Difference between revisions of "1280x800 7" LVDS LCD with Capacitive Touch for pcDuino3"
Qian.zhang (talk | contribs) (→Usage) |
Qian.zhang (talk | contribs) (→Usage) |
||
Line 38: | Line 38: | ||
2)Unzip the "kernel.zip",you will get a folder "kernel", then copy the folder to a USB flash disk. | 2)Unzip the "kernel.zip",you will get a folder "kernel", then copy the folder to a USB flash disk. | ||
2)Plug the USB flash disk on your pcDuino3, and put in following command: | 2)Plug the USB flash disk on your pcDuino3, and put in following command: | ||
+ | |||
$ sudo su | $ sudo su | ||
− | # mount /dev/nanda /mnt/ | + | # mount /dev/nanda /mnt/ |
− | # ls /mnt/ | + | # ls /mnt/ |
− | # rm /mnt/uImage /mnt/script.bin | + | # rm /mnt/uImage /mnt/script.bin |
− | # ls /media/ | + | # ls /media/ |
− | # cp /media/40C3-AE90/kernel/* /mnt/ | + | # cp /media/40C3-AE90/kernel/* /mnt/ |
− | # sync | + | # sync |
Revision as of 01:48, 9 January 2015
Introduction
This is a 7" LVDS LCD with capacitive touch for pcDuino3. It has a resolution of 1280x800.
Items Included:
- 1 x LVDS screen
- 1 x Driver board
- 3 x Ribbon cable
- 6 x Male to female jumper wires
Wire connection
We need to hook up the 6 pins headers using the male to female jumper wires in the following way:
- gnd of the LCD driver breakout board —> GND of pcDuino
- scl of the LCD driver breakout board —> SCL of pcDuino
- sda of the LCD driver breakout board –> SDA of pcDuino
- rst of the LCD driver breakout board –> D10 of pcDuino
- int of the LCD driver breakout board –> D9 of pcDuino
- wale of the LCD driver breakout board –> D8 of pcDuino
And make sure that the FPC ribbon is installed correctly.
Usage
- Step 1: Update kernel
1)Download the kernel of pcDuino3 :kernel.zip 2)Unzip the "kernel.zip",you will get a folder "kernel", then copy the folder to a USB flash disk. 2)Plug the USB flash disk on your pcDuino3, and put in following command:
$ sudo su
# mount /dev/nanda /mnt/ # ls /mnt/ # rm /mnt/uImage /mnt/script.bin # ls /media/ # cp /media/40C3-AE90/kernel/* /mnt/ # sync
of pcDuino3 ,and add the driver of touch screen gslx680