for pcDuino3"
Qian.zhang (talk | contribs) (→Introduction) |
Qian.zhang (talk | contribs) (→Usage) |
||
Line 34: | Line 34: | ||
==Usage== | ==Usage== | ||
+ | *Step 1: Update kernel | ||
+ | 1)Download the kernel of pcDuino3 :[http://cnlearn.linksprite.com/wp-content/uploads/2014/09/kernel.zip kernel.zip] | ||
+ | 2)Unzip the "kernel.zip",you will get a folder "kernel", then copy the folder to a USB flash disk. | ||
+ | 2)Plug the USB flash disk on your pcDuino3, and put in following command: | ||
+ | $ sudo su | ||
+ | # mount /dev/nanda /mnt/ | ||
+ | # ls /mnt/ | ||
+ | # rm /mnt/uImage /mnt/script.bin | ||
+ | # ls /media/ | ||
+ | # cp /media/40C3-AE90/kernel/* /mnt/ | ||
+ | # sync | ||
+ | |||
− | + | ||
+ | of pcDuino3 ,and add the driver of touch screen [http://cnlearn.linksprite.com/wp-content/uploads/2014/09/gslx680.zip gslx680] | ||
== Resources == | == Resources == | ||
*[http://learn.linksprite.com/pcduino/lvds-screen-for-pcduino/ Install lvds on pcDuino3] | *[http://learn.linksprite.com/pcduino/lvds-screen-for-pcduino/ Install lvds on pcDuino3] |
Revision as of 01:47, 9 January 2015
Introduction
This is a 7" LVDS LCD with capacitive touch for pcDuino3. It has a resolution of 1280x800.
Items Included:
- 1 x LVDS screen
- 1 x Driver board
- 3 x Ribbon cable
- 6 x Male to female jumper wires
Wire connection
We need to hook up the 6 pins headers using the male to female jumper wires in the following way:
- gnd of the LCD driver breakout board —> GND of pcDuino
- scl of the LCD driver breakout board —> SCL of pcDuino
- sda of the LCD driver breakout board –> SDA of pcDuino
- rst of the LCD driver breakout board –> D10 of pcDuino
- int of the LCD driver breakout board –> D9 of pcDuino
- wale of the LCD driver breakout board –> D8 of pcDuino
And make sure that the FPC ribbon is installed correctly.
Usage
- Step 1: Update kernel
1)Download the kernel of pcDuino3 :kernel.zip 2)Unzip the "kernel.zip",you will get a folder "kernel", then copy the folder to a USB flash disk. 2)Plug the USB flash disk on your pcDuino3, and put in following command: $ sudo su
- mount /dev/nanda /mnt/
- ls /mnt/
- rm /mnt/uImage /mnt/script.bin
- ls /media/
- cp /media/40C3-AE90/kernel/* /mnt/
- sync
of pcDuino3 ,and add the driver of touch screen gslx680